1 In
1-1/2 In
Part #:PVCBA112
- JBA30 1 1/2" PVC JUNCTIONBOX ADPT SCEPTER
PVC MATERIAL PVC CONDUIT TO BOX CONNECTION TYPE UL APPROVAL 50 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 1.5 TRADE SIZE IN INCH 1-1/2 TRADE SIZE - FRACTIONAL
Qty:
Part #:STSSCN112
- SET SCREW TYPE STEEL MATERIAL IMC/RIGID/EMT CONDUIT USED ON UL 514B, CUL APPROVAL 10 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB1 INCLUDES (2) SET SCREW
$
2.02
Qty:
Part #:CRC02094
- WATER WHITE COLOR -40 TO 400 DEG F TEMPERATURE RATING CAN CONTAINER TYPE 10 OUNCE CONTAINER SIZE SILICONE BASE 0 DEG F FLASH POINT AEROSOL, LIQUID PHYSICAL FORM ROHS COMPLIANT UNIT PACKAGE 16 OUNCE FILM TYPE DRY, CLEAR, NON-HARDENING ODOR MILD SOLVENT BOILING POINT 118.4 DEG F PROPELLANT TYPE HYDROCARBON DIELECTRIC STRENGTH 350 MILLIVOLT SPECIFIC GRAVITY 0.6694 EVAPORATION RATE FAST VAPOR PRESSURE 1577.3 HECTOPASCAL VAPOR DENSITY GREATER THAN 1 (AIR EQUAL TO 1) VOC CONTENT 649.9 GPL OVERALL DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 7.75 INCH HEIGHT APPLICABLE STANDARD NSF H1
$
12.91
Qty:
Part #:CRC14077
- POLYURETHANE TYPE TAN COLOR UL APPLICABLE STANDARD FILLING, INSULATING, SEALING, BONDING, HVAC, ELECTRICAL, INDUSTRIAL, PLUMBING, AROUND ELECTRICAL OUTLET, UTILITY PANEL, DUCT, PIPE, DOOR, WINDOW, BASE PLATE, JOINT, CRACK, CRAWLSPACE, FOUNDATION, SPOT INSULATING, TOUCH-UP APPLICATION -200 TO 200 DEG F TEMPERATURE RATING AEROSOL CAN CONTAINER TYPE 16 OUNCE CONTAINER CAPACITY 12 TO 24 HOUR (CURE TIME) SETTING TIME ROHS COMPLIANT OVERALL DIMENSION 2.19 INCH WIDTH X 2.19 INCH DEPTH X 8.06 INCH HEIGHT SPECIFIC GRAVITY 1.2 VOC CONTENT 35 GRAM PER LITER NET FILL 12 OUNCE
$
16.54
Qty:
Part #:KO100
- SNAP-IN TYPE STEEL MATERIAL 1 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 500
$
0.68
Qty:
Part #:FXCN112
- STRAIGHT TYPE DIE-CAST ZINC MATERIAL 2.09 INCH SQUEEZE INSTALLATION UL APPROVAL 50 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 1.68 TO 1.94 INCH CORD SIZE NON-INSULATED THROAT TYPE FLEX METAL CONDUIT SINGLE CABLE OPENING
$
6.15
Qty:
$
2.30
Qty:
Part #:KO100P
- SNAP-IN TYPE NYLON 6/6 MATERIAL UL APPROVAL 1 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 500
$
1.30
Qty:
Part #:IGB100
- DIE-CAST ZINC, PLASTIC LINER MATERIAL RIGID CONDUIT USED ON 14 AWG SOLID TO 4 AWG STRANDED WIRE SIZE COPPER/ALUMINUM CONDUCTOR MATERIAL UL 467, UL 514B APPROVAL 250 STANDARD PACKAGE 1 INCH TRADE SIZE INSULATED THROAT TYPE LAY-IN, ALUMINUM LUG TYPE ROHS COMPLIANT TEMPERATURE RATING 150 DEG C (LINER)
$
3.91
Qty:
Part #:IGB112
