Bright Zinc Electroplated Steel (1/2"-1") or Galvanized Steel (1-1/4"-4")
16 Gauge Galvanized Steel
View:
Part #:10106SCNKOGALVN1
- UNFLANGED TYPE STEEL MATERIAL GALVANIZED, ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 6 INCH UL 50, CSA C22.2, IEC 529 APPROVAL WALL MOUNT MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON COVER TYPE 16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE APPLICATION WIRING BOXES, JUNCTION AND PULL BOXES
$
20.47
Qty:
Part #:12128SCWKOGALVN1
- STEEL MATERIAL ACRYLIC ELECTROCOATED OVER GALVANIZED SURFACE FINISH ANSI 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 12 INCH 12 HEIGHT IN INCH 8 INCH 304.8 HEIGHT IN MM UL 50, CSA 22.2 APPROVAL WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON COVER TYPE 16 GAUGE MATERIAL SPECIFICATION (2) (1/2 INCH - 3/4 INCH) CONDUIT CONCENTRIC KNOCKOUT TOP, (2) (3/4 INCH - 1 INCH) CONDUIT CONCENTRIC KNOCKOUT TOP, (1) (1 INCH - 1 1/4 INCH) CONDUIT CONCENTRIC KNOCKOUT TOP, (2) (1/2 INCH - 3/4 INCH) CONDUIT CONCENTRIC KNOCKOUT BOTTOM, (2) (3/4 INCH - 1 KNOCKOUT SIZE 20 KNOCKOUT(S) (5) TOP, (5) BOTTOM, (10) SIDES KNOCKOUT LOCATION B-LINE. BRAND APPLICABLE STANDARD IEC 529 PANEL NONE HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN
$
53.93
Qty:
Part #:EMTEL300-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 1 STANDARD PACKAGE 3 INCH TRADE SIZE PLAIN END TYPE 45 DEGREE BEND ANGLE 13 INCH BEND RADIUS LENGTH 3-1/8 INCH (STRAIGHT) OFFSET SIZE 14-1/2 INCH
$
182.80
Qty:
Part #:G2H034
- 2-HOLE, SNAP-ON, RIBBED TYPE 20 GAUGE ZINC ELECTROPLATED COLD ROLLED STEEL MATERIAL 0.688 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE 0.188 INCH HOLE/BOLT SIZE
$
0.19
Qty:
Part #:G2H012
- 2-HOLE, SNAP-ON, RIBBED TYPE 20 GAUGE ZINC ELECTROPLATED COLD ROLLED STEEL MATERIAL 0.625 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 500 STANDARD PACKAGE 1/2 INCH TRADE SIZE 0.188 INCH HOLE/BOLT SIZE
$
0.11
Qty:
Part #:G2H100
- 2-HOLE, SNAP-ON, RIBBED TYPE 18 GAUGE ZINC ELECTROPLATED COLD ROLLED STEEL MATERIAL 0.75 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 125 STANDARD PACKAGE 1 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.36
Qty:
Part #:G2H114
- 2-HOLE, SNAP-ON, RIBBED TYPE 18 GAUGE GALVANIZED STEEL MATERIAL 0.875 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.46
Qty:
Part #:G2H112
- 2-HOLE, SNAP-ON, RIBBED TYPE 16 GAUGE GALVANIZED STEEL MATERIAL 0.875 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.55
Qty:
Part #:G2H200
- 2-HOLE, SNAP-ON, RIBBED TYPE 16 GAUGE GALVANIZED STEEL MATERIAL 1 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 2 INCH TRADE SIZE 0.375 INCH HOLE/BOLT SIZE
$
0.77
Qty:
Part #:G2H212
- 2-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE GALVANIZED STEEL MATERIAL 1 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 2-1/2 INCH TRADE SIZE 0.375 INCH HOLE/BOLT SIZE
$
0.88
Qty:
Part #:G2H300
