Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To
4 in Square Box
View:
Active Filters :
- Application: 4 in Square Box Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To Lighting Provides a Change in Direction in a Conduit Run Tap Connector / Grounding Connector
Part #:APS-8NS232
- NARROW STRIP TYPE 2-3/4 INCH 3-5/16 INCH 96 INCH LAMP LENGTH 8 FOOT NOMINAL LENGTH ELECTRONIC BALLAST TYPE 4 LAMP(S) T8 LAMP TYPE COOPER LIGHTING BRAND POWER RATING 32 WATT CHANNEL MATERIAL DIE FORMED COLD ROLLED STEEL APPLICATION DAMP LOCATION, INDUSTRIAL, COMMERCIAL, RETAIL, RESIDENTIAL APPROVAL UL, CUL APS-NS MODEL
$
51.43
Qty:
Part #:CUTTP512
- RAISED TYPE STEEL MATERIAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (1) TOGGLE SWITCH OPENING TYPE 1/2 INCH RAISED COOPER CROUSE-HINDS. BRAND
$
1.84
Qty:
Part #:CUTTP516
- RAISED TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 5.5 CUBIC INCH CAPACITY 4 INCH DEPTH BOX SIZE (1) DUPLEX RECEPTACLE OPENING TYPE 1/2 INCH RAISED
$
1.62
Qty:
Part #:CUTTP508
- RAISED TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (2) TOGGLE SWITCH OPENING TYPE 1/2 INCH RAISED
$
2.06
Qty:
Part #:CUTTP510
- RAISED TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (2) DUPLEX RECEPTACLE OPENING TYPE 1/2 INCH RAISED
$
1.96
Qty:
Part #:CUTTP506
- RAISED TYPE STEEL MATERIAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (1) DUPLEX RECEPTACLE, (1) TOGGLE SWITCH OPENING TYPE 1/2 INCH RAISED COOPER CROUSE-HINDS. BRAND
$
2.18
Qty:
Part #:EMTEL300-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 1 STANDARD PACKAGE 3 INCH TRADE SIZE PLAIN END TYPE 45 DEGREE BEND ANGLE 13 INCH BEND RADIUS LENGTH 3-1/8 INCH (STRAIGHT) OFFSET SIZE 14-1/2 INCH
$
182.80
Qty:
Part #:EMTEL012-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 1/2 INCH TRADE SIZE PLAIN END TYPE 45 DEGREE BEND ANGLE 4 INCH BEND RADIUS LENGTH 1-1/2 INCH (STRAIGHT) OFFSET SIZE 5-3/8 INCH
$
5.40
Qty:
Part #:CUTTP478
- FLAT TYPE STEEL MATERIAL UL APPROVAL 50 STANDARD PACKAGE 4 INCH BOX SIZE 1/2 INCH KNOCKOUT OPENING TYPE APPLICABLE STANDARD NEC 370
$
1.31
Qty:
Part #:ENY-2M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 3/4 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-9/32 INCH TURNING RADIUS HUBBELL[R] BRAND ENY MODEL
$
29.33
Qty:
Part #:ENY-1M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE THREADED, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 1/2 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-3/16 INCH TURNING RADIUS OVERALL DIMENSION 3-15/16 INCH H ENY MODEL
$
24.98
Qty:
Part #:KLRKENY-3M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 1 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-13/32 INCH TURNING RADIUS HUBBELL[R] BRAND ENY MODEL
$
37.73
Qty:
Part #:KLRKENY-4M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP C D, CLASS I ZONE 1 GROUP IIA IIB, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 1-1/4 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-25/32 INCH TURNING RADIUS HUBBELL[R] BRAND ENY MODEL
$
46.14
Qty:
Part #:KILLENY-5M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE THREADED, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 1-1/2 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-29/32 INCH TURNING RADIUS OVERALL DIMENSION 5-11/16 INCH H ENY MODEL
$
69.40
Qty:
Part #:KILLENY-6M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE THREADED, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 2 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 2-5/16 INCH TURNING RADIUS OVERALL DIMENSION 6-3/8 INCH H ENY MODEL
$
89.98
Qty:
Part #:EMTEL400-22-1/2
- STEEL MATERIAL GALVANIZED FINISH UL (CANADA AND US) APPROVAL 1 STANDARD PACKAGE 4 INCH TRADE SIZE PLAIN END TYPE 22.5 DEGREE BEND ANGLE 16 INCH BEND RADIUS
$
76.10
Qty:
Part #:EMTEL400-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 1 STANDARD PACKAGE 4 INCH TRADE SIZE PLAIN END TYPE 45 DEGREE BEND ANGLE 16 INCH BEND RADIUS LENGTH 3-3/8 INCH (STRAIGHT) OFFSET SIZE 17-1/8 INCH
$
93.65
Qty:
Part #:EMTEL100-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 1 INCH TRADE SIZE PLAIN END TYPE 45 DEGREE BEND ANGLE 5-3/4 INCH BEND RADIUS LENGTH 1-7/8 INCH (STRAIGHT) OFFSET SIZE 7-1/4 INCH
$
6.57
Qty:
Part #:EMTEL100-90
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 1 INCH TRADE SIZE PLAIN END TYPE 90 DEGREE BEND ANGLE 5-3/4 INCH BEND RADIUS LENGTH 1-7/8 INCH (STRAIGHT) OFFSET SIZE 7-5/8 INCH
$
8.34
Qty:
Part #:EMTEL114-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 20 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE PLAIN END TYPE 45 DEGREE BEND ANGLE 7-1/4 INCH BEND RADIUS LENGTH 2 INCH (STRAIGHT) OFFSET SIZE 8-1/2 INCH
$
12.75
Qty:
Part #:EMTEL114-90
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 20 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE PLAIN END TYPE 90 DEGREE BEND ANGLE 7-1/4 INCH BEND RADIUS LENGTH 2 INCH (STRAIGHT) OFFSET SIZE 9-1/4 INCH
$
17.59
Qty:
Part #:EMTEL112-45
- STEEL MATERIAL GALVANIZED FINISH UL, UL (CANADA AND US) APPROVAL 15 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE PLAIN END TYPE 45 DEGREE BEND ANGLE 8-1/4 INCH BEND RADIUS LENGTH 2 INCH (STRAIGHT) OFFSET SIZE 9-1/4 INCH
$
14.82
Qty:
Displaying: 1 - 24 of 43 Matching Items