Compact
7-in-1 Multi-Bit
View:
![3/4 NM CABLE CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN034.jpg)
Part #:RXCN034
- ZINC ELECTROPLATED STEEL MATERIAL (2) SCREW TILT-IN INSTALLATION ROMEX/NON-METALLIC CABLE CABLE TYPE (2) OR (3) 8 AWG, 6 AWG, 4 AWG CABLE SIZE 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE 3/4 INCH, 1 INCH KNOCKOUT SIZE NON-INSULATED THROAT TYPE
$
1.58
Qty:
![3/8 ROMEX CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN038.jpg)
Part #:RXCN038
- STRAIGHT TYPE DIE-CAST ZINC MATERIAL (2) SCREW INSTALLATION UL 514B APPROVAL 1000 STANDARD PACKAGE 3/8 INCH TRADE SIZE 1/2 INCH KNOCKOUT SIZE (2) 14 AWG, (2) 12 AWG CORD SIZE NON-INSULATED THROAT TYPE NON-METALLIC CABLE SINGLE CABLE OPENING
$
0.38
Qty:
![PVC NM CBL CONN 1 WIRE [Romex Connector, NM-B Connector]](https://southerntierelectricsupply.com/productimage/detail/ARLNM840.jpg)
Part #:ARLNM840
- STRAIGHT TYPE PVC MATERIAL 0.965 INCH OUTER DIAMETER X 1.406 INCH LENGTH SIZE UL, CSA APPROVAL 3/8 INCH THREAD SIZE KNOCKOUT SIZE 1/2
$
0.24
Part #:ARLNM841
- STRAIGHT, PUSH-IN TYPE PLASTIC MATERIAL 1.125 INCH DIA X 1.34 INCH L SIZE UL, CSA APPROVAL 1/2 INCH THREAD SIZE PACKAGING QUANTITY 1000 PER PACK
$
0.43
$
1.45
Qty:
Part #:ARLNM95
- Plastic, 3/4" knockout size Push-in connector snaps into knockout using light finger pressure, holds wires securely and is simple to remove with the twist of a screw driver.
$
0.45
Part #:ARLNMLT10
- STRAIGHT TYPE UV RATED PLASTIC MATERIAL NON-METALLIC TYPE B CONDUIT USED ON UL, CSA APPROVAL 25 STANDARD PACKAGE 1 INCH TRADE SIZE SNAP-IT[R] BRAND KNOCKOUT SIZE 1 INCH OVERALL DIMENSION 1.856 INCH DIAMETER X 2.53 INCH LENGTH COLOR GRAY INSTALLATION PUSH-ON
$
4.75
Part #:ARLNMLT7
- Non Metallic sraight snap2it connector for use with non metallic liquid tight conduit type B only. Push on installation. 3/4" Trade Size.
$
3.10
Part #:ARLNM842
- Non-metallic Push-In connector utilizes a wedge push in design for a secure grip with a knockout size of 3/4 inch.
$
0.64
Part #:ARL841ST
- DIE CAST ZINC BODY, SPRING STEEL CLIP MATERIAL (2) SCREW INSTALLATION NON-METALLIC CABLE CABLE TYPE (1) 14/2 AWG AND (1) 14/3 AWG, (1) 14/2 AWG TO 10/2 AWG CABLE SIZE UL, CSA APPROVAL 1000 STANDARD PACKAGE 3/8 INCH TRADE SIZE 1/2 INCH KNOCKOUT SIZE SNAP-TITE[R] BRAND APPLICABLE STANDARD NEMA FB-1
$
0.63
Part #:ARLSG38AST
- "Zinc die-cast, 1/2"" knockout saddle-type connector with spring set screw for securing aluminum and steel cable. Snaps into knockout with external spring steel clip. Provided with insulated throat. Concrete tight when taped. Supports .405 to .612 cable range with a .400 end stop diameter."