- 2-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE GALVANIZED STEEL MATERIAL 1 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 3 INCH TRADE SIZE 0.375 INCH HOLE/BOLT SIZE
$
1.43
Qty:
Part #:G2H400
- 2-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE GALVANIZED STEEL MATERIAL 1 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 20 STANDARD PACKAGE 4 INCH TRADE SIZE 0.437 INCH HOLE/BOLT SIZE
$
1.94
Qty:
Part #:E2H034
- 2-HOLE, SNAP-ON, RIBBED TYPE 20 GAUGE ZINC ELECTROPLATED COLD ROLLED STEEL MATERIAL 0.625 INCH EMT CONDUIT USED ON UL (CANADA AND US) APPROVAL 500 STANDARD PACKAGE 3/4 INCH TRADE SIZE 0.188 INCH HOLE/BOLT SIZE
$
0.15
Qty:
Part #:E2H100
- 2-HOLE, SNAP-ON, RIBBED TYPE 20 GAUGE ZINC ELECTROPLATED COLD ROLLED STEEL MATERIAL 0.688 INCH EMT CONDUIT USED ON UL (CANADA AND US) APPROVAL 250 STANDARD PACKAGE 1 INCH TRADE SIZE 0.188 INCH HOLE/BOLT SIZE
$
0.25
Qty:
Part #:E2H114
- 2-HOLE, SNAP-ON, RIBBED TYPE 18 GAUGE GALVANIZED STEEL MATERIAL 0.75 INCH EMT CONDUIT USED ON UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.72
Qty:
Part #:E2H200
- 2-HOLE, SNAP-ON, RIBBED TYPE 20 GAUGE ZINC ELECTROPLATED COLD ROLLED STEEL MATERIAL 0.56 INCH EMT CONDUIT USED ON UL (CANADA AND US) APPROVAL 500 STANDARD PACKAGE 1/2 INCH TRADE SIZE 0.188 INCH HOLE/BOLT SIZE
$
0.66
Qty:
Part #:EMTEL012-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 1/2 INCH TRADE SIZE PLAIN END TYPE 45 DEGREE BEND ANGLE 4 INCH BEND RADIUS LENGTH 1-1/2 INCH (STRAIGHT) OFFSET SIZE 5-3/8 INCH
$
5.40
Qty:
Part #:E2H112
- 2-HOLE, SNAP-ON, RIBBED TYPE 18 GAUGE GALVANIZED STEEL MATERIAL 0.875 INCH EMT CONDUIT USED ON UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.45
Qty:
Part #:EMTEL400-22-1/2
- STEEL MATERIAL GALVANIZED FINISH UL (CANADA AND US) APPROVAL 1 STANDARD PACKAGE 4 INCH TRADE SIZE PLAIN END TYPE 22.5 DEGREE BEND ANGLE 16 INCH BEND RADIUS
$
76.10
Qty:
Part #:EMTEL400-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 1 STANDARD PACKAGE 4 INCH TRADE SIZE PLAIN END TYPE 45 DEGREE BEND ANGLE 16 INCH BEND RADIUS LENGTH 3-3/8 INCH (STRAIGHT) OFFSET SIZE 17-1/8 INCH
$
93.65
Qty:
Part #:EMTEL012-90
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 1/2 INCH TRADE SIZE PLAIN END TYPE 90 DEGREE BEND ANGLE 4 INCH BEND RADIUS LENGTH 1-1/2 INCH (STRAIGHT) OFFSET SIZE 5-1/2 INCH
$
6.79
Qty:
Part #:EMTEL034-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 3/4 INCH TRADE SIZE PLAIN END TYPE 45 DEGREE BEND ANGLE 4-1/2 INCH BEND RADIUS LENGTH 1-1/2 INCH (STRAIGHT) OFFSET SIZE 5-3/4 INCH
$
5.31
Qty:
Part #:EMTEL034-90
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 3/4 INCH TRADE SIZE PLAIN END TYPE 90 DEGREE BEND ANGLE 4-1/2 INCH BEND RADIUS LENGTH 1-1/2 INCH (STRAIGHT) OFFSET SIZE 6 INCH
$
7.73
Qty:
Part #:EMTEL100-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 1 INCH TRADE SIZE PLAIN END TYPE 45 DEGREE BEND ANGLE 5-3/4 INCH BEND RADIUS LENGTH 1-7/8 INCH (STRAIGHT) OFFSET SIZE 7-1/4 INCH
$
6.57
Qty:
Displaying: 1 - 24 of 35 Matching Items