Cwsc Nk Series
1414 Ph Series
View:
Active Filters :
- Sub Brand: 1414 Ph Series Cwsc Nk Series M18 tradesman pro™
Part #:KLE60364
BE PERPARED FOR HARSH WINTER CONDITIONS!
-
High-Visibility Winter Bomber Jacket, L
60364
Jacket is made with 220-Gram insulation for superior warmth
Water and wind resistant PU coated outer shell
ANSI rated Type R, Class 3 with 2-Inch reflective stripes
Zippered underarm vents with mesh allows for air circulation
Attached hood with drawstring and stoppers can be rolled into collar and can be worn with hard hats and layers
Cuffs feature hook and loop adjustable closures for the perfect fit
Storm flap with snaps protects zippered front
10 internal and external pockets plus dual mic tabs
Dark fabric panel on lower front and inside sleeve hides dirt
Machine washable
$
74.99
Qty:
Part #:KLE60380
BE PERPARED FOR HARSH WINTER CONDITIONS!
-
High-Visibility Winter Bomber Jacket, XL
60380
Jacket is made with 220-Gram insulation for superior warmth
Water and wind resistant PU coated outer shell
ANSI rated Type R, Class 3 with 2-Inch reflective stripes
Zippered underarm vents with mesh allows for air circulation
Attached hood with drawstring and stoppers can be rolled into collar and can be worn with hard hats and layers
Cuffs feature hook and loop adjustable closures for the perfect fit
Storm flap with snaps protects zippered front
10 internal and external pockets plus dual mic tabs
Dark fabric panel on lower front and inside sleeve hides dirt
Machine washable
$
74.99
Qty:
Part #:KLE60381
BE PERPARED FOR HARSH WINTER CONDITIONS!
-
Merino Wool Thermal Socks, L
60381
Thermal Socks are Made in USA with Merino Wool for temperature regulation, moisture wicking and odor reduction
Mid-length socks have a seamless toe closure for reduced bulk and less friction
Fully reinforced sole for extra durability
Cushioned foot bed for sock absorption, flexibility and all day comfort
Contoured rib top to hold sock in place
Arch support for tension relief
Machine washable
$
14.99
Qty:
Part #:KLE60383
BE PERPARED FOR HARSH WINTER CONDITIONS!
-
Winter Helmet Liner
60383
Winter helmet Liner is made of soft polar fleece and windproof fabric
Retain warmth with polar fleece fabric on crown of liner
Protect ears with 360-Degree of windproof fabric around liner
Stretchable and soft fabric for secure fit
Wear comfortably under hard hats or alone
Reflective logo
One size fits most
$
9.99
Qty:
Part #:KLE60388
BE PERPARED FOR HARSH WINTER CONDITIONS!
-
Heavy Knit Hat
60388
Knit hat is made from heavy knit to provide extra warmth in cold weather
Limited edition vintage Klein Tools logo prominent on front of hat
Durable construction with smooth seams and snag resistant
Wide cuff keeps ears extra warm and blocks wind
Snug fit for warmth and comfort in cold elements
Made of 98% Polyester, 2% Spandex
One size fits most
$
19.99
Qty:
Part #:KLE60389
BE PERPARED FOR HARSH WINTER CONDITIONS!
-
Thermal Dipped Gloves, L
60389
Gloves are double dipped and terry lined for protection and warmth in cold weather
Coated with latex shell for water resistance
Second coating of textured latex on palm and fingers for superior grip
Thick lining of 7-Gram brushed acrylic to retain warmth
Tear and abrasion resistant while still maintaining flexibility for great dexterity
Ribbed-knit cuff for secure fit
Meets standards EN388-2016 2131X and EN5112006 X1X
Machine washable
$
12.99
Qty:
Part #:KLE60390
BE PERPARED FOR HARSH WINTER CONDITIONS!
