4 in Width X 2-1/8 in Depth X 4 in Height
1-1/2 In
View:
Part #:PVCBA112
- JBA30 1 1/2" PVC JUNCTIONBOX ADPT SCEPTER
PVC MATERIAL PVC CONDUIT TO BOX CONNECTION TYPE UL APPROVAL 50 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 1.5 TRADE SIZE IN INCH 1-1/2 TRADE SIZE - FRACTIONAL
Qty:
Part #:STSSCN112
- SET SCREW TYPE STEEL MATERIAL IMC/RIGID/EMT CONDUIT USED ON UL 514B, CUL APPROVAL 10 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB1 INCLUDES (2) SET SCREW
$
2.02
Qty:
Part #:INTMFD30MC
- DECORATOR TYPE 1-1/4 INCH D SIZE IVORY COLOR WITHOUT HOLD OPERATION TYPE UL 917, CSA C22.2 APPROVAL AIR CONDITIONER, BATHROOM FAN, BROOM CLOSET, CARRIAGE LIGHT, ENGINE BLOCK HEATER, EXHAUST FAN, INDOOR/OUTDOOR LIGHTING, LIGHTING OVERRIDE, PORCH LIGHT, PROCESS CONTROL, PUMP, SELF STORAGE FACILITY, STEAM ROOM, TELEVISION SET, TENNIS COURT LIGHTING, VENTIL APPLICATION WALL MOUNTING -40 TO 120 DEG F OPERATING TEMPERATURE SPST SWITCH TYPE 20 AMPERE AT 125 VAC 50/60 HZ, 10 AMPERE AT 250/277 VAC 50/60 HZ (INDUCTIVE) 7 AMPERE AT 125 VAC 50/60 HZ (TUNGSTEN) CONTACT CURRENT RATING 1 HP AT 125 VAC 50/60 HZ, 2 HP AT 250 VAC 50/60 HZ CONTACT POWER RATING 30 MIN TIME CYCLE INTERMATIC[R] BRAND CAN BE USED IN SINGLE OR MULTI GANG INSTALLATION ENERGY SAVING TIMER FD MODEL
$
45.08
Qty:
Part #:INTMFD30MWC
- DECORATOR TYPE 1-3/4 INCH WIDTH X 1-1/4 INCH DEPTH X 4-1/8 INCH HEIGHT SIZE WHITE COLOR WITHOUT HOLD OPERATION TYPE UL, CSA (CANADA AND US) APPROVAL FAN, LIGHTING, MOTOR, HEATER APPLICATION WALL MOUNTING 32 TO 104 DEG F OPERATING TEMPERATURE SPST SWITCH TYPE 20 AMP AT 125 VOLT AC 50/60 HERTZ (RESISTIVE), 10 AMP AT 250/277 VOLT AC 50/60 HERTZ (RESISTIVE), 7 AMP AT 125 VOLT AC (TUNGSTEN) CONTACT CURRENT RATING 1 HP AT 125 VOLT AC 50/60 HERTZ, 2 HP AT 250 VOLT AC 50/60 HERTZ CONTACT POWER RATING 30 MINUTE TIME CYCLE INTERMATIC BRAND ROHS COMPLIANT VOLTAGE RATING 125 TO 277 VOLT AC AT 60 HERTZ USED ON DECORATOR AND TOGGLE TYPE SWITCH PLATE FD MODEL
$
45.28
Qty:
Part #:INTMFF60MC
- COMMERCIAL TYPE 1-3/4 INCH WIDTH X 1-1/4 INCH DEPTH X 4-1/8 INCH HEIGHT SIZE BRUSHED METAL PLATE, WHITE KNOB COLOR WITHOUT HOLD OPERATION TYPE UL, CSA (CANADA AND US) APPROVAL FAN, LIGHTING, MOTOR, HEATER APPLICATION WALL MOUNTING 32 TO 104 DEG F OPERATING TEMPERATURE SPST SWITCH TYPE 20 AMP AT 125 VOLT AC 50/60 HERTZ (RESISTIVE), 10 AMP AT 250/277 VOLT AC 50/60 HERTZ (RESISTIVE), 7 AMP AT 125 VOLT AC (TUNGSTEN) CONTACT CURRENT RATING 1 HP AT 125 VOLT AC 50/60 HERTZ, 2 HP AT 250 VOLT AC 50/60 HERTZ CONTACT POWER RATING 60 MINUTE TIME CYCLE INTERMATIC BRAND ROHS COMPLIANT VOLTAGE RATING 125 TO 277 VOLT AC AT 60 HERTZ FF MODEL
$
45.28
Qty:
Part #:INTMFF5M
