Connector
7-in-1 Screwdriver/nutdriver
View:
![3/4 NM CABLE CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN034.jpg)
Part #:RXCN034
- ZINC ELECTROPLATED STEEL MATERIAL (2) SCREW TILT-IN INSTALLATION ROMEX/NON-METALLIC CABLE CABLE TYPE (2) OR (3) 8 AWG, 6 AWG, 4 AWG CABLE SIZE 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE 3/4 INCH, 1 INCH KNOCKOUT SIZE NON-INSULATED THROAT TYPE
$
1.58
Qty:
![3/8 ROMEX CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN038.jpg)
Part #:RXCN038
- STRAIGHT TYPE DIE-CAST ZINC MATERIAL (2) SCREW INSTALLATION UL 514B APPROVAL 1000 STANDARD PACKAGE 3/8 INCH TRADE SIZE 1/2 INCH KNOCKOUT SIZE (2) 14 AWG, (2) 12 AWG CORD SIZE NON-INSULATED THROAT TYPE NON-METALLIC CABLE SINGLE CABLE OPENING
$
0.38
Qty:
![PVC NM CBL CONN 1 WIRE [Romex Connector, NM-B Connector]](https://southerntierelectricsupply.com/productimage/detail/ARLNM840.jpg)
Part #:ARLNM840
- STRAIGHT TYPE PVC MATERIAL 0.965 INCH OUTER DIAMETER X 1.406 INCH LENGTH SIZE UL, CSA APPROVAL 3/8 INCH THREAD SIZE KNOCKOUT SIZE 1/2
$
0.24
Part #:ARLNM841
- STRAIGHT, PUSH-IN TYPE PLASTIC MATERIAL 1.125 INCH DIA X 1.34 INCH L SIZE UL, CSA APPROVAL 1/2 INCH THREAD SIZE PACKAGING QUANTITY 1000 PER PACK
$
0.43
$
1.45
Qty:
Part #:ARLNM95
- Plastic, 3/4" knockout size Push-in connector snaps into knockout using light finger pressure, holds wires securely and is simple to remove with the twist of a screw driver.
$
0.45
Part #:ARLNMLT10
- STRAIGHT TYPE UV RATED PLASTIC MATERIAL NON-METALLIC TYPE B CONDUIT USED ON UL, CSA APPROVAL 25 STANDARD PACKAGE 1 INCH TRADE SIZE SNAP-IT[R] BRAND KNOCKOUT SIZE 1 INCH OVERALL DIMENSION 1.856 INCH DIAMETER X 2.53 INCH LENGTH COLOR GRAY INSTALLATION PUSH-ON
$
4.75
Part #:ARLNMLT7
- Non Metallic sraight snap2it connector for use with non metallic liquid tight conduit type B only. Push on installation. 3/4" Trade Size.
$
3.10
Part #:ARLNM842
- Non-metallic Push-In connector utilizes a wedge push in design for a secure grip with a knockout size of 3/4 inch.
$
0.64
Part #:ARL841ST
- DIE CAST ZINC BODY, SPRING STEEL CLIP MATERIAL (2) SCREW INSTALLATION NON-METALLIC CABLE CABLE TYPE (1) 14/2 AWG AND (1) 14/3 AWG, (1) 14/2 AWG TO 10/2 AWG CABLE SIZE UL, CSA APPROVAL 1000 STANDARD PACKAGE 3/8 INCH TRADE SIZE 1/2 INCH KNOCKOUT SIZE SNAP-TITE[R] BRAND APPLICABLE STANDARD NEMA FB-1
$
0.63
Part #:ARLSG38AST
- "Zinc die-cast, 1/2"" knockout saddle-type connector with spring set screw for securing aluminum and steel cable. Snaps into knockout with external spring steel clip. Provided with insulated throat. Concrete tight when taped. Supports .405 to .612 cable range with a .400 end stop diameter."