-
Thermal Dipped Gloves, Extra-Large
60390
Gloves are double dipped and terry lined for protection and warmth in cold weather
Coated with latex shell for water resistance
Second coating of textured latex on palm and fingers for superior grip
Thick lining of 7-Gram brushed acrylic to retain warmth
Tear and abrasion resistant while still maintaining flexibility for great dexterity
Ribbed-knit cuff for secure fit
Meets standards EN388-2016 2131X and EN5112006 X1X
Machine washable
$
12.99
Qty:
Part #:KLE60413
BE PERPARED FOR HARSH WINTER CONDITIONS!
-
Heat Exchanger Balaclava
60413
Balaclava is made with high-performance 320g fleece for cold weather
The technology of the heat exchanger captures heat from each exhaled breath and brings the heat back to the body&rsquos core, helping to prevent loss of body heat
Heat exchanger is removable for versatility and adjusts with hook and loop attachment for a form-fit
Designed to be worn with safety goggles
Built-in aluminum nose piece allows for snug fit every time
Controls moisture to keep skin dry
One size fits most
Machine washable
$
39.99
Qty:
Part #:KLE60132 - SEASONAL ITEM ONLY
BE PERPARED FOR HARSH WINTER CONDITIONS!
-
Wind Proof Hinged Balaclava
60132
Balaclava is a stretchable one-piece fleece for ultimate warmth
Extra layer of wind-protectant fabric on mouth and neck panel
Designed with hinged top and can be used as a neck gaiter
Long length to keep your neck warm
3-panel construction for comfort
Flat lock seams won&rsquot irritate skin
One size fits most
Machine washable
Qty:
Part #:KLE60382
BE PERPARED FOR HARSH WINTER CONDITIONS!
-
Merino Wool Thermal Socks, XL
60382
Thermal Socks are Made in USA with Merino Wool for temperature regulation, moisture wicking and odor reduction
Mid-length socks have a seamless toe closure for reduced bulk and less friction
Fully reinforced sole for extra durability
Cushioned foot bed for sock absorption, flexibility and all day comfort
Contoured rib top to hold sock in place
Arch support for tension relief
Machine washable
$
14.16
Qty:
Part #:MILW2850-22CT
- The M18 compact brushless 1/4 in. hex impact driver is the industry's fastest 18 V compact impact solution. REDLINK electronics and REDLITHIUM batteries deliver 3,200 RPMs for best in class application speed. Brushless motor technology provides 1,600 in-lbs. Of torque, more run time, and a more compact tool at 5.1 in., which means less trips to the charger and greater access in tight spaces. 06977
$
205.89
Qty:
Part #:MILW2630-20
- Milwaukee Electric Tool Corporation introduces the new M18 Cordless LITHIUM-ION 6" Circular Saw that is designed to provide powerful lightweight cutting for a variety of applications including plumbing, electrical, framing, finishing and carpentry. The 2630 is a high performance circular saw that delivers the most durability in a cordless saw. Its powerful 3,500 RPM motor easily and quickly cuts tough material such as LVL headers. Magnesium upper and lower guards provide best-in-class durability to protect the blade from drops. The soft-grip handle is ergonomically designed to provide superior comfort and balance for easily controlled cuts. An easy-to-read aircraft aluminum shoe provides a light weight durable shoe and greater accuracy in rip cuts. Bullets Heavy-Duty Magnesium Guards for maximum durability Ergonomic, compact and lightweight design with soft-grip handle for operator comfort Electronic brake stops blade quickly Aircraft aluminum shoe provides greater accuracy 55965
$
124.36
Qty:
Part #:MILW2615-21
