2 in Width X 3-1/2 in Depth X 3 in Height
1 In
View:
Active Filters :
Part #:CRC02094
- WATER WHITE COLOR -40 TO 400 DEG F TEMPERATURE RATING CAN CONTAINER TYPE 10 OUNCE CONTAINER SIZE SILICONE BASE 0 DEG F FLASH POINT AEROSOL, LIQUID PHYSICAL FORM ROHS COMPLIANT UNIT PACKAGE 16 OUNCE FILM TYPE DRY, CLEAR, NON-HARDENING ODOR MILD SOLVENT BOILING POINT 118.4 DEG F PROPELLANT TYPE HYDROCARBON DIELECTRIC STRENGTH 350 MILLIVOLT SPECIFIC GRAVITY 0.6694 EVAPORATION RATE FAST VAPOR PRESSURE 1577.3 HECTOPASCAL VAPOR DENSITY GREATER THAN 1 (AIR EQUAL TO 1) VOC CONTENT 649.9 GPL OVERALL DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 7.75 INCH HEIGHT APPLICABLE STANDARD NSF H1
$
12.91
Qty:
Part #:CRC14077
- POLYURETHANE TYPE TAN COLOR UL APPLICABLE STANDARD FILLING, INSULATING, SEALING, BONDING, HVAC, ELECTRICAL, INDUSTRIAL, PLUMBING, AROUND ELECTRICAL OUTLET, UTILITY PANEL, DUCT, PIPE, DOOR, WINDOW, BASE PLATE, JOINT, CRACK, CRAWLSPACE, FOUNDATION, SPOT INSULATING, TOUCH-UP APPLICATION -200 TO 200 DEG F TEMPERATURE RATING AEROSOL CAN CONTAINER TYPE 16 OUNCE CONTAINER CAPACITY 12 TO 24 HOUR (CURE TIME) SETTING TIME ROHS COMPLIANT OVERALL DIMENSION 2.19 INCH WIDTH X 2.19 INCH DEPTH X 8.06 INCH HEIGHT SPECIFIC GRAVITY 1.2 VOC CONTENT 35 GRAM PER LITER NET FILL 12 OUNCE
$
16.54
Qty:
Part #:SERCN100
- DIE-CAST ZINC MATERIAL (2) SCREW INSTALLATION ROMEX/NON-METALLIC CABLE CABLE TYPE (3) 8 TO 4 AWG (OVAL/ROUND CABLE), 12/3 TO 8/3 AWG (NON-METALLIC CABLE) CABLE SIZE UL APPROVAL 250 STANDARD PACKAGE 1 INCH TRADE SIZE NON-INSULATED, ROUND/OVAL SHAPE THROAT TYPE
$
3.26
Qty:
Part #:KO100
- SNAP-IN TYPE STEEL MATERIAL 1 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 500
$
0.68
Qty:
$
2.30
Qty:
Part #:CB100
- DIE CAST ZINC MATERIAL RIGID CONDUIT USED ON UL APPROVAL 500 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE CB MODEL
$
5.47
Qty:
Part #:CUTTP423
- WELDED STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 22 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH, 3/4 INCH) ECCENTRIC BOTTOM, (6) 1/2 INCH SIDE, (3) (1/2 INCH, 3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (4) BOTTOM, (9) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FED SPEC W-J-800E, NEMA OS-1
$
3.05
Qty:
Part #:KO100P
- SNAP-IN TYPE NYLON 6/6 MATERIAL UL APPROVAL 1 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 500
$
1.30
Qty:
Part #:IGB100
- DIE-CAST ZINC, PLASTIC LINER MATERIAL RIGID CONDUIT USED ON 14 AWG SOLID TO 4 AWG STRANDED WIRE SIZE COPPER/ALUMINUM CONDUCTOR MATERIAL UL 467, UL 514B APPROVAL 250 STANDARD PACKAGE 1 INCH TRADE SIZE INSULATED THROAT TYPE LAY-IN, ALUMINUM LUG TYPE ROHS COMPLIANT TEMPERATURE RATING 150 DEG C (LINER)
$
3.91
Qty:
Part #:2B
- CONDUIT HANGER WITH BOLT TYPE 18 GAUGE STEEL MATERIAL BRIGHT ZINC ELECTROPLATED FINISH UL (CANADA AND US) APPROVAL 100 STANDARD PACKAGE 2 INCH TRADE SIZE 1/4 INCH MOUNTING HOLE SIZE 1 INCH RIGID/EMT CONDUIT TYPE SCREW SIZE 1/4 INCH X 1 INCH
$
0.71
Qty:
Part #:PB100
- POLYPROPYLENE MATERIAL IMC/RIGID CONDUIT USED ON UL 514C APPROVAL 105 DEG C TEMPERATURE RATING 250 STANDARD PACKAGE 1 INCH TRADE SIZE NON-INSULATED THROAT TYPE ROHS COMPLIANT COLOR GRAY
$
0.25
Qty:
Part #:CUTTP469
- WELDED STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 22 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (6) 3/4 INCH SIDE KNOCKOUT SIZE 11 KNOCKOUT(S) (5) BOTTOM, (6) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
5.12
Qty:
Part #:CUTTP404
- WELDED STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL 514A/514B/514C APPROVAL 50 STANDARD PACKAGE 22 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (8) 1/2 INCH SIDE, (4) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 16 KNOCKOUT(S) (4) BOTTOM, (12) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