$
1.33
Part #:MILBU5168-XTL-200-KK
- RINGLESS TYPE 14-1/8 INCH W X 4-1/2 INCH D X 32 INCH H SIZE 6 AWG TO 350 KCMIL (LINE) WIRE SIZE GALVANIZED STEEL ENCLOSURE MATERIAL UL APPROVAL 240 VAC VOLTAGE RATING SURFACE MOUNTING NEMA 3R ENCLOSURE 200 AMPERE CURRENT RATING 1-PHASE 3-WIRE CIRCUIT CONFIGURATION OVERHEAD/UNDERGROUND SERVICE TYPE 8 CIRCUIT(S) CLOSING PLATE HUB TYPE (1) (1/4 INCH - 1/2 INCH), (4) (1/2 INCH - 3/4 INCH), (2) (1/2 INCH - 3/4 INCH - 1 INCH), (3) (3/4 INCH - 1 INCH - 1-1/4 INCH - 1-1/2 INCH - 2 INCH), (1) (1 INCH - 1-1/4 INCH - 1-1/2 INCH - 2 INCH - 2-1/2 INCH), (1) (1-1/4 INCH - 1-1/2 INCH - 2 INCH - 2-1/2 INCH - 3 INCH) CONCENTRIC KNOCKOUT KNOCKOUT(S) 4 JAW(S) HORN BYPASS SWITCH 22 KILOAMPERE INTERRUPTING RATING CIRCUIT BREAKER MAIN DISCONNECT TYPE U5168 MODEL
$
356.30
Part #:MILU7021-RL-TG-KK-RGE
- 200 AMP O/H AND UNDERGROUND RESIDENTIAL WITH TEST TABS:
$
99.52
Part #:IDE35-908
- SCREWDRIVER/NUTDRIVER TYPE 6 PIECE(S) YELLOW/BLACK HANDLE COLOR (1) 1/4 INCH SLOTTED, (1) 3/16 INCH SLOTTED, (1) #1 PHILLIPS, (1) #2 PHILLIPS, (1) 1/4 INCH NUTDRIVER, (6)5/16 INCH NUTDRIVER SET CONTENT IDEAL BRAND
$
19.13
Part #:MIDWR101CB2
- METERED RINGLESS TYPE G90 GALVANIZED STEEL MATERIAL ZINC COATED FINISH 1 AWG TO 300 KCMIL STRANDED (COPPER/ALUMINUM, LOAD CB BASE), 1 AWG TO 300 KCMIL STRANDED (COPPER/ALUMINUM, NEUTRAL LG SINGLE LUGS), 14 TO 8 AWG SOLID/14 TO 1/0 AWG STRANDED (COPPER, NEUTRAL SMALL SINGLE HOLES), 12 TO 8 AWG SOLID/12 TO 1/0 AWG STRANDED (ALUMINUM, NEUTRAL SMALL SINGLE HOLE), 14 TO 8 AWG SOLID/10 TO 4 AWG STRANDED (COPPER, NEUTRAL SIX LARGE HOLE), 6 TO 4 AWG STRANDED (ALUMINUM, NEUTRAL SIX LARGE HOLE), 14 TO 8 AWG SOLID/12 TO 8 AWG STRANDED (COPPER, NEUTRAL SMALL HOLE), 12 TO 8 AWG SOLID/STRANDED (ALUMINUM, NEUTRAL SMALL HOLE), 12 TO 8 AWG SOLID/12 TO 2 AWG STRANDED (COPPER/ALUMINUM, GROUND) WIRE SIZE UL APPROVAL NEMA 3R ENCLOSURE 100 AMPERE CURRENT RATING 1-PHASE CIRCUIT CONFIGURATION CB2100 FIRST POSITION CIRCUIT BREAKER TYPE APPLICABLE STANDARD NEMA, NEC VOLTAGE RATING 120/240 V CABINET DIMENSION 14-3/4 INCH W X 4-9/16 INCH D X 26-1/4 INCH H MOUNTING SURFACE
$
385.72
Part #:MIDWR208CR2A
- National Electric Code requires electrical distribution equipment to be rated as Service Entrance, wherever electrical power enters a building or other structure. Service entrance products are typically utilized on single-family residences and mobile homes. Midwest Electric offers a broad range of surface mount and pedestal units, factory assembled and wired. Pedestal units come standard with loop feed lugs to reduce installation time and labor expense. Service Entrance equipment is made of heavy, galvanized G-90 steel, preventing corrosion and fading.
$
633.96
Part #:MIDWR281CB1
- METERED RINGLESS TYPE G90 GALVANIZED STEEL MATERIAL ZINC COATED FINISH 6 TO 350 KCMIL STRANDED (COPPER/ALUMINUM, LINE METER SOCKET), 1 TO 4 AWG STRANDED (COPPER/ALUMINUM, LOAD BASE LUG/NEUTRAL A), 6 TO 2/0 AWG STRANDED (COPPER/ALUMINUM, NEUTRAL/GROUND B), 14 TO 8 AWG SOLID/14 TO 4 AWG STRANDED (COPPER, NEUTRAL/GROUND C), 12 WIRE SIZE UL APPROVAL NEMA 3R ENCLOSURE 200 AMP CURRENT RATING 1-PHASE CIRCUIT CONFIGURATION CB4200H FIRST POSITION CIRCUIT BREAKER TYPE MIDWEST ELECTRIC BRAND VOLTAGE RATING 120/240 VOLT CABINET DIMENSION 14-3/8 INCH WIDTH X 4-3/4 INCH DEPTH X 28-5/8 INCH HEIGHT MOUNTING TYPE SURFACE APPLICABLE STANDARD NEMA, NEC
$
302.92
Part #:MIDWR281C1P6H
- National Electric Code requires electrical distribution equipment to be rated as Service Entrance, wherever electrical power enters a building or other structure. Service entrance products are typically utilized on single-family residences and mobile homes. Midwest Electric offers a broad range of surface mount and pedestal units, factory assembled and wired. Pedestal units come standard with loop feed lugs to reduce installation time and labor expense. Service Entrance equipment is made of heavy, galvanized G-90 steel, preventing corrosion and fading.
$
842.70
Part #:MILBU2161-XT
- 13 TERM RNGLS 2 LRG CLS PLTS TEST SW PROV 24IN-34IN-12IN PNTD STL SGL FRONT LIFT OFF SCR CVR HSP
$
9,215.30
$
783.11
Displaying: 1 - 24 of 37 Matching Items