Flashlights & Battery Accy
View:
Active Filters :
- Main Category: Flashlights & Battery Accy
Part #:KIDI9040E
- The Fire Sentry i9040 smoke alarm is a battery operated smoke alarm that utilizes ionization sensing technology. The four (4) inch unit is smaller in diameter giving it discreet design with the same quality you would expect in a Kidde manufactured product. The i9040 is powered by a 9V battery, providing continuous protection, even during power outages. This easy to install unit includes a test button to verify the detection electronics are working as intended.
Benefits
The Fire Sentry i9040 battery operated, single station smoke alarm provides an early warning signal to you and your family in the event of a fire hazard. The i9040 operates on a 9V battery power source that provided continuous protection even during a power outage, Installation is easy, no wiring required. This unit is UL Listed and includes a 3 year limited warranty.
This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Battery Operated (9V Battery Included) &ndash Easy installation and provides continuous protection even during power outages.
Test Button &ndash Tests unit&rsquos electronic circuitry, horn and battery function.
Low Battery Indicator &ndash Low battery warning chirp alerts user to change battery.
Discreet Design &ndash Four (4) inch diameter.
Technical Specifications
Model Number
i9040
Power Source
9V Battery (included)
Audio Alarm
85dB at 10ft
Temperature Range
40F to 100F (4°C to 38°C)
Humidity Range
up to 85% relative humidity (RH)
Sensor
Ionization
Size
4&rdquo in diameter x 1.45&rdquo depth
Weight
.5lbs
Interconnects
No
Warranty
3 year limited
$
8.13
Qty:
Part #:KIDI9050
- The Kidde i9050 is a full size, ionization, battery operated smoke alarm designed to protect you and your family from the dangers of smoke and fire. The i9050 is powered by a 9V battery, providing continuous protection even during power outages. This unit includes a flashing red LED to indicate the alarm is receiving power. The i9050 is UL Listed and includes a 10 year limited warranty.
Benefits
The Kidde i9050 basic, battery operated smoke alarm provides you and your family an early warning signal against the dangers of fire and smoke. This easy to install smoke alarm includes a test button to verify the unit&rsquos electronic circuitry, horn and battery function are work properly. The i9050 also includes a tamper resist feature to help deter theft or tampering. This smoke alarm is powered by a 9V battery and is suitable for all living areas. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation &ndash No wiring required.
Battery Operated (9V battery included) &ndash Provides continuous protection even during power failures.
Quality Design &ndash 10 year limited warranty.
Flashing LED &ndash Indicates alarm is receiving power.
Test Button &ndash Verifies battery and alarm operation.
Low Battery Indicator &ndash Chirps when battery needs replacement.
Technical Specifications
Model
i9050
Power Source
9V Battery (included)
Audio Alarm
85dB at 10ft
Temperature Range
40F to 100F (4C to 38C)
Humidity Range
up to 85% relative humidity (RH)
Sensor
Ionization
Size
5&rdquo in diameter x 1.75&rdquo depth
Weight
.62lbs
Interconnects
No
LED
Red, normal operation
Warranty
10 year limited warranty
$
9.22
PK
Qty:
Part #:KIDHD135F
-
The Kidde HD135F is a 120VAC Wire In Heat Alarm that responds to temperature rather than smoke.
The Kidde HD135F 120VAC wire in heat alarm gives you and your family an early warning to dangerous temperatures of 135F or more
This unit also includes a tamper resist pin that helps to deter thief and tampering.
This unit can be used as a single station unit or it can be interconnected to up to 24 Kidde devices in a multiple station arrangement
The Kidde HD135F is a 120VAC Wire In Heat Alarm that responds to temperature rather than smoke. The alarm will sound if temperatures rise above 135F. The Kidde HD135F is interconnectable. The interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiating devices (Smoke, heat, CO, etc) interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. This unit includes a 5-year limited warranty and is UL Listed.
Interconnectable &ndash Interconnects with up to 24 Kidde devices of which 18 can be initiating.
Test Button &ndash Tests unit&rsquos electronic circuitry, horn and battery function.
9V Battery Back Up &ndash Provides continuous protection even during power outages.
Red LED &ndash Flashes every 30-40 seconds to indicate proper operation.
Low Battery Indicator &ndash Alerts user in the event of alow or missing battery.
