1-3/8 In
1/2 In, 3/4 in Conduit
View:
Active Filters :
Part #:STSSCN100
- SET SCREW TYPE STEEL MATERIAL IMC/RIGID/EMT CONDUIT USED ON UL 514B, CUL APPROVAL 100 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB1
$
0.69
Qty:
Part #:CRC02094
- WATER WHITE COLOR -40 TO 400 DEG F TEMPERATURE RATING CAN CONTAINER TYPE 10 OUNCE CONTAINER SIZE SILICONE BASE 0 DEG F FLASH POINT AEROSOL, LIQUID PHYSICAL FORM ROHS COMPLIANT UNIT PACKAGE 16 OUNCE FILM TYPE DRY, CLEAR, NON-HARDENING ODOR MILD SOLVENT BOILING POINT 118.4 DEG F PROPELLANT TYPE HYDROCARBON DIELECTRIC STRENGTH 350 MILLIVOLT SPECIFIC GRAVITY 0.6694 EVAPORATION RATE FAST VAPOR PRESSURE 1577.3 HECTOPASCAL VAPOR DENSITY GREATER THAN 1 (AIR EQUAL TO 1) VOC CONTENT 649.9 GPL OVERALL DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 7.75 INCH HEIGHT APPLICABLE STANDARD NSF H1
$
12.91
Qty:
Part #:CRC14077
- POLYURETHANE TYPE TAN COLOR UL APPLICABLE STANDARD FILLING, INSULATING, SEALING, BONDING, HVAC, ELECTRICAL, INDUSTRIAL, PLUMBING, AROUND ELECTRICAL OUTLET, UTILITY PANEL, DUCT, PIPE, DOOR, WINDOW, BASE PLATE, JOINT, CRACK, CRAWLSPACE, FOUNDATION, SPOT INSULATING, TOUCH-UP APPLICATION -200 TO 200 DEG F TEMPERATURE RATING AEROSOL CAN CONTAINER TYPE 16 OUNCE CONTAINER CAPACITY 12 TO 24 HOUR (CURE TIME) SETTING TIME ROHS COMPLIANT OVERALL DIMENSION 2.19 INCH WIDTH X 2.19 INCH DEPTH X 8.06 INCH HEIGHT SPECIFIC GRAVITY 1.2 VOC CONTENT 35 GRAM PER LITER NET FILL 12 OUNCE
$
16.54
Qty:
Part #:STCMCN100
- COMPRESSION TYPE STEEL MATERIAL EMT CONDUIT USED ON UL 514B APPROVAL 75 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
1.20
Qty:
Part #:BLINBG-8-12-U-2-4
- 360 DEGREE PIVOT TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL HAMMER-ON, PLIERS INSTALLATION UL (CANADA AND US) APPROVAL BOTTOM MOUNTING 100 PER BOX STANDARD PACKAGE 1/2 INCH, 3/4 INCH CONDUIT SIZE 75 POUND LOAD CAPACITY 1/8 TO 1/4 INCH BEAM/FLANGE SIZE COOPER B-LINE BRAND BG MODEL
$
1.31
Qty:
Part #:BLINBG-8-12-U-5-8
- 360 DEG PIVOT TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL HAMMER ON, PLIER INSTALLATION UL (CANADA AND US) APPROVAL BOTTOM MOUNTING 100 PER BOX STANDARD PACKAGE 1/2, 3/4 INCH CONDUIT SIZE 75 LB LOAD CAPACITY 5/16 TO 1/2 INCH BEAM/FLANGE SIZE GUIDE-RITE[TM] BRAND BG MODEL
$
1.46
Qty:
Part #:GREE645-1-3/8
- CARBIDE TIPPED BLADE MATERIAL 1-3/8 INCH DIAMETER 1.375 DIAMETER - DECIMAL 1-3/8 DIAMETER - FRACTIONAL KWIK CHANGE[T] BRAND CONDUIT HOLE DIAMETER 1 INCH MINIMUM CHUCK SIZE 3/8 INCH
$
37.00
Qty:
Displaying: 1 - 7 of 7 Matching Items