Commercial Products
Alumaflex
View:
Active Filters :
- Sub Brand: Alumaflex Commercial Products Firex Ultra
Part #:CUTTP480
- FLAT TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 4 INCH BOX SIZE (1) DEVICE OPENING TYPE ROUNDED CORNER TYPE NUMBER OF GANGS 1
$
1.72
Qty:
Part #:CUTTP494
- FLAT TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 4 INCH BOX SIZE (2) DEVICE OPENING TYPE ROUNDED CORNER TYPE NUMBER OF GANGS 2
$
2.27
Qty:
Part #:KIDHD135F
-
The Kidde HD135F is a 120VAC Wire In Heat Alarm that responds to temperature rather than smoke.
The Kidde HD135F 120VAC wire in heat alarm gives you and your family an early warning to dangerous temperatures of 135F or more
This unit also includes a tamper resist pin that helps to deter thief and tampering.
This unit can be used as a single station unit or it can be interconnected to up to 24 Kidde devices in a multiple station arrangement
The Kidde HD135F is a 120VAC Wire In Heat Alarm that responds to temperature rather than smoke. The alarm will sound if temperatures rise above 135F. The Kidde HD135F is interconnectable. The interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiating devices (Smoke, heat, CO, etc) interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. This unit includes a 5-year limited warranty and is UL Listed.
Interconnectable &ndash Interconnects with up to 24 Kidde devices of which 18 can be initiating.
Test Button &ndash Tests unit&rsquos electronic circuitry, horn and battery function.
9V Battery Back Up &ndash Provides continuous protection even during power outages.
Red LED &ndash Flashes every 30-40 seconds to indicate proper operation.
Low Battery Indicator &ndash Alerts user in the event of alow or missing battery.
Quick Connect Power Harness &ndash Makes installation fast and easy.
Technical Specifications
Model
HD135F
UPC Number
0-25417-84135-0
Power Source
120VAC, 60HZ, 9V battery backup
Sensor
Heat
Audio Alarm
85dB at 10ft
Temperature Range
-20F to +100F (-29C and +38C)
Humidity Range
5%-95% relative humidity (RH)
Size
5&rdquo in diameter x 2&rdquo depth
Weight
.75lbs
Interconnects
Up to 24 Kidde devices of which 18 can be initiating devices.
LED
Green, AC power present, alarm mode flashing Red indicates originating unit
Warranty
5 year limited warranty
$
34.89
Qty:
Part #:BNH750
- CEILING TYPE 9 INCH LENGTH X 9 INCH WIDTH X 6 INCH HEIGHT SIZE UL, HVI APPROVAL 120 VOLT AT 60 HERTZ VOLTAGE RATING 1.9 AMP CURRENT RATING NO LAMP INCLUDED INCANDESCENT LAMP TYPE 100 WATT LAMP WATTAGE RUGGED 26 GAUGE GALVANIZED STEEL HOUSING MATERIAL 100 CFM AIR FLOW RATE 4 INCH DIAMETER DUCT SIZE 3.5 SONES SOUND LEVEL 15 INCH DIAMETER GRILL SIZE SQUARE HOUSING SHAPE ROUND DUCT SHAPE ROUND GRILL SHAPE WHITE POLYMERIC GRILL FINISH 90 SQUARE FOOT VENTILATION AREA INCLUDES PLUG-IN PERMANENTLY LUBRICATED MOTOR, DAMPER STANDARD PACKAGE 1 PER PACK
$
136.07
Qty:
Part #:ALURD2-2-4-6-CR
- RHH/RHW-2/USE-2 TYPE 500 FT 944 MIL OUTER DIAMETER ALUMINUM ALLOY CONDUCTOR MATERIAL UL 44, UL 854 APPROVAL 600 V VOLTAGE RATING 100 AMPERE CURRENT RATING 305 LB/1000 FT WEIGHT 4 CONDUCTOR(S) XLPE INSULATION MATERIAL (2) 2 AWG (PHASE), 6 AWG (GROUND) CONDUCTOR SIZE REEL PACKAGE TYPE 7 STRANDS STRANDING 4 AWG TRIPLE EXTRUDED WHITE STRIPED NEUTRAL CONDUCTOR SIZE SOUTHWIRE[R] BRAND
$
156.35
Qty:
Part #:ALURD4/0-4/0-2/0-4CR
- RHH/RHW-2/USE-2 TYPE 500 FT 1540 MIL OUTER DIAMETER ALUMINUM ALLOY CONDUCTOR MATERIAL UL 44, UL 854 APPROVAL 600 V VOLTAGE RATING 200 AMPERE CURRENT RATING 793 LB/1000 FT WEIGHT 4 CONDUCTOR(S) XLPE INSULATION MATERIAL (2) 4/0 AWG (PHASE), 4 AWG (GROUND) CONDUCTOR SIZE REEL PACKAGE TYPE 7 STRANDS STRANDING 2/0 AWG TRIPLE EXTRUDED WHITE STRIPED NEUTRAL CONDUCTOR SIZE SOUTHWIRE[R] BRAND
$
384.25
Qty:
Part #:KIDI4618A
- The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation
&bull Front battery pull tab allows battery activation without removing alarm from mounting bracket.
