4-1/2" H X 4-1/2" W X 3-5/8" D
1-1/4 In
View:
Active Filters :
Part #:STSSCN114
- SET SCREW TYPE STEEL MATERIAL IMC/RIGID/EMT CONDUIT USED ON UL 514B, CUL APPROVAL 25 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB1 INCLUDES (2) SET SCREW
$
1.39
Qty:
Part #:CRC02094
- WATER WHITE COLOR -40 TO 400 DEG F TEMPERATURE RATING CAN CONTAINER TYPE 10 OUNCE CONTAINER SIZE SILICONE BASE 0 DEG F FLASH POINT AEROSOL, LIQUID PHYSICAL FORM ROHS COMPLIANT UNIT PACKAGE 16 OUNCE FILM TYPE DRY, CLEAR, NON-HARDENING ODOR MILD SOLVENT BOILING POINT 118.4 DEG F PROPELLANT TYPE HYDROCARBON DIELECTRIC STRENGTH 350 MILLIVOLT SPECIFIC GRAVITY 0.6694 EVAPORATION RATE FAST VAPOR PRESSURE 1577.3 HECTOPASCAL VAPOR DENSITY GREATER THAN 1 (AIR EQUAL TO 1) VOC CONTENT 649.9 GPL OVERALL DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 7.75 INCH HEIGHT APPLICABLE STANDARD NSF H1
$
12.91
Qty:
Part #:CRC14077
- POLYURETHANE TYPE TAN COLOR UL APPLICABLE STANDARD FILLING, INSULATING, SEALING, BONDING, HVAC, ELECTRICAL, INDUSTRIAL, PLUMBING, AROUND ELECTRICAL OUTLET, UTILITY PANEL, DUCT, PIPE, DOOR, WINDOW, BASE PLATE, JOINT, CRACK, CRAWLSPACE, FOUNDATION, SPOT INSULATING, TOUCH-UP APPLICATION -200 TO 200 DEG F TEMPERATURE RATING AEROSOL CAN CONTAINER TYPE 16 OUNCE CONTAINER CAPACITY 12 TO 24 HOUR (CURE TIME) SETTING TIME ROHS COMPLIANT OVERALL DIMENSION 2.19 INCH WIDTH X 2.19 INCH DEPTH X 8.06 INCH HEIGHT SPECIFIC GRAVITY 1.2 VOC CONTENT 35 GRAM PER LITER NET FILL 12 OUNCE
$
16.54
Qty:
Part #:SERCN114
- DIE-CAST ZINC MATERIAL (2) SCREW CLAMP INSTALLATION NON-METALLIC SHEATHED/ROMEX CABLE CABLE TYPE (3) 3 AWG, (3) 2 AWG CABLE SIZE UL APPROVAL 100 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE NON-INSULATED, OVAL SHAPE THROAT TYPE
$
3.35
Qty:
Part #:EHCL114
- CLAMP-ON TYPE CAST ALUMINUM MATERIAL 4.61 INCH L X 3.32 INCH H SIZE RIGID/EMT CONDUIT USED ON UL APPROVAL 1-1/4 INCH TRADE SIZE 5 HOLE(S) ROHS COMPLIANT PACKAGING QUANTITY 25
$
10.31
Qty:
Part #:CB114
- DIE CAST ZINC MATERIAL RIGID CONDUIT USED ON UL APPROVAL 250 PER CARTON STANDARD PACKAGE 1-1/4 INCH TRADE SIZE CB MODEL
$
4.04
Qty:
Part #:KO114
- SNAP-IN TYPE STEEL MATERIAL 1-1/4 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 250
$
0.65
Qty:
Part #:WTCN114
- DIE-CAST ZINC MATERIAL 2 INCH SERVICE ENTRANCE CABLE USED ON 0.51 INCH X 0.93 INCH MIN. OPENING 0.59 INCH X 0.98 INCH MAX. OPENING 2 AWG CABLE SIZE UL APPROVAL 1-1/4 INCH TRADE SIZE WATERTIGHT ROHS COMPLIANT PACKAGING QUANTITY 50
$
10.61
Qty:
Part #:FXCN114
- STRAIGHT TYPE DIE-CAST ZINC MATERIAL 1.91 INCH SQUEEZE INSTALLATION UL APPROVAL 100 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE 1.42 TO 1.65 INCH CORD SIZE NON-INSULATED THROAT TYPE FLEX METAL CONDUIT SINGLE CABLE OPENING
$
4.63
Qty:
Part #:PB114