Quick Connect Power Harness &ndash Makes installation fast and easy.
Technical Specifications
Model
HD135F
UPC Number
0-25417-84135-0
Power Source
120VAC, 60HZ, 9V battery backup
Sensor
Heat
Audio Alarm
85dB at 10ft
Temperature Range
-20F to +100F (-29C and +38C)
Humidity Range
5%-95% relative humidity (RH)
Size
5&rdquo in diameter x 2&rdquo depth
Weight
.75lbs
Interconnects
Up to 24 Kidde devices of which 18 can be initiating devices.
LED
Green, AC power present, alarm mode flashing Red indicates originating unit
Warranty
5 year limited warranty
$
34.89
Qty:
Part #:SMI100
- SMOKE ALARM TYPE DUAL IONIZATION OPERATION TYPE UL 217 APPROVAL 85 DB AT 10 FT HORN TYPE 9 V BATTERY VOLTAGE RATING/SOURCE RED LED INDICATING DC POWER LED/STROBE TYPE BRK[R] BRAND SIZE 4.25 INCH DIA X 1.6 INCH H CARBON ZINC BATTERY FG250 MODEL
$
13.86
Qty:
$
46.59
Qty:
Part #:BRKSMICO105-AC
$
72.75
Qty:
Part #:BRK1038510
- 120V LED Strobe Light, ADA Compliant This AC hardwired signaling device is designed to meet the needs to the ADA where a 177 candela strobe light is required for deaf & hard of hearing residential and institutional applications.
» Smart Strobe &ndash Separate flash patterns to distinguish between smoke and carbon monoxide » 177 Candela LED &ndash Powerful LED strobe light provides effective visual warning intended to waken hearing impaired residents » Strobe Signal Synchronization &ndash when multiple units installed, strobes flash in unison » 1Hz Flash Rate &ndash Meets ADA, ANSI 117.1, NFPA 72 and UL STD 1971 » Slim design » 10-Year End-of-Life Timer » 10-Year Limited Warranty
$
70.16
Qty:
Part #:SMI100-AC
- 120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money.
» Single button test/silence » 9V Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Smart Technology - helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » 10-Year Limited Warranty
$
14.91
Qty:
Part #:SMICO100-AC
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
61.28
Qty:
Part #:KIDSM120X
- 60 HZ FREQUENCY RATING 120 VAC VOLTAGE RATING
$
8.54
Qty:
Part #:KIDKN-COSM-BA
- Description
The Kidde KN-COSM-BA Combination Carbon Monoxide & Smoke Alarm provides two important safety devices in a single unit. This alarm includes a voice warning system that announces &ldquoFire, Carbon Monoxide, Low Battery and Smart HushTM Activation.&rdquo The voice alarm eliminates any confusion and clearly warns you and your family of a smoke or carbon monoxide danger, or if your battery is in need of replacement. This technologically advanced combination alarm is battery operated protecting you and your family even during a power outage when many incidences occur.
The KN-COSM-BA is an easy to install alarm that is suitable for all living areas and has a 10-year life and a 5-year limited warranty. This alarm uses ionization sensing technology. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms.
Alarm Warnings
Fire
The red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message &ldquoFIRE!&rdquo. The alarm pattern will repeat until smoke is eliminated.
Carbon Monoxide
Four short alarm beeps followed by a verbal warning &ldquoWARNING! CARBON MONOXIDE!&rdquo This continues until the unit is reset or the CO is eliminated.
Low Battery
If any form of battery failure is detected the red LED light will flash and the unit will &ldquochirp&rdquo once every 60 seconds for at least 7 days. The &ldquoLOW BATTERY&rdquo voice occurs once every 15 minutes. The green LED will also be flashing twice per second.
Voice Hush Indication
&ldquoHUSH MODE ACTIVATED&rdquo and &ldquoHUSH MODE CANCELLED&rdquo voice announcement.
Peak Level Memory
If the alarm had detected a CO level of 100ppm or higher, the unit will announce &ldquoCARBON MONOXIDE PREVIOUSLY DETECTED&rdquo to warn of the CO incident, when the Test/ Reset button is pressed.
Voice Alarm &ndashAnnounces the hazard type detected thereby helping to speed up the correct reaction to the hazard detected. Alarm announces &ldquoFire!&rdquo when a smoke or fire hazard is detected and announces &ldquoWarning Carbon Monoxide&rdquo when a CO hazard is detected.
