2-1/2 In
1-3/8 In
Qty:
Part #:CRC02094
- WATER WHITE COLOR -40 TO 400 DEG F TEMPERATURE RATING CAN CONTAINER TYPE 10 OUNCE CONTAINER SIZE SILICONE BASE 0 DEG F FLASH POINT AEROSOL, LIQUID PHYSICAL FORM ROHS COMPLIANT UNIT PACKAGE 16 OUNCE FILM TYPE DRY, CLEAR, NON-HARDENING ODOR MILD SOLVENT BOILING POINT 118.4 DEG F PROPELLANT TYPE HYDROCARBON DIELECTRIC STRENGTH 350 MILLIVOLT SPECIFIC GRAVITY 0.6694 EVAPORATION RATE FAST VAPOR PRESSURE 1577.3 HECTOPASCAL VAPOR DENSITY GREATER THAN 1 (AIR EQUAL TO 1) VOC CONTENT 649.9 GPL OVERALL DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 7.75 INCH HEIGHT APPLICABLE STANDARD NSF H1
$
12.91
Qty:
Part #:CRC14077
- POLYURETHANE TYPE TAN COLOR UL APPLICABLE STANDARD FILLING, INSULATING, SEALING, BONDING, HVAC, ELECTRICAL, INDUSTRIAL, PLUMBING, AROUND ELECTRICAL OUTLET, UTILITY PANEL, DUCT, PIPE, DOOR, WINDOW, BASE PLATE, JOINT, CRACK, CRAWLSPACE, FOUNDATION, SPOT INSULATING, TOUCH-UP APPLICATION -200 TO 200 DEG F TEMPERATURE RATING AEROSOL CAN CONTAINER TYPE 16 OUNCE CONTAINER CAPACITY 12 TO 24 HOUR (CURE TIME) SETTING TIME ROHS COMPLIANT OVERALL DIMENSION 2.19 INCH WIDTH X 2.19 INCH DEPTH X 8.06 INCH HEIGHT SPECIFIC GRAVITY 1.2 VOC CONTENT 35 GRAM PER LITER NET FILL 12 OUNCE
$
16.54
Qty:
$
3.78
Qty:
Part #:CB034
- DIE-CAST ZINC MATERIAL IMC/RIGID CONDUIT USED ON UL 514B APPROVAL 1000 STANDARD PACKAGE 3/4 INCH TRADE SIZE NON-INSULATED THROAT TYPE
$
1.06
Qty:
Part #:CB212
- DIE-CAST ZINC MATERIAL IMC/RIGID CONDUIT USED ON UL 514B APPROVAL 100 STANDARD PACKAGE 2-1/2 INCH TRADE SIZE NON-INSULATED THROAT TYPE
$
10.50
Qty:
Part #:EHCL212
- CLAMP-ON TYPE CAST ALUMINUM MATERIAL 10.5 INCH L X 7 INCH H SIZE RIGID/EMT CONDUIT USED ON UL APPROVAL 2-1/2 INCH TRADE SIZE 7 HOLE(S) ROHS COMPLIANT PACKAGING QUANTITY 1
$
68.11
Qty:
Part #:KO034P
- SNAP-IN TYPE NYLON 6/6 MATERIAL UL APPROVAL 3/4 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 500
$
0.78
Qty:
Part #:IGB034
- DIE-CAST ZINC, PLASTIC LINER MATERIAL RIGID CONDUIT USED ON 14 AWG SOLID TO 4 AWG STRANDED WIRE SIZE COPPER/ALUMINUM CONDUCTOR MATERIAL UL 467, UL 514B APPROVAL 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE INSULATED THROAT TYPE LAY-IN, ALUMINUM LUG TYPE ROHS COMPLIANT TEMPERATURE RATING 150 DEG C (LINER)
$
3.51
Qty:
Part #:IGB212
