Allied Moled Products
3M
View:
Active Filters :
- Mfr / Trade Name: 3M Allied Moled Products CANTEX INC
$
2.37
Qty:
$
2.37
Qty:
$
2.37
Qty:
$
2.37
Qty:
$
2.37
Qty:
$
2.37
Qty:
Part #:3MCP-25WBPLUS
- UL 1479, ULC, FM, WHB (CANADA AND US), CAN/ULC S115 APPROVAL 12 STANDARD PACKAGE 10.1 FLUID OUNCE QUANTITY PHYSICAL FORM SOLID/PASTE BOILING POINT 100 DEG C COLOR RED SPECIFIC GRAVITY 1.35 TENSILE STRENGTH 85 PSI VAPOR PRESSURE 17.5 MILLIMETER OF MERCURY TEMPERATURE RATING 40 TO 122 DEG F APPLICATION HVAC DUCT AND VENT, METALLIC AND NON-METALLIC PIPE, BLANK OPENING, SINGLE AND BUNDLED CABLE, INSULATED PIPE, PIPE AND CABLE THROUGH-PENETRATION, BUSWAY, COMBO, RATED WALL, FLOOR AND FLOOR-CEILING ASSEMBLY, STATIC CONSTRUCTION JOINT
$
10.88
Qty:
Part #:3M1755-3/4X60FT
- FRICTION TAPE TYPE COTTON CLOTH MATERIAL 60 FT 3/4 INCH BLACK MANUFACTURERS COLOR NAME NO NON-TOXIC 48 LB WEIGHT CAPACITY NO WATER RESISTANT TEMFLEX[TM] BRAND THICKNESS 13 MIL ADHESIVE MATERIAL THERMOSETABLE RUBBER RESIN TEMPERATURE RATING 15 TO 176 DEG F PACKAGING QUANTITY 20 ROLL PER CASE SERIES 1755 MODEL
$
7.84
Qty:
Part #:3MFP301-1/2-48
- HEAT TYPE FLEXIBLE POLYOLEFIN MATERIAL BLACK COLOR 48 INCH 0.5 INCH MIN. EXPANDED DIAMETER 0.25 INCH MAX. RECOVERED DIAMETER UL, CSA APPROVAL 600 V VOLTAGE RATING 0.025 INCH THICKNESS -67 TO 275 DEG F TEMPERATURE RATING 21 SHRINK RATIO THIN WALL TYPE 212 DEG F SHRINK TEMPERATURE 3M[T] BRAND PACKAGING QUANTITY 12 PER BOX SIZE 1/2 INCH FP-301 MODEL
$
3.75
Qty:
Part #:3MFP301-3/4-48IN-BLACK
- HEAT TYPE FLEXIBLE POLYOLEFIN MATERIAL BLACK COLOR 48 INCH 0.75 INCH MIN. EXPANDED DIAMETER 0.375 INCH MAX. RECOVERED DIAMETER UL, CSA APPROVAL 600 V VOLTAGE RATING 0.3 INCH THICKNESS -67 TO 275 DEG F TEMPERATURE RATING 21 SHRINK RATIO THIN WALL TYPE 212 DEG F SHRINK TEMPERATURE 3M[T] BRAND PACKAGING QUANTITY 12 PER BOX SIZE 3/4 INCH FP-301 MODEL
$
7.49
Qty:
Part #:3MFP301-1-48IN-BLACK-5-PCS
- HEAT TYPE FLEXIBLE POLYOLEFIN MATERIAL BLACK COLOR 48 INCH 1 INCH MIN. EXPANDED DIAMETER 0.5 INCH MAX. RECOVERED DIAMETER UL, CSA APPROVAL 600 V VOLTAGE RATING 0.35 INCH THICKNESS -67 TO 275 DEG F TEMPERATURE RATING 21 SHRINK RATIO THIN WALL TYPE 212 DEG F SHRINK TEMPERATURE 3M[T] BRAND PACKAGING QUANTITY 5 PER BOX SIZE 1 INCH FP-301 MODEL
$
7.20
Qty:
$
46.68
Qty:
$
22.51
Qty:
$
45.02
Qty:
Part #:3MSCOTCHFIL
