Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To
Allows Access for Inspection, Pulling and Maintenance
View:
Active Filters :
- Application: Allows Access for Inspection, Pulling and Maintenance Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To Fan and Fixture Reduces the Size of Knockout Holes
Part #:ARLFB415
- FAN/FIXTURE TYPE 0.5 INCH .5 DEPTH IN INCH 4.25 DIAMETER IN INCH ROUND SHAPE 25 APPROVAL 4.25 INCH DIAMETER BRACKET MOUNTING UL, CSA STANDARD PACKAGE 10.3 CU INCH CAPACITY APPLICATION 1/2 INCH OR 5/8 INCH DRYWALL
$
6.87
Qty:
Part #:ARLFB426
- CEILING MOUNTING ARLINGTON BRAND OVERALL DIMENSION 4.25 INCH WIDTH X 6.25 INCH HEIGHT INCLUDES READY TO TIGHTEN CENTER SCREW, INSTALLED NON-METALLIC CABLE CONNECTOR, MUD COVER, SECOND KNOCKOUT AND (2) SCREW FOR FAN/FIXTURE BRACKET INSTALLATION USED ON 1/2 TO 5/8 INCH DRYWALL CEILING WI
$
9.71
Qty:
Part #:ARLFB423
- FAN/FIXTURE TYPE 1.25 INCH 1.25 DEPTH IN INCH 4.25 DIAMETER IN INCH ROUND SHAPE 25 APPROVAL 4.25 INCH DIAMETER BRACKET MOUNTING UL, CSA STANDARD PACKAGE 19.3 CU INCH CAPACITY APPLICATION 1/2 INCH OR 5/8 INCH DRYWALL
$
8.59
Qty:
$
21.10
Qty:
Part #:ARLFB450
- CEILING FAN/FIXTURE TYPE 0.7881 INCH .7881 DEPTH IN INCH 3.875 DIAMETER IN INCH ROUND SHAPE 6 APPROVAL 3.875 INCH DIAMETER BRACKET MOUNTING UL, CSA STANDARD PACKAGE 14.5 CU INCH CAPACITY SIZE 7.88 INCH L X 7.88 INCH W X 9.73 H DEPTH IN INCH - UOM IN DIAMETER IN INCH - UOM IN
$
34.77
Qty:
Part #:ARLFB900
- CEILING MOUNTING OVERALL DIMENSION 7.881 INCH WIDTH X 7.881 INCH HEIGHT FINISH TEXTURED/PAINTABLE INCLUDES MOUNTING BLOCK, BUILT-IN ELECTRIC BOX, NM94 CABLE CONNECTOR, (2) SCREW USED ON 80 DEGREE OR GREATER CATHEDRAL CEILING APPROVAL UL, CSA
$
29.56
Qty:
Part #:TLB112
- ALUMINUM MATERIAL 7.88 INCH L X 3.72 INCH H SIZE IMC/RIGID CONDUIT USED ON 1-1/2 INCH HUB SIZE THREADED (IMC/RIGID) INSTALLATION LB CONFIGURATION 2 HUB(S) UL 514B APPROVAL 90 DEGREE HUB LOCATION BACK ACCESS OPENING INCLUDES COVER AND GASKET PACKAGING QUANTITY 10
$
16.20
Qty:
Part #:CLB100
- ALUMINUM MATERIAL IMC/RIGID/EMT CONDUIT USED ON 1 INCH HUB SIZE THREADED (IMC/RIGID), SET SCREW (EMT) INSTALLATION LB CONFIGURATION 2 HUB(S) UL APPROVAL 90 DEGREE HUB LOCATION BACK ACCESS OPENING INCLUDES COVER AND GASKET PACKAGING QUANTITY 25
$
8.62
Qty:
Part #:RW034X012
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1/2 INCH SMALL END TRADE SIZE 3/4 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.20
Qty:
Part #:RW100X012
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1/2 INCH SMALL END TRADE SIZE 1 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.33
Qty:
Part #:RW100X034
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 3/4 INCH SMALL END TRADE SIZE 1 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.33
Qty:
Part #:RW114X034
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 3/4 INCH SMALL END TRADE SIZE 1-1/4 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.71
Qty:
Part #:RW114X100
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1 INCH SMALL END TRADE SIZE 1-1/4 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.71
Qty:
Part #:RW112X012
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1/2 INCH SMALL END TRADE SIZE 1-1/2 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.93
Qty:
Part #:RW112X034
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 3/4 INCH SMALL END TRADE SIZE 1-1/2 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.93
Qty:
Part #:RW112X100
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1 INCH SMALL END TRADE SIZE 1-1/2 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.87
Qty:
Part #:RW112X114
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1-1/4 INCH SMALL END TRADE SIZE 1-1/2 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.87
Qty:
Part #:RW200X012
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1/2 INCH SMALL END TRADE SIZE 2 INCH LARGE END TRADE SIZE 500 STANDARD PACKAGE
$
1.18
Qty:
Displaying: 1 - 24 of 75 Matching Items