Combined Carbon Monoxide and Smoke Alarm &ndash A single unit can be installed where previously, two were needed. Reduces installation time and helps to keep home décor attractive.
Test/Reset Button &ndash Tests alarm circuitry and triggers the voice announcement.
LEDs &ndash Flashing green for normal operation and flashing red for alarm condition.
Low Battery Warning &ndash The unit warns of a low battery condition by announcing &ldquolow battery&rdquo and by initiating an alarm chirp and activating a flashing red LED.
Battery Powered &ndash Provides protection even during power outages when many fire and carbon monoxide incidents occur.
Battery Safeguard &ndash The battery door will not close unless the batteries are properly installed.
Hush® Feature &ndash Temporarily silences nuisance alarms.
Ionization Smoke Alarm Sensor
Technical Specifications
Model
KN-COSM-BA
Power Source
2 AA Battery
Sensor
Smoke Ionization, CO Electrochemical
Audio Alarm
85dB at 10ft
Temperature Range
40F (4.4C) to 100F (37.8C)
Humidity Range
10%-95% relative humidity non-condensing
Size
5.6&rdquo in diameter x 1.8&rdquo depth
Weight
13oz
Interconnects
No
$
50.49
Qty:
Part #:KIDI4618A
- The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation
&bull Front battery pull tab allows battery activation without removing alarm from mounting bracket.
&bull Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
&bull Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
&bull Large centrally located Test/Hush® alarm control button.
&bull Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
User-Friendly Features
&bull Easy access front loading battery door.
&bull Battery backup provides protection in case of power failure.
&bull Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user&rsquos guide for complete instructions.
Technical Specifications
Model
i4618
UPC
0-47871-07581-2
Power Source
120VAC (80mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40°F (4.4°C) to 100°F (37.8°C)
Humidity Range
Up to 85% relative humidity (RH)
Size
5.6 in diameter x 1.8 in depth
Weight
.5lbs
Interconnects
Up to 24 Kidde devices
LED
Green, receiving ac power,Red, 4 modes of operation
Warranty
5 year limited
$
12.77
Qty:
Part #:KIDP3010K-CO
- The Kidde P3010K-CO is a 10-year, sealed battery, smoke and carbon monoxide alarm that features photoelectric and electrochemical sensing technology with Smart Hush feature. This combination alarm combines the detection capabilities of a photoelectric sensor with that of an electrochemical sensor, which is used to detect CO. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one.
This constant communication enhances the alarm&rsquos overall performance and significantly reduces the potential for a nuisance alarm. The sealed in lithium battery will power the unit for the entirety of its 10 year life, eliminating the need for battery replacement and worry about unauthorized battery removal. The alarm provides continuous protection from smoke and carbon monoxide, even during power outages. The alarm will automatically activate when it is attached to the mounting bracket there are no pull-tabs, no switches, everything is automatic. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. The customer can use a simple tool such as a screwdriver to deactivate the unit, stopping the chirp and making it safe for disposal. Industry experts (such as the NFPA), recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms.
Kidde Worry-Free Kitchen Smoke & Carbon Monoxide Alarm
Part Number(Ordering Number)21009667
Combination Smoke and Carbon Monoxide Alarm &ndash Smoke and CO sensing technologies work together to detect real fires faster and reduce cooking-related nuisance alarms.
Sealed-In Lithium Battery &ndash Sealed-in lithium power supply no battery replacement required over the 10 year life of the alarm. Eliminates worry about battery removal or unauthorized deactivation of alarm.
Photoelectric Sensor &ndash Smoke alarm contains advanced photoelectric sensor that may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
Self Activation &ndash Alarm automatically activates when attached to the mounting bracket.
Alarm Memory &ndash Rapidly flashing LED alerts user if the alarm has sounded since the last time the test/reset button was used.
Test/Hush Button &ndash Tests alarm circuitry and activates Hush features.
Smart HushTM &ndash Temporarily silences nuisance alarms for approximately 10 minutes and will not allow hush mode unless the unit is in alarm mode.
LED &ndash Red LED will blink in conjunction with the alarm sound.
End of Life Warning &ndash Alarm chirps every 30 seconds to indicate the unit is in need of replacement.