- DIE-CAST ZINC, PLASTIC LINER MATERIAL RIGID CONDUIT USED ON 14 AWG SOLID TO 4 AWG STRANDED WIRE SIZE COPPER/ALUMINUM CONDUCTOR MATERIAL UL 467, UL 514B APPROVAL 10 STANDARD PACKAGE 2-1/2 INCH TRADE SIZE INSULATED THROAT TYPE LAY-IN, ALUMINUM LUG TYPE ROHS COMPLIANT TEMPERATURE RATING 150 DEG C (LINER)
$
11.00
Qty:
Part #:STSSCN212
- SET SCREW TYPE STEEL MATERIAL IMC/RIGID/EMT CONDUIT USED ON UL 514B, CUL APPROVAL 8 STANDARD PACKAGE 2-1/2 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB1 INCLUDES (2) SET SCREW
$
7.84
Qty:
Part #:KO034
- SNAP-IN TYPE STEEL MATERIAL 3/4 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 500
$
0.37
Qty:
Part #:FXCN034
- STRAIGHT TYPE DIE-CAST ZINC MATERIAL 1.58 INCH SQUEEZE INSTALLATION UL APPROVAL 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE 0.88 TO 1.11 INCH CORD SIZE NON-INSULATED THROAT TYPE FLEX METAL CONDUIT SINGLE CABLE OPENING
$
1.14
Qty:
Part #:FXCN212
- STRAIGHT TYPE DIE-CAST ZINC MATERIAL 2.84 INCH SQUEEZE INSTALLATION UL APPROVAL 5 STANDARD PACKAGE 2-1/2 INCH TRADE SIZE 2.88 TO 3.25 INCH CORD SIZE NON-INSULATED THROAT TYPE FLEX METAL CONDUIT SINGLE CABLE OPENING
$
38.84
Qty:
Part #:STCMCN212
- COMPRESSION TYPE STEEL MATERIAL EMT CONDUIT USED ON UL 514B APPROVAL 8 STANDARD PACKAGE 2-1/2 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
13.63
Qty:
Part #:PB034
- POLYPROPYLENE MATERIAL IMC/RIGID CONDUIT USED ON UL 514C APPROVAL 105 DEG C TEMPERATURE RATING 1000 STANDARD PACKAGE 3/4 INCH TRADE SIZE NON-INSULATED THROAT TYPE ROHS COMPLIANT COLOR GRAY
$
0.16
Qty:
Part #:PB212
- POLYPROPYLENE MATERIAL IMC/RIGID CONDUIT USED ON UL 514C APPROVAL 105 DEG C TEMPERATURE RATING 50 STANDARD PACKAGE 2-1/2 INCH TRADE SIZE NON-INSULATED THROAT TYPE ROHS COMPLIANT COLOR GRAY
$
1.26
Qty:
Part #:PULLELERER034G
- DIE-CAST ZINC, NEOPRENE GASKET MATERIAL IMC/RIGID CONDUIT USED ON THREADED MALE/FEMALE INSTALLATION UL 514B APPROVAL 50 STANDARD PACKAGE 3/4 INCH TRADE SIZE 90 DEGREE BEND ANGLE
$
9.42
Qty:
Part #:PLG034
- THREADED TYPE STEEL MATERIAL ELECTROGALVANIZED CHROMATE TREATED FINISH THREADED CONDUIT HUB USED ON UL 1203, CSA C22.2 APPROVAL CLASS I DIV 1 AND 2 GROUP A B, CLASS II DIV 1 GROUP E F G, CLASS II DIV 2 GROUP F G, CLASS III ENCLOSURE 3/4 INCH TRADE SIZE RECESSED HEAD STYLE CONSTRUCTIONAL FEATURE EXPLOSIONPROOF, DUST IGNITIONPROOF APPLICATION HAZARDOUS LOCATION APPLICABLE STANDARD NEC/CEC PLG MODEL
$
0.70
Qty:
$
8.87
Qty:
Displaying: 1 - 24 of 33 Matching Items