- DIE-CAST ZINC, PLASTIC LINER MATERIAL RIGID CONDUIT USED ON 14 AWG SOLID TO 4 AWG STRANDED WIRE SIZE COPPER/ALUMINUM CONDUCTOR MATERIAL UL 467, UL 514B APPROVAL 125 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE INSULATED THROAT TYPE LAY-IN, ALUMINUM LUG TYPE ROHS COMPLIANT TEMPERATURE RATING 150 DEG C (LINER)
$
8.22
Qty:
Part #:KO112
- SNAP-IN TYPE STEEL MATERIAL 1-1/2 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 250
$
1.34
Qty:
Part #:PB112
- POLYPROPYLENE MATERIAL IMC/RIGID CONDUIT USED ON UL 514C APPROVAL 105 DEG C TEMPERATURE RATING 250 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE NON-INSULATED THROAT TYPE ROHS COMPLIANT COLOR GRAY
$
0.44
Qty:
Part #:STCMCN112
- COMPRESSION TYPE STEEL MATERIAL EMT CONDUIT USED ON UL 514B APPROVAL 5 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
3.29
Qty:
Part #:PB100
- POLYPROPYLENE MATERIAL IMC/RIGID CONDUIT USED ON UL 514C APPROVAL 105 DEG C TEMPERATURE RATING 250 STANDARD PACKAGE 1 INCH TRADE SIZE NON-INSULATED THROAT TYPE ROHS COMPLIANT COLOR GRAY
$
0.25
Qty:
Part #:EMTEL112-22-1/2
- STEEL MATERIAL GALVANIZED FINISH UL 797, CSA APPROVAL ANSI C80.3, WW-C-563 APPLICABLE STANDARD 15 PER CASE STANDARD PACKAGE 1-1/2 INCH TRADE SIZE PLAIN END TYPE 22 DEGREE BEND ANGLE 8.25 INCH BEND RADIUS
$
10.45
Qty:
Part #:DOTKO150
- KNOCKOUT SEAL, SNAP-IN TYPE ZINC PLATED STEEL MATERIAL CONDUIT USED ON 1-1/2 INCH TRADE SIZE SERIES KO MODEL
$
1.04
Qty:
Part #:CUTDS100H1
- THREADED HUB TYPE NEMA 3R USED ON 1 INCH HUB SIZE 1 HUB(S) SWITCH RATING DOUBLE THROW THROUGH 100 AMPERE
Qty:
Part #:CUTBHT
- Eaton Handle Tie Bar for Type BR Circuit Breakers,Handle lock/tie,BR,1 in,Quantity 10,BR Loadcenter
Qty:
Part #:CUTBHLW2
- NON-PADLOCKABLE TYPE BR SERIES CIRCUIT BREAKER USED ON 2/3 POLE(S) ON/OFF LOCKING PROVISION
$
13.73
Qty:
Part #:2B
- CONDUIT HANGER WITH BOLT TYPE 18 GAUGE STEEL MATERIAL BRIGHT ZINC ELECTROPLATED FINISH UL (CANADA AND US) APPROVAL 100 STANDARD PACKAGE 2 INCH TRADE SIZE 1/4 INCH MOUNTING HOLE SIZE 1 INCH RIGID/EMT CONDUIT TYPE SCREW SIZE 1/4 INCH X 1 INCH
$
0.71
Qty:
Part #:CB100
- DIE CAST ZINC MATERIAL RIGID CONDUIT USED ON UL APPROVAL 500 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE CB MODEL
$
5.47
Qty:
Part #:SERCN100
- DIE-CAST ZINC MATERIAL (2) SCREW INSTALLATION ROMEX/NON-METALLIC CABLE CABLE TYPE (3) 8 TO 4 AWG (OVAL/ROUND CABLE), 12/3 TO 8/3 AWG (NON-METALLIC CABLE) CABLE SIZE UL APPROVAL 250 STANDARD PACKAGE 1 INCH TRADE SIZE NON-INSULATED, ROUND/OVAL SHAPE THROAT TYPE
$
3.26
Qty:
Part #:SERCN112
- DIE-CAST ZINC MATERIAL (2) SCREW CLAMP INSTALLATION NON-METALLIC SHEATHED/ROMEX CABLE CABLE TYPE (3) 1 AWG, (3) 1/0 AWG, (3) 2/0 AWG CABLE SIZE UL APPROVAL 50 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE NON-INSULATED, OVAL SHAPE THROAT TYPE
$
4.50
Qty:
Displaying: 1 - 24 of 25 Matching Items