2.00
Qty:
Part #:CUTTP410
- DRAWN TYPE STEEL MATERIAL 4 INCH 1.5 INCH 4 INCH UL APPROVAL 50 STANDARD PACKAGE 22 CUBIC INCH CAPACITY (5) 1/2 INCH BOTTOM, (12) 1/2 INCH SIDE KNOCKOUT SIZE 17 KNOCKOUT(S) (5) BOTTOM, (12) SIDE KNOCKOUT LOCATION APPLICATION CONDUIT
$
2.09
Qty:
Part #:CUTTP414
- DRAWN TYPE STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL APPROVAL 50 PER PACK STANDARD PACKAGE 22 CUBIC INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (8) 1/2 INCH SIDES, (4) 3/4 INCH SIDES KNOCKOUT SIZE 17 KNOCKOUT(S) (5) BOTTOM, (12) SIDES KNOCKOUT LOCATION COOPER CROUSE-HINDS BRAND APPLICATION CONDUIT
$
4.25
Qty:
Part #:CUTTP412
- DRAWN TYPE STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL APPROVAL 50 PER PACK STANDARD PACKAGE 21 CUBIC INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (8) 3/4 INCH SIDES KNOCKOUT SIZE 13 KNOCKOUT(S) (5) BOTTOM, (8) SIDES KNOCKOUT LOCATION COOPER CROUSE-HINDS BRAND APPLICATION CONDUIT
$
2.57
Qty:
Part #:CUTTP246
- GANGABLE TYPE STEEL MATERIAL 2 INCH 3 INCH 3-1/2 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL 7/8 INCH SETBACK S BRACKET MOUNTING 25 STANDARD PACKAGE 18 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) 1/2 INCH SIDE, (4) CABLE END, (2) 1/2 INCH END KNOCKOUT SIZE 11 KNOCKOUT(S) (1) BOTTOM, (4) SIDE, (2) END, (4) CABLE END KNOCKOUT LOCATION ARMORED/METAL CLAD CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
6.20
Qty:
Part #:CUTDS100H1
- THREADED HUB TYPE NEMA 3R USED ON 1 INCH HUB SIZE 1 HUB(S) SWITCH RATING DOUBLE THROW THROUGH 100 AMPERE
Qty:
Part #:CUTTP238
- GANGABLE TYPE STEEL MATERIAL 2 INCH 3 INCH 3-1/2 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL EAR MOUNTING 25 STANDARD PACKAGE 18 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) 1/2 INCH SIDE, (4) CABLE END, (2) 1/2 INCH END KNOCKOUT SIZE 11 KNOCKOUT(S) (1) BOTTOM, (4) SIDE, (2) END, (4) CABLE END KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
5.72
Qty:
Part #:CUTTP240
- GANGABLE TYPE STEEL MATERIAL 2 INCH 3 INCH 3-1/2 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL 1/2 INCH SETBACK F BRACKET MOUNTING 25 STANDARD PACKAGE 18 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) 1/2 INCH SIDE, (4) CABLE END, (2) 1/2 INCH END KNOCKOUT SIZE 11 KNOCKOUT(S) (1) BOTTOM, (4) SIDE, (2) END, (4) CABLE END KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
13.19
Qty:
Part #:CUTTP242
- GANGABLE TYPE STEEL MATERIAL 2 INCH 3 INCH 3-1/2 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL 7/8 INCH SETBACK S BRACKET MOUNTING 25 STANDARD PACKAGE 18 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) 1/2 INCH SIDE, (4) CABLE END, (2) 1/2 INCH END KNOCKOUT SIZE 11 KNOCKOUT(S) (1) BOTTOM, (4) SIDE, (2) END, (4) CABLE END KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
4.69
Qty:
Part #:CUTTP244
- GANGABLE TYPE STEEL MATERIAL 2 INCH 3 INCH 3-1/2 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL EAR MOUNTING 25 STANDARD PACKAGE 18 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) 1/2 INCH SIDE, (4) CABLE END, (2) 1/2 INCH END KNOCKOUT SIZE 11 KNOCKOUT(S) (1) BOTTOM, (4) SIDE, (2) END, (4) CABLE END KNOCKOUT LOCATION ARMORED/METAL CLAD CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
4.13
Qty:
Part #:CUTTP252
- GANGABLE TYPE STEEL MATERIAL 2 INCH 3 INCH 3-1/2 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL EAR MOUNTING 25 STANDARD PACKAGE 18 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) 1/2 INCH SIDE, (4) 1/2 INCH END KNOCKOUT SIZE 9 KNOCKOUT(S) (1) BOTTOM, (4) SIDE, (4) END KNOCKOUT LOCATION NO CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.76
Qty:
Displaying: 1 - 24 of 27 Matching Items