- INSULATING, SELF FUSING TYPE MASTIC, EPR MATERIAL BLACK FINISH 60 INCH 1.5 INCH 176 DEG F MAX. CONTINUOUS TEMPERATURE UL APPROVAL 600 V VOLTAGE RATING 125 MIL THICKNESS 125 THICKNESS IN MIL 22.6 KV DIELECTRIC STRENGTH SCOTCHFIL[T] BRAND THICKNESS IN MIL 125 SCOTCHFIL MODEL
$
20.43
Qty:
$
29.49
Qty:
$
60.00
Qty:
Part #:3MCC-2
- COLORLESS COLOR CLEANING CABLE INSULATION, METAL, ELECTRICAL AND MECHANICAL PART APPLICATION CAN CONTAINER TYPE 144 DEG F (CLOSED CUP), 165 DEG F (OPEN CUP) FLASH POINT LIQUID CLEANER TYPE 3M BRAND ROHS COMPLIANT BOILING POINT 380 TO 480 DEG F VAPOR PRESSURE 0.2 MILLIMETER HG SPECIFIC GRAVITY 0.76 INCLUDES (3) UNSATURATED CABLE CLEANING PAD AND (1) NON-CONDUCTIVE GRIT ABRASIVE CLOTH CC MODEL
$
28.77
Qty:
Part #:ENT034CO100
-
Description
CANTEX A51AGA1 is a 3/4 in. x 100 ft. coil Blue EZ-Flex Flexible ENT Electrical Nonmetallic Tubing which is a high performance low cost alternative to electrical metallic tubing.
Features
Used in ceilings, walls and slabs and is concrete tight when proper solvent cement is used
Non-conductive and corrosion resistant
Corrugated design allows for hand bending
Meets NEMA TC-13 and NEC Article 331 Standards
ETL Listed
Made in USA
$
1.46
Qty:
Part #:ALM9313-EWK
- OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 5-15/16 INCH 3-1/4 INCH 2-7/8 INCH 3 GANG(S) UL 514C APPROVAL (4) EARS, WING BRACKET MOUNTING 25 STANDARD PACKAGE 42.5 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN 9313-EW MODEL
$
5.76
Qty:
Part #:ALM9331-ESK
- OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2-3/8 INCH 3-1/4 INCH 2-1/2 INCH 1 GANG(S) UL 514C APPROVAL (2) EARS, SNAP BRACKET MOUNTING 50 STANDARD PACKAGE 14 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN 9331-ES MODEL
$
2.06
Qty:
Part #:ALM9342-HN
- MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 4 INCH 4 INCH 2-1/4 INCH UL 514C APPROVAL (2) NAIL, HN HANGER MOUNTING 50 STANDARD PACKAGE 27.3 CU INCH CAPACITY (2) WIRE CLAMPS CABLE ENTRY FIBERGLASSBOX[TM] BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (WIRE CLAMP/BRACKET), ZINC PLATED STEEL (SCREW) USED ON NON-METALLIC SHEATHED CABLE
$
3.05
Qty:
Part #:ALM9343-NK
- MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 4-1/16 INCH 4-1/16 INCH 2-1/2 INCH UL 514C APPROVAL (2) NAILS MOUNTING 50 STANDARD PACKAGE 32.3 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY FIBERGLASSBOX[TM] BRAND COLOR BEIGE/TAN MATERIAL PLATED CARBON STEEL (NAIL), ZINC PLATED STEEL (SCREW), PVC (SPEED CLAMP) USED ON NON-METALLIC SHEATHED CABLE
$
4.16
Qty:
Displaying: 25 - 48 of 60 Matching Items