- The most compact 18-volt right angle drill driver on the market. With a total profile length of just 3-3/4, the M18 Cordless Lithium-Ion Right Angle Drill is a compact, powerful solution for drilling and driving in tight spaces. It features the industrys first electronic clutch, with 12 torque settings and an LED indicator for fastening with complete control. It comes with the REDLITHIUM XC Extended Battery Pack and M18 and M12 multi-voltage charger, delivering more work per charge and more work over pack life than the competitors, even in extreme conditions. The onboard fuel gauge helps you monitor the charge precisely, so theres less downtime on the job, and a built-in LED Light illuminates the work surface. An extended multi-position paddle switch gives you ultimate comfort and convenience during prolonged use. Bullets REDLITHIUM Battery Technology Superior pack construction, electronics, and performance deliver more work per charge and more work over pack life than any battery on the market REDLINK Intelligence Provides optimized performance and overload protection using total system communication between tool, battery and charger Innovative Electronic Clutch Delivers up to 150 in-lbs of torque with 11 settings plus drill mode for complete control in fastening applications 3/8-inch Single Sleeve Ratcheting Chuck Allows quick and easy bit changes and maximum grip Built-in LEDs Illuminate work surface and indicate clutch position 42214
$
257.95
Qty:
Part #:MILW2696-24
- The (2696-24) M18 cordless lithium-ion 4-tool combo kit includes the 1/2 In. hammer drill / driver (2602-20), SAWZALL Reciprocating Saw (2621-20), 1/4 In. hex impact driver (2650-20), and work light (49-24-0171). The M18 cordless lithium-ion system's patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by Red Lithium the M18 cordless system delivers more torque, more power, and longer run-time than the competition. Bullets M18 cordless 1/2 In. hammer drill / driver with Milwaukee 4-pole frameless motor delivers 550 in-lbs of peak torque, 0-450/0 to 1,700 RPM, & 29,000 bpm M18 SAWZALL Reciprocating Saw with patented gear-protecting clutch and counter balance mechanism M18 1/4 In. hex impact with the Milwaukee 4-pole frameless motor delivers 1400 in-lbs of torque M18 work light provides a fold-away hook for hands free use and a 135-degree rotating head to direct light at the work area DPM - digital power management overload protection prevents damage to the tool and battery in abusive situations Compatibility works with M18 XC high capacity lithium-ion batteries and M18 compact lithium-ion batteries 53166
$
555.68
Qty:
Part #:MILW49-16-2780
- The Milwaukee 750 MCM Cu/AL jaw produces the fastest installation-ready cuts. The superior blade geometry effortlessly cuts through 750 MCM Cu and 1000 MCM AL in under 3 seconds. The anti-spreading open jaws deliver the most compact 750 MCM Cu cutting solution which allows you to cut effortless in the tightest panels without looping. Use with the 2679-22, M18 Force Logic 600 MCM crimper. 05517
$
520.46
Qty:
Part #:MILW2724-20
- The M18 FUEL blower has the power to clear from 15 ft, gets to full throttle in under 1 second, and is up to 4 lbs lighter than competitors. Designed to meet landscape maintenance professional needs, the POWERSTATE brushless motor and REDLITHIUM HIGH DEMAND 9.0 battery (sold separately) deliver 450 CFM and 120 mph output. The blower features a variable speed trigger and high/low speed settings for increased control. The high setting is for the most demanding applications and low is optimized for clearing debris from flower beds without moving mulch. The lock on button allows the blower to be locked on to full throttle, so the operating hand can be relaxed reducing fatigue. The M18 FUEL blower is fully compatible with 150+ solutions on the M18 system. 05999
$
172.22
Qty:
Part #:MILW2648-20
