KIDDE
3M
View:
Active Filters :
- Mfr / Trade Name: 3M KIDDE NCI Lighting s.e.s.
$
2.37
Qty:
$
2.37
Qty:
$
2.37
Qty:
$
2.37
Qty:
$
2.37
Qty:
$
2.37
Qty:
closeout
$
8.95
Qty:
Part #:3MCP-25WBPLUS
- UL 1479, ULC, FM, WHB (CANADA AND US), CAN/ULC S115 APPROVAL 12 STANDARD PACKAGE 10.1 FLUID OUNCE QUANTITY PHYSICAL FORM SOLID/PASTE BOILING POINT 100 DEG C COLOR RED SPECIFIC GRAVITY 1.35 TENSILE STRENGTH 85 PSI VAPOR PRESSURE 17.5 MILLIMETER OF MERCURY TEMPERATURE RATING 40 TO 122 DEG F APPLICATION HVAC DUCT AND VENT, METALLIC AND NON-METALLIC PIPE, BLANK OPENING, SINGLE AND BUNDLED CABLE, INSULATED PIPE, PIPE AND CABLE THROUGH-PENETRATION, BUSWAY, COMBO, RATED WALL, FLOOR AND FLOOR-CEILING ASSEMBLY, STATIC CONSTRUCTION JOINT
$
10.88
Qty:
Part #:3M1755-3/4X60FT
- FRICTION TAPE TYPE COTTON CLOTH MATERIAL 60 FT 3/4 INCH BLACK MANUFACTURERS COLOR NAME NO NON-TOXIC 48 LB WEIGHT CAPACITY NO WATER RESISTANT TEMFLEX[TM] BRAND THICKNESS 13 MIL ADHESIVE MATERIAL THERMOSETABLE RUBBER RESIN TEMPERATURE RATING 15 TO 176 DEG F PACKAGING QUANTITY 20 ROLL PER CASE SERIES 1755 MODEL
$
7.84
Qty:
Part #:3MFP301-1/2-48
- HEAT TYPE FLEXIBLE POLYOLEFIN MATERIAL BLACK COLOR 48 INCH 0.5 INCH MIN. EXPANDED DIAMETER 0.25 INCH MAX. RECOVERED DIAMETER UL, CSA APPROVAL 600 V VOLTAGE RATING 0.025 INCH THICKNESS -67 TO 275 DEG F TEMPERATURE RATING 21 SHRINK RATIO THIN WALL TYPE 212 DEG F SHRINK TEMPERATURE 3M[T] BRAND PACKAGING QUANTITY 12 PER BOX SIZE 1/2 INCH FP-301 MODEL
$
3.75
Qty:
Part #:3MFP301-3/4-48IN-BLACK
- HEAT TYPE FLEXIBLE POLYOLEFIN MATERIAL BLACK COLOR 48 INCH 0.75 INCH MIN. EXPANDED DIAMETER 0.375 INCH MAX. RECOVERED DIAMETER UL, CSA APPROVAL 600 V VOLTAGE RATING 0.3 INCH THICKNESS -67 TO 275 DEG F TEMPERATURE RATING 21 SHRINK RATIO THIN WALL TYPE 212 DEG F SHRINK TEMPERATURE 3M[T] BRAND PACKAGING QUANTITY 12 PER BOX SIZE 3/4 INCH FP-301 MODEL
$
7.49
Qty:
Part #:3MFP301-1-48IN-BLACK-5-PCS
- HEAT TYPE FLEXIBLE POLYOLEFIN MATERIAL BLACK COLOR 48 INCH 1 INCH MIN. EXPANDED DIAMETER 0.5 INCH MAX. RECOVERED DIAMETER UL, CSA APPROVAL 600 V VOLTAGE RATING 0.35 INCH THICKNESS -67 TO 275 DEG F TEMPERATURE RATING 21 SHRINK RATIO THIN WALL TYPE 212 DEG F SHRINK TEMPERATURE 3M[T] BRAND PACKAGING QUANTITY 5 PER BOX SIZE 1 INCH FP-301 MODEL
$
7.20
Qty:
$
46.68
Qty:
$
22.51
Qty:
$
45.02
Qty:
Part #:3MSCOTCHFIL
- INSULATING, SELF FUSING TYPE MASTIC, EPR MATERIAL BLACK FINISH 60 INCH 1.5 INCH 176 DEG F MAX. CONTINUOUS TEMPERATURE UL APPROVAL 600 V VOLTAGE RATING 125 MIL THICKNESS 125 THICKNESS IN MIL 22.6 KV DIELECTRIC STRENGTH SCOTCHFIL[T] BRAND THICKNESS IN MIL 125 SCOTCHFIL MODEL
$
20.43
Qty:
$
29.49
Qty:
$
60.00
Qty:
Part #:3MCC-2
- COLORLESS COLOR CLEANING CABLE INSULATION, METAL, ELECTRICAL AND MECHANICAL PART APPLICATION CAN CONTAINER TYPE 144 DEG F (CLOSED CUP), 165 DEG F (OPEN CUP) FLASH POINT LIQUID CLEANER TYPE 3M BRAND ROHS COMPLIANT BOILING POINT 380 TO 480 DEG F VAPOR PRESSURE 0.2 MILLIMETER HG SPECIFIC GRAVITY 0.76 INCLUDES (3) UNSATURATED CABLE CLEANING PAD AND (1) NON-CONDUCTIVE GRIT ABRASIVE CLOTH CC MODEL
$
28.77
Qty:
Part #:KIDI9040E
- The Fire Sentry i9040 smoke alarm is a battery operated smoke alarm that utilizes ionization sensing technology. The four (4) inch unit is smaller in diameter giving it discreet design with the same quality you would expect in a Kidde manufactured product. The i9040 is powered by a 9V battery, providing continuous protection, even during power outages. This easy to install unit includes a test button to verify the detection electronics are working as intended.