- COMMERCIAL TYPE 1-3/4 INCH W X 1-1/4 INCH D X 4-1/8 INCH H SIZE BRUSHED METAL WALL PLATE, WHITE KNOB COLOR WITHOUT HOLD OPERATION TYPE UL (CANADA AND US), CSA (CANADA AND US) APPROVAL FAN, LIGHTING, MOTOR, HEATER APPLICATION WALL MOUNTING 32 TO 104 DEG F OPERATING TEMPERATURE SPST SWITCH TYPE 20 AMPERE AT 125 VAC 50/60 HZ, 10 AMPERE AT 250/277 VAC 50/60 HZ (RESISTIVE), 7 AMPERE AT 125 VAC 50/60 HZ (TUNGSTEN) CONTACT CURRENT RATING 1 HP AT 125 VAC 50/60 HZ, 2 HP AT 250 VAC 50/60 HZ CONTACT POWER RATING 5 MIN TIME CYCLE ROHS COMPLIANT FF MODEL
$
46.48
Qty:
Part #:INTMFD30MH
- DECORATOR TYPE 1-3/4 INCH W X 1-1/4 INCH D X 4-1/8 INCH H SIZE IVORY COLOR WITH HOLD OPERATION TYPE UL (CANADA AND US), CSA (CANADA AND US) APPROVAL FAN, LIGHTING, MOTOR, HEATER APPLICATION WALL MOUNTING 32 TO 104 DEG F OPERATING TEMPERATURE SPST SWITCH TYPE 20 AMPERE AT 125 VAC 50/60 HZ, 10 AMPERE AT 250/277 VAC 50/60 HZ (RESISTIVE), 7 AMPERE AT 125 VAC 50/60 HZ (TUNGSTEN) CONTACT CURRENT RATING 1 HP AT 125 VAC 50/60 HZ, 2 HP AT 250 VAC 50/60 HZ CONTACT POWER RATING 30 MIN TIME CYCLE ROHS COMPLIANT FD MODEL
$
45.08
Qty:
Part #:CUTTP432
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (8) 3/4 INCH SIDE KNOCKOUT SIZE 12 KNOCKOUT(S) (4) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
8.09
Qty:
Part #:CUTTP451
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (6) 1/2 INCH SIDE, (3) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (4) BOTTOM, (9) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.75
Qty:
Part #:FXCN112
- STRAIGHT TYPE DIE-CAST ZINC MATERIAL 2.09 INCH SQUEEZE INSTALLATION UL APPROVAL 50 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 1.68 TO 1.94 INCH CORD SIZE NON-INSULATED THROAT TYPE FLEX METAL CONDUIT SINGLE CABLE OPENING
$
6.15
Qty:
Part #:IGB112
- DIE-CAST ZINC, PLASTIC LINER MATERIAL RIGID CONDUIT USED ON 14 AWG SOLID TO 4 AWG STRANDED WIRE SIZE COPPER/ALUMINUM CONDUCTOR MATERIAL UL 467, UL 514B APPROVAL 125 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE INSULATED THROAT TYPE LAY-IN, ALUMINUM LUG TYPE ROHS COMPLIANT TEMPERATURE RATING 150 DEG C (LINER)
$
8.22
Qty:
Part #:KO112
- SNAP-IN TYPE STEEL MATERIAL 1-1/2 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 250
$
1.34
Qty:
Part #:CUTTP403
- WELDED STEEL MATERIAL 4 INCH 4 WIDTH IN INCH 4 INCH 4 HEIGHT IN INCH 2-1/8 INCH 2.125 DEPTH IN INCH UL 514-A, UL 514-B, UL 514-C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH CONDUIT BOTTOM, (2) (1/2 INCH - 3/4 INCH) CONDUIT ECCENTRIC KNOCKOUT BOTTOM, (8) 1/2 INCH CONDUIT SIDES, (4) (1/2 INCH - 3/4 INCH) CONDUIT ECCENTRIC KNOCKOUT SIDES KNOCKOUT SIZE 16 KNOCKOUT(S) (4) BOTTOM, (12) SIDE KNOCKOUT LOCATION COOPER CROUSE-HINDS. BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION #W-J-800E, NEMA OS-1 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN
$
2.43
Qty:
Part #:PB112
- POLYPROPYLENE MATERIAL IMC/RIGID CONDUIT USED ON UL 514C APPROVAL 105 DEG C TEMPERATURE RATING 250 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE NON-INSULATED THROAT TYPE ROHS COMPLIANT COLOR GRAY