End of Life Hush® &ndash End of life indication can be silenced three days at a time up to 30 days to allow for alarm replacement at a more convenient time.
UL217 and UL2034 Listed
10 Year Limited Warranty
Technical Specifications
Model
P3010K-CO
Power Source
Sealed Lithium Battery
Sensor
SmokePhotoelectric
CO
Electrochemical
Audio Alarm
85dB at 10ft
Temperature Range
40F (4.4C) to 100F (37.8C)
Humidity Range
10%-95% non-condensing relative humidity (RH)
Size
5.22&rdquo in diameter x 1.6&rdquo depth
Weight
1 lb.
Interconnects
No
Warranty
10 year limited
$
45.45
Qty:
Part #:KIDI12010S
- The Kidde i12010S is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with sealed-in lithium battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home.
The i12010S contains a 10-year tamper proof battery that eliminates the need for battery replacement, and ends worry over unauthorized battery removal. The alarm provides continuous protection from smoke and fire, even during power outages. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. The customer can use a simple tool such as a screwdriver to deactivate the unit, stopping the chirp and making it safe for disposal. The end of life signal can be temporarily silenced to allow for replacement at a more convenient time.
Easy Installation
Battery backup automatically activates when the alarm is attached to mounting bracket.
Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
10-year sealed battery substitutes need for routine 9V replacement.
Large centrally located Test/Hush® alarm control button silences nuisance alarms for approximately 9 minutes.
Dust cover protects sensor from contaminates during construction, reducing nuisance alarms.
User-Friendly Features
Red LED indicates alarm mode, Green LED indicates AC power is present.
Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user guide for complete instructions.
End of Life Hush feature allows user to temporarily silence end of life chirp 3 days at a time for a maximum of 30 day life extension.
Technical Specifications
Model
i12010S
Power Source
120VAC (60 Hz, 45mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40F (4.4C) to 100F (37.8C)
Humidity Range
Up to 95% relative humidity (RH), non-condensing
Size
5.5&rdquo in diameter x 1.75&rdquo depth
Weight
.45lbs
Interconnects
Up to 24 Kidde devices
Warranty
10 year limited
$
25.86
Qty:
Part #:KIDI12010SCO
- The Kidde i12010SCO is a hardwired combination smoke and carbon monoxide alarm that contains a 10-year, sealed battery backup. This alarm uses breakthrough technology to offer a fast response to real fires, including smoldering and fast-flaming, as well as protect you from carbon monoxide and dramatically reduce the chance of nuisance alarms. The Intelligent sensor technology combines the detection capabilities of an ionization smoke sensor &ndash which is more likely to detect smaller, less visible fire particles, like those produced by flaming fires &ndash with that of an electrochemical sensor, which is used to detect CO. Since carbon monoxide is present in all fires, having both detection chambers work together in one alarm is a breakthrough in the fire safety industry. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one. This constant communication enhances the alarm&rsquos overall performance in all fires, and significantly reduces the potential for a nuisance alarm.
Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms. The i12010SCO contains a 10-year tamper proof backup battery that eliminates the need for battery replacement, and ends worry over unauthorized battery removal. The alarm provides continuous protection from smoke, fire and carbon monoxide, even during power outages. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. The end of life chirp can be temporarily silenced, allowing for replacement at a more convenient time.
Sealed-In Lithium Battery Backup- No battery replacement required over the 10 year life of the alarm. Eliminates worry about removal or unauthorized deactivation of alarm.
Voice Warning System- Verbally announces &ldquoFIRE!&rdquo or &ldquoWARNING! CARBON MONOXIDE&rdquo to help distinguish between threats.
Smart Interconnect- Interconnects up to 24 Kidde devices (of which 18 can be initiating)
Hush Feature- Temporarily silences nuisance alarms for approximately 9 minutes and will not allow hush mode unless the unit is in alarm mode.
Peak Level Memory- Announces &ldquoCARBON MONOXIDE PREVIOUSLY DETECTED&rdquo if alarm has detected CO level of 100ppm or higher since it was last reset.
Ionization Sensing Technology- Ideal for detecting fast flaming and other types of fires.
Green LED- Illuminates to indicate the unit is receiving AC power. Flashes once every 60 seconds to indicate battery only mode. Flashes once per second during alarm to indicate initiating alarm. Flashes once every 16 seconds to indicate smoke or CO previously detected. Flashes every 2 seconds while the alarm is in HUSH mode.