- The M18 5 in. random orbit sander delivers corded power with 12,000 max OPM output. The 7,000-12,000 variable speed dial allows the user more control over the output of the tool to match the orbit speed for the application. The tools powerful motor allows the user to remove more material per battery charge. The M18 random orbit sander powered by REDLITHIUM battery technology delivers up to 35 minutes of run-time on a M18 3.0 Ah battery pack. 20961
Qty:
Part #:MILW2893-22
- The 2893 - 22 M18 2-tool Combo kit includes the 1/2 in. brushless hammer drill driver (2902-20) and the 1/4 in. hex compact brushless 3-speed impact driver (2851-20). The M18 cordless system's patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. The M18 1/2 in. brushless hammer drill/driver is the most powerful drill in its class at 725 in-lbs of torque. The M18 1/4 in. hex compact brushless impact driver has the fastest application speed its class and delivers 1,600 in-lbs of torque. The 2851 also includes 3-mode drive control allowing unmatched control. Both tools feature Milwaukee built brushless motors, REDLINK electronics, and REDLITHIUM batteries that provide more efficient power delivery, for fewer trips to the charger. 27892
$
340.60
Qty:
Part #:MILW48-11-1865
- The M18 REDLITHIUM HIGH OUTPUT XC6.0 battery pack provides 50 percent more power and runs 50 percent cooler vs M18 REDLITHIUM XC battery packs. The optimized combination of size and increased power provides a great solution for the entire range of M18 products. It delivers fade free power and runs substantially cooler through heavy applications, allowing tradesmen to push their cordless tools harder and longer than ever before. The M18 REDLITHIUM HIGH OUTPUT XC6.0 provides increased power in extreme cold weather conditions (below 0F / -18C) and delivers more work per charge, driving corded replacement on the jobsite. The REDLITHIUM HIGH OUTPUT XC6.0 battery is fully compatible with 150+ M18 solutions. 33381
$
175.20
Qty:
Part #:HAMCWSC424NK
- LAY-IN TYPE 16/14 GAUGE STEEL MATERIAL ANSI 61 GRAY FINISH 24 INCH 4 INCH 4 INCH UL 50, CUL APPROVAL NEMA 1, IP20 ENCLOSURE SCREW COVER TYPE NO KNOCKOUT(S) APPLICATION CONSTRUCTION DESIGNED TO ENSURE ELECTRICAL CONTINUITY AND TO PERMIT FAST AND EASY INDOOR INSTALLATION OF MULTIPLE WIREWAY RUNS APPLICABLE STANDARD IEC 60529 CW MODEL
$
23.92
Qty:
Part #:HAMCWSC624NK
- LAY-IN TYPE 16/14 GAUGE STEEL MATERIAL ANSI 61 GRAY FINISH 24 INCH 6 INCH 6 INCH UL 50, CUL APPROVAL NEMA 1, IP20 ENCLOSURE SCREW COVER TYPE NO KNOCKOUT(S) APPLICATION CONSTRUCTION DESIGNED TO ENSURE ELECTRICAL CONTINUITY AND TO PERMIT FAST AND EASY INDOOR INSTALLATION OF MULTIPLE WIREWAY RUNS APPLICABLE STANDARD IEC 60529 CW MODEL
$
48.19
Qty:
Part #:HAMCWSC636NK
- LAY-IN TYPE 16/14 GAUGE STEEL MATERIAL ANSI 61 GRAY FINISH 36 INCH 6 INCH 6 INCH UL 50, CUL APPROVAL NEMA 1, IP20 ENCLOSURE SCREW COVER TYPE NO KNOCKOUT(S) APPLICATION CONSTRUCTION DESIGNED TO ENSURE ELECTRICAL CONTINUITY AND TO PERMIT FAST AND EASY INDOOR INSTALLATION OF MULTIPLE WIREWAY RUNS APPLICABLE STANDARD IEC 60529 CW MODEL
$
53.01
Qty:
Part #:HAMCWSC648NK
- LAY-IN TYPE 16/14 GAUGE STEEL MATERIAL ANSI 61 GRAY FINISH 48 INCH 6 INCH 6 INCH UL 50, CUL APPROVAL NEMA 1, IP20 ENCLOSURE SCREW COVER TYPE NO KNOCKOUT(S) APPLICATION CONSTRUCTION DESIGNED TO ENSURE ELECTRICAL CONTINUITY AND TO PERMIT FAST AND EASY INDOOR INSTALLATION OF MULTIPLE WIREWAY RUNS APPLICABLE STANDARD IEC 60529 CW MODEL
$
71.50
Qty:
Part #:HAMCWSC660NK
- LAY-IN TYPE 16/14 GAUGE STEEL MATERIAL ANSI 61 GRAY FINISH 60 INCH 6 INCH 6 INCH UL 50, CUL APPROVAL NEMA 1, IP20 ENCLOSURE SCREW COVER TYPE NO KNOCKOUT(S) APPLICATION CONSTRUCTION DESIGNED TO ENSURE ELECTRICAL CONTINUITY AND TO PERMIT FAST AND EASY INDOOR INSTALLATION OF MULTIPLE WIREWAY RUNS APPLICABLE STANDARD IEC 60529 CW MODEL
$
84.85
Qty:
Displaying: 1 - 24 of 31 Matching Items