- POLYPROPYLENE MATERIAL IMC/RIGID CONDUIT USED ON UL 514C APPROVAL 105 DEG C TEMPERATURE RATING 250 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE NON-INSULATED THROAT TYPE ROHS COMPLIANT COLOR GRAY
$
0.34
Qty:
Part #:STCMCN114
- COMPRESSION TYPE STEEL MATERIAL EMT CONDUIT USED ON UL 514B APPROVAL 20 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
2.23
Qty:
Part #:IGB114
- DIE-CAST ZINC, PLASTIC LINER MATERIAL RIGID CONDUIT USED ON 14 AWG SOLID TO 4 AWG STRANDED WIRE SIZE COPPER/ALUMINUM CONDUCTOR MATERIAL UL 467, UL 514B APPROVAL 125 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE INSULATED THROAT TYPE LAY-IN, ALUMINUM LUG TYPE ROHS COMPLIANT TEMPERATURE RATING 150 DEG C (LINER)
$
4.71
Qty:
Part #:SELHPAK14J
- ANCHOR, SHEET METAL SCREW TYPE 201 PIECE(S) BOX PACKAGING TYPE (100) SHEET METAL SCREW, (100) ANCHOR, (1) CARBIDE MASONRY DRILL KIT CONTENT DRILL SIZE 5/16 INCH COLOR RED SERIES K6 MODEL
$
15.92
KIT
Qty:
Part #:SELPAK14J
- ANCHOR, SHEET METAL SCREW TYPE 201 PIECE(S) BOX PACKAGING TYPE (100) SHEET METAL SCREW, (100) ANCHOR, (1) CARBIDE MASONRY DRILL KIT CONTENT SERIES K6 MODEL
$
15.57
KIT
Qty:
Part #:SELMXK14J
- ANCHOR, SHEET METAL SCREW TYPE 201 PIECE(S) BOX PACKAGING TYPE (100) PHILLIPS/SLOTTED SHEET METAL SCREW, (100) #122 YELLOW ANCHOR, (1) CARBIDE MASONRY DRILL KIT CONTENT 7.5 INCH LENGTH X 3.3 INCH WIDTH X 1.5 INCH HEIGHT PACKAGING SIZE DRIVE TYPE PHILLIPS/SLOTTED MATERIAL ZINC ALLOY PC 4610 MODEL
$
16.24
Qty:
Part #:GREE128AVP
- HYDRAULIC, BATTERY, RATCHET TYPE PUNCH UNIT USED ON HOLE SIZE 1.701 INCH DIA OVERALL SIZE KNOCKOUT DIE 1 1/4 INCH CONDUIT/PIPE SIZE SLUG-BUSTER[R] BRAND CAPACITY 10 GAUGE MILD STEEL
$
25.15
Qty:
Part #:KLRKGECLT-1M
- ELECTRO ZINC CHROMATE SEALED ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON ALLOY BODY, ELECTROSTATICALLY APPLIED POWDER COATED COPPER FREE ALUMINUM COVER MATERIAL ROUND SHAPE 1/2 INCH HUB SIZE 2 HUB(S) UL 886, CSA C22.2 APPROVAL CLASS I GROUP C D, CLASS I ZONE 1 GROUP IIA IIB, CLASS II, CLASS III ENCLOSURE INTERNALLY THREADED COVER TYPE 19 CU INCH CAPACITY L STYLE (2) SIDE HUB LOCATION EXTERNAL HUB TYPE 2-11/16 INCH COVER OPENING DIAMETER HUBBELL[R] BRAND WITH GROUND SCREW GEC MODEL
$
77.48
Qty:
Part #:KLRKGECLT-2M
- ELECTRO ZINC CHROMATE SEALED ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON ALLOY BODY, ELECTROSTATICALLY APPLIED POWDER COATED COPPER FREE ALUMINUM COVER MATERIAL ROUND SHAPE 3/4 INCH HUB SIZE 2 HUB(S) UL 886, CSA C22.2 APPROVAL CLASS I GROUP C D, CLASS I ZONE 1 GROUP IIA IIB, CLASS II, CLASS III ENCLOSURE INTERNALLY THREADED COVER TYPE 19 CU INCH CAPACITY L STYLE (2) SIDE HUB LOCATION EXTERNAL HUB TYPE 2-11/16 INCH COVER OPENING DIAMETER HUBBELL[R] BRAND WITH GROUND SCREW GEC MODEL
$
82.91
Qty:
Part #:MIDWB12
- BOLT-ON MOUNTING 10 STANDARD PACKAGE 1-1/4 INCH CONDUIT SIZE
$
11.14
Qty:
Displaying: 1 - 20 of 20 Matching Items