Red LED- When a dangerous level of smoke or carbon monoxide is detected the red LED will flash. If the unit malfunctions, the red LED will flash and the unit will chirp every 30 seconds.
Discount for purchases of two or more!
$
54.14
Qty:
Part #:900CUAR
- Description
The Kidde KN-COSM-IBA uses breakthrough technology to offer a fast response to real fires, including smoldering and fast-flaming, as well as protect you from carbon monoxide and dramatically reduce the chance of nuisance alarms. The Intelligent sensor technology combines the detection capabilities of an ionization smoke sensor &ndash which is more likely to detect smaller, less visible fire particles, like those produced by flaming fires &ndash with that of an electrochemical sensor, which is used to detect CO. Since carbon monoxide is present in all fires, having both detection chambers work together in one alarm is a breakthrough in the fire safety industry. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one. This constant communication enhances the alarm&rsquos overall performance in all fires, and significantly reduces the potential for a nuisance alarm.
Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms.
Alarm Warnings
Fire
The red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message &ldquoFIRE!&rdquo. The alarm pattern will repeat until smoke is eliminated.
Carbon Monoxide
Four short alarm beeps followed by a verbal warning &ldquoWARNING! CARBON MONOXIDE!&rdquo This continues until the unit is reset or the CO is eliminated.
Low Battery
One chirp followed by warning &ldquoLOW BATTERY.&rdquo The red LED light will flash. This pattern will continue every minute for at least seven days. Under battery power, the &ldquoLOW BATTERY&rdquo voice only occurs once every 15 minutes.
Voice Hush Indication
&ldquoHUSH MODE ACTIVATED&rdquo and &ldquoHUSH MODE CANCELLED&rdquo voice announcement.
Peak Level Memory
If the alarm had detected a CO level of 100ppm or higher when the Test/Reset button is pressed, the unit will announce &ldquoCARBON MONOXIDE PREVIOUSLY DETECTED&rdquo to warn of the CO incident.
Smart Interconnect&trade- Interconnects up to 24 Kidde devices (of which 18 can be initiating).
Battery Backup (2-AA batteries included)- Provides protection during power outages.
Front Loading Battery Door- Replace the backup batteries without disconnecting from mounting bracket
Battery Lockout System- The battery door will not close unless the batteries are properly installed.
Alarm Tamper Resist- Helps deter from tampering and theft.
Adjustable Mounting Bracket- Makes installation fast and easy. Works with existing smoke and combination smoke and CO mounting brackets.
Peak Level Memory- Announces &ldquoCARBON MONOXIDE PREVIOUSLY DETECTED&rdquo if alarm has detected a CO level of 100ppm or higher since it was last reset.
Hush&trade Feature- Silences nuisance alarms for approximately 9 minutes. (Smoke must be present before Hush&trade is activated)
Ionization Sensor Technology- Ideal for detecting fast flaming and other types of fires.
Test Button Functions&ndash Tests the unit for proper operation
Peak Level memory
Resets the Carbon Monoxide alarm
Green LED- Illuminates to indicate the unit is receiving AC power. Flashes once every 60 seconds to indicate battery only mode. Flashes once per second during alarm to indicate initiating alarm. Flashes once every 16 seconds to indicate smoke or CO previously detected. Flashes every 2 seconds while the alarm is in HUSH&trade mode.
Red LED- When a dangerous level of smoke or carbon monoxide is detected the red LED will flash. If the unit malfunctions, the red LED will flash and the unit will chirp every 30 seconds.
Technical Specifications
Model
KN-COSM-IBA
Power Source
120VAC, 60Hz 45mA max per alarm 2 AA battery backup
SmokeSensor
Ionization
CoSensor
Electrochemical
Audio Alarm
85dB at 10ft
Temperature Range
40F (4.4C) to 100F (37.8C)
Humidity Range
10%-95% relative humidity, non-condensing
Size
5.6&rdquo in diameter x 1.8&rdquo depth
Weight
1 lb.