$
0.44
Qty:
Part #:STCMCN112
- COMPRESSION TYPE STEEL MATERIAL EMT CONDUIT USED ON UL 514B APPROVAL 5 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
3.29
Qty:
Part #:CUTTP452
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (2) 1/2 INCH SIDE, (1) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 8 KNOCKOUT(S) (1) BOTTOM, (3) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
5.70
Qty:
Part #:CUTTP431MSB
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL MSB BRACKET MOUNTING 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (4) 1/2 INCH SIDE, (2) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 11 KNOCKOUT(S) (1) BOTTOM, (6) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION ARMORED/METAL CLAD CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
20.97
Qty:
Part #:CUTTP431
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (4) 1/2 INCH SIDE, (2) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 11 KNOCKOUT(S) (1) BOTTOM, (6) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION ARMORED/METAL CLAD CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
5.10
Qty:
Part #:CUTTP436
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (8) 1 INCH SIDE KNOCKOUT SIZE 12 KNOCKOUT(S) (4) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.04
Qty:
Part #:CUTTP440
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (2) 1/2 INCH SIDE, (1) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 8 KNOCKOUT(S) (1) BOTTOM, (3) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION ARMORED/METAL CLAD CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
5.72
Qty:
Part #:CUTTP443
- SQUARE BOX EXTENSION RING TYPE STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (8) 1/2 INCH SIDE, (4) 3/4 INCH SIDE KNOCKOUT SIZE 12 KNOCKOUT(S) APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
8.22
Qty:
Part #:CUTTP450
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (4) 1/2 INCH SIDE, (2) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 11 KNOCKOUT(S) (1) BOTTOM, (6) SIDE,(4) CABLE SIDE KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
8.03
Qty:
Part #:CUTTP434
- DRAWN TYPE STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL APPROVAL 25 PER PACK STANDARD PACKAGE 30.3 CUBIC INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (8) 1/2 INCH SIDES, (4) 3/4 INCH SIDES KNOCKOUT SIZE 17 KNOCKOUT(S) (5) BOTTOM, (12) SIDES KNOCKOUT LOCATION COOPER CROUSE-HINDS BRAND APPLICATION CONDUIT
$
7.45
Qty:
Part #:EMTEL112-22-1/2
- STEEL MATERIAL GALVANIZED FINISH UL 797, CSA APPROVAL ANSI C80.3, WW-C-563 APPLICABLE STANDARD 15 PER CASE STANDARD PACKAGE 1-1/2 INCH TRADE SIZE PLAIN END TYPE 22 DEGREE BEND ANGLE 8.25 INCH BEND RADIUS
$
10.45
Qty:
Displaying: 1 - 24 of 30 Matching Items