Benefits
The Fire Sentry i9040 battery operated, single station smoke alarm provides an early warning signal to you and your family in the event of a fire hazard. The i9040 operates on a 9V battery power source that provided continuous protection even during a power outage, Installation is easy, no wiring required. This unit is UL Listed and includes a 3 year limited warranty.
This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Battery Operated (9V Battery Included) &ndash Easy installation and provides continuous protection even during power outages.
Test Button &ndash Tests unit&rsquos electronic circuitry, horn and battery function.
Low Battery Indicator &ndash Low battery warning chirp alerts user to change battery.
Discreet Design &ndash Four (4) inch diameter.
Technical Specifications
Model Number
i9040
Power Source
9V Battery (included)
Audio Alarm
85dB at 10ft
Temperature Range
40F to 100F (4°C to 38°C)
Humidity Range
up to 85% relative humidity (RH)
Sensor
Ionization
Size
4&rdquo in diameter x 1.45&rdquo depth
Weight
.5lbs
Interconnects
No
Warranty
3 year limited
$
8.13
Qty:
Part #:KIDI9050
- The Kidde i9050 is a full size, ionization, battery operated smoke alarm designed to protect you and your family from the dangers of smoke and fire. The i9050 is powered by a 9V battery, providing continuous protection even during power outages. This unit includes a flashing red LED to indicate the alarm is receiving power. The i9050 is UL Listed and includes a 10 year limited warranty.
Benefits
The Kidde i9050 basic, battery operated smoke alarm provides you and your family an early warning signal against the dangers of fire and smoke. This easy to install smoke alarm includes a test button to verify the unit&rsquos electronic circuitry, horn and battery function are work properly. The i9050 also includes a tamper resist feature to help deter theft or tampering. This smoke alarm is powered by a 9V battery and is suitable for all living areas. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation &ndash No wiring required.
Battery Operated (9V battery included) &ndash Provides continuous protection even during power failures.
Quality Design &ndash 10 year limited warranty.
Flashing LED &ndash Indicates alarm is receiving power.
Test Button &ndash Verifies battery and alarm operation.
Low Battery Indicator &ndash Chirps when battery needs replacement.
Technical Specifications
Model
i9050
Power Source
9V Battery (included)
Audio Alarm
85dB at 10ft
Temperature Range
40F to 100F (4C to 38C)
Humidity Range
up to 85% relative humidity (RH)
Sensor
Ionization
Size
5&rdquo in diameter x 1.75&rdquo depth
Weight
.62lbs
Interconnects
No
LED
Red, normal operation
Warranty
10 year limited warranty
$
9.22
PK
Qty:
Part #:KIDHD135F
-
The Kidde HD135F is a 120VAC Wire In Heat Alarm that responds to temperature rather than smoke.
The Kidde HD135F 120VAC wire in heat alarm gives you and your family an early warning to dangerous temperatures of 135F or more
This unit also includes a tamper resist pin that helps to deter thief and tampering.
This unit can be used as a single station unit or it can be interconnected to up to 24 Kidde devices in a multiple station arrangement
The Kidde HD135F is a 120VAC Wire In Heat Alarm that responds to temperature rather than smoke. The alarm will sound if temperatures rise above 135F. The Kidde HD135F is interconnectable. The interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiating devices (Smoke, heat, CO, etc) interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. This unit includes a 5-year limited warranty and is UL Listed.
Interconnectable &ndash Interconnects with up to 24 Kidde devices of which 18 can be initiating.
Test Button &ndash Tests unit&rsquos electronic circuitry, horn and battery function.
9V Battery Back Up &ndash Provides continuous protection even during power outages.
Red LED &ndash Flashes every 30-40 seconds to indicate proper operation.
Low Battery Indicator &ndash Alerts user in the event of alow or missing battery.
Quick Connect Power Harness &ndash Makes installation fast and easy.
Technical Specifications
Model
HD135F
UPC Number
0-25417-84135-0
Power Source
120VAC, 60HZ, 9V battery backup
Sensor
Heat
Audio Alarm
85dB at 10ft
Temperature Range
-20F to +100F (-29C and +38C)
Humidity Range
5%-95% relative humidity (RH)
Size
5&rdquo in diameter x 2&rdquo depth
Weight
.75lbs
Interconnects
Up to 24 Kidde devices of which 18 can be initiating devices.
LED
Green, AC power present, alarm mode flashing Red indicates originating unit
Warranty
5 year limited warranty
$
34.89
Qty:
Part #:BRK9120B
- 120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money.
» Single button test/silence » 9V Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Smart Technology - helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » 10-Year Limited Warranty
$
10.73
Qty:
Part #:BRKSC9120B
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
44.25
Qty:
Displaying: 25 - 48 of 57 Matching Items