Wiring
Quick connect plug with 6&rdquo pigtails
Interconnects
Up to 24 Kidde devices (of which 18 can be initiating)
Warranty
10 year limited
$
37.34
Qty:
Part #:KIDP4010DCSCO-W
- The P4010DCSCO-W is a 10-year, sealed battery smoke and carbon monoxide (CO) alarm that features supervised wire-free interconnect capability and provides enhanced intelligibility for users. The voice warning feature accompanies the 85dB tone during an alarm event, and helps reduce confusion with verbal announcements such as &ldquoReplace alarm&rdquo at end of alarm life, and &ldquoHush mode activated&rdquo when a nuisance alarm is silenced. The three color LED ring helps users quickly determine standby, alarm, or error mode of the alarm.
Kidde P4010 Series Alarms contain 10-year tamper proof batteries that eliminate the need for battery replacement, and ends worry over unauthorized removal. Users are further shielded from late night battery chirps by the unit&rsquos Ambient Light Sensing feature, which establishes a day/night cycle and prevents alarm chirping in dark conditions.
Wire-Free Interconnect triggers each connected alarm in the home to sound once smoke is detected, which can provide more time to react. The National Fire Alarm and Signaling Code (NFPA 72) has required smoke alarms in new homes to be interconnected since 1989, which traditionally involves running wiring to each alarm. Older and remodeled homes can now be updated to current standards without having to run any wiring to each alarm through walls and ceilings. Existing networks of interconnected alarms can be expanded with use of a single AC Wire-Free Alarm and additional compatible DC Wire-Free alarms.
Additional benefits and features are available when used in conjunction with the Kidde RemoteLync Bridge, which connects P4010 Wire-Free alarms via your home&rsquos Wi-Fi to your smart device. Additional information such as battery life and sensor health status are available from each assigned room location. Weather alerts, and intruder alerts (when used with the Kidde RemoteLync camera), can be sent to each connected alarm, creating an easy to install fire &ndash security &ndash weather &ndash warning system from one network of devices.
10-Year Sealed Lithium BatteryEliminates late night battery chirp
Voice Notifications
Bug Screen Protects alarm from insect ingression
Flashing LED Status RingAllows easy identification of current state of alarm
Supervised Wire-Free InterconnectProprietary radio signal joins multiple alarms together, so when one alarm sounds they all sound. User is alerted if an alarm loses connection to the network.
Sealed-in Lithium Battery No battery replacement required over the 10 year life of the alarm. Eliminates worry about battery removal or unauthorized deactivation of alarm.
10-Year Limited Warranty
Compatible with RemoteLync Bridge Connect to the Kidde app for additional features and benefits.
End of Unit Life Warning Alerts user the alarm is in need of replacement.
Test&thinsp/&thinspHush® Button Tests alarm circuitry and activates Hush® feature to temporarily silence nuisance alarms for up to 10 minutes. End of Unit Life and Network Error chirps can also be silenced.
Alarm Locate Feature Quickly find initiating alarm by silencing other alarms in the network.
Ambient Light Sensing Establishes Day/Night cycle and prevents chirping during the night until the next Day cycle begins.
Intelligent Sensor Technology Reduces nuisance alarms and offers fast response to real fires.
Easy to Install Simply turn the switch on the back of unit or mount to bracket to activate the alarm. Multiple units can be interconnected with push of one button.
Voice Notifications Unit verbally announces &ldquoFire!&rdquo and other alerts such as &ldquoReplace Alarm,&rdquo which helps the user better understand current status of the unit.
Technical Specifications
Model
P4010DCSCO-W
Power Source
Sealed Lithium Batteries
SmokeSensor
Photoelectric
CoSensor
Electrochemical
Audio Alarm
85dB at 10ft
Temperature Range
40F (4.4C) to 100F (37.8C)
Humidity Range
10% to 95% relative humidity (RH), non-condensing
Size
5.59&rdquo in diameter x 1.91&rdquo depth
Weight
.6lb
Interconnects
Up to 24 Kidde devices
Warranty
10year limited
$
70.97
Qty:
Part #:I12040
- SMOKE ALARM WITH STROBE LIGHT TYPE AC/DC IONIZATION OPERATION TYPE UL APPROVAL 85 DB AT 10 FT HORN TYPE 120 VAC 60 HZ WITH 9 V BATTERY BACKUP VOLTAGE RATING/SOURCE LED INDICATING CONDITION LED/STROBE TYPE 24 INTERCONNECTION(S) SIZE 6.5 INCH W X 13.25 INCH D X 6 INCH H
$
23.04
Qty:
Displaying: 1 - 18 of 18 Matching Items