$
1.33
$
59.01
Qty:
$
156.48
Qty:
Part #:CWDAH460R7W
- NYLON PA6 MATERIAL 4 WIRE(S) UL 1682, UL 1686, CSA C22.2 APPROVAL 480 VAC 3-PHASE VOLTAGE RATING 60 AMPERE CURRENT RATING 3 POLE(S) WATERTIGHT ARROW HART[R] BRAND APPLICABLE STANDARD IEC 60309-1/60309-2 FLAMMABILITY RATING UL 94- HB (HOUSING), UL 94-V0 (CONTACT CARRIERS) AH MODEL
$
416.48
Qty:
Part #:KLE31872
- CARBIDE TIPPED MATERIAL 4 PIECE(S) (3) CARBIDE HOLE CUTTER, (1) PILOT BIT CONTENT KLEIN BRAND CARBIDE HOLE CUTTER PART NUMBER 7/8 INCH 31852, 1-1/8 INCH 31856, 1-3/8 INCH 31860 CONDUIT/PIPE SIZE 1/2 TO 1 INCH
Part #:KLENCVT-5KIT
-
Electrical Tester Kit with Dual-Range NCVT and GFCI Receptacle Tester
NCVT5KIT
NCVT-5A provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, as well as AC voltage in security, entertainment, communications, environmental control and irrigation systems
Dual-range testing select 12 to 1000V AC which is perfect for low voltage systems such as doorbells, environmental control or irrigation systems, or select 70 to 1000V AC which is perfect for detecting systems such as electrical mains supply
NCVT-5A delivers simultaneous visual and audible voltage indicators when AC voltage is detected
Audible voltage indicator beeps at a greater frequency the higher the voltage that is sensed, or the closer to the voltage source it is
Bright integrated laser pointer for identifying objects of interest at distance on the jobsite
RT210 detects the most common wiring problems in standard and GFCI receptacles
Works on GFCI outlets and confirms operation of the ground fault protective device
Conditions the RT210 indicates open ground, reverse polarity, open hot, open neutral, hot/ground reversed
Qty:
Part #:KLECL120KIT
-
Clamp Meter Electrical Test Kit
CL120KIT
Measure AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads
Detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed
Line splitter allows the measuring of current draw up to 15A without splitting the load's power cord
CAT III 600V, Class 2, Double insulation safety rating
AC Auto-Ranging 400 amp digital clamp meter
Backlit display for clear readings
Includes a case, test leads and batteries
Qty:
Part #:KLECL320
-
HVAC Digital Clamp Meter, AC Auto-Ranging 400 Amp
CL320
Clamp Meter measures AC current and NCVT via clamp and AC/DC voltage, resistance, frequency, DC microamps, capacitance, duty cycle, diode test, and continuity via test-leads, and temperature with thermocouple
Non-contact voltage tester integrated into the clamp jaw
Backlit LCD for ease of viewing in low light
Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy
Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands free operation
Measures temperature with a K-Type thermocouple probe
Auto-Range, Data Hold, and Max/Min value
Auto-power off after 10 minutes to conserve battery life
Includes a carrying case, test leads with CAT III/CAT IV safety caps, thermocouple, instructions, and 3 x AAA batteries
Low battery indicator and easily accessible battery compartment
Built to withstand a 6.6-Foot (2 m) drop
CAT III 600V, Class 2, Double insulation safety rating
Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations
$
99.96
Part #:KLECL390
-
AC/DC Digital Clamp Meter, Auto-Ranging 400 Amp
CL390
Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands free operation
Non-contact voltage tester integrated into the clamp jaw
High-visibility reverse contrast LCD display for improved view ability in all ambient lighting conditions
Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy
Measures AC/DC current and NCVT via clamp and AC/DC voltage, resistance, frequency, DC microamps, capacitance, duty cycle, diode test, and continuity via test-leads, and temperature with thermocouple
Measures temperature with a K-Type thermocouple probe
Max/Min, Rel/Zero and Data Hold capability
Auto-power off after 10 minutes to conserve battery life
Includes a carrying case, test leads with CAT III/CAT IV safety caps, thermocouple, instructions, and 3 x AAA batteries
Low battery indicator and easily accessible battery compartment
Built to withstand a 6.6-Foot (2 m) drop
CAT III 600V, Class 2, Double insulation safety rating
Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations
Displaying: 1 - 24 of 69 Matching Items