&bull Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
&bull Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
&bull Large centrally located Test/Hush® alarm control button.
&bull Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
User-Friendly Features
&bull Easy access front loading battery door.
&bull Battery backup provides protection in case of power failure.
&bull Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user&rsquos guide for complete instructions.
Technical Specifications
Model
i4618
UPC
0-47871-07581-2
Power Source
120VAC (80mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40°F (4.4°C) to 100°F (37.8°C)
Humidity Range
Up to 85% relative humidity (RH)
Size
5.6 in diameter x 1.8 in depth
Weight
.5lbs
Interconnects
Up to 24 Kidde devices
LED
Green, receiving ac power,Red, 4 modes of operation
Warranty
5 year limited
$
12.77
Qty:
Part #:I12040
- SMOKE ALARM WITH STROBE LIGHT TYPE AC/DC IONIZATION OPERATION TYPE UL APPROVAL 85 DB AT 10 FT HORN TYPE 120 VAC 60 HZ WITH 9 V BATTERY BACKUP VOLTAGE RATING/SOURCE LED INDICATING CONDITION LED/STROBE TYPE 24 INTERCONNECTION(S) SIZE 6.5 INCH W X 13.25 INCH D X 6 INCH H
$
23.04
Qty:
Part #:CUTTP432
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (8) 3/4 INCH SIDE KNOCKOUT SIZE 12 KNOCKOUT(S) (4) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
8.09
Qty:
Part #:CUTTP451
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (6) 1/2 INCH SIDE, (3) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (4) BOTTOM, (9) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.75
Qty:
Part #:CUTTP322
- FLAT TYPE STEEL MATERIAL UL, CSA APPROVAL 4 INCH DIAMETER 50 STANDARD PACKAGE BLANK OPENING TYPE
$
1.01
Qty:
Part #:CUTTP472
- FLAT TYPE STEEL MATERIAL UL APPROVAL 50 STANDARD PACKAGE 4 INCH BOX SIZE BLANK OPENING TYPE COVER THICKNESS 0.063 INCH
$
0.95
Qty:
Part #:CUTTP568
- FLAT TYPE STEEL MATERIAL UL, CSA APPROVAL 25 STANDARD PACKAGE 4-11/16 INCH BOX SIZE BLANK OPENING TYPE
$
0.98
Qty:
Part #:CUTTP608
- FLAT TYPE STEEL MATERIAL CSA APPROVAL 100 STANDARD PACKAGE BLANK OPENING TYPE COOPER CROUSE-HINDS. BRAND
$
0.72
Qty:
Part #:CUTTP512
- RAISED TYPE STEEL MATERIAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (1) TOGGLE SWITCH OPENING TYPE 1/2 INCH RAISED COOPER CROUSE-HINDS. BRAND
$
1.84
Qty:
Part #:CUTTP516
- RAISED TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 5.5 CUBIC INCH CAPACITY 4 INCH DEPTH BOX SIZE (1) DUPLEX RECEPTACLE OPENING TYPE 1/2 INCH RAISED
$
1.62
Qty:
Part #:CUTTP508
- RAISED TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (2) TOGGLE SWITCH OPENING TYPE 1/2 INCH RAISED
$
2.06
Qty:
Part #:CUTTP510
- RAISED TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (2) DUPLEX RECEPTACLE OPENING TYPE 1/2 INCH RAISED
$
1.96
Qty:
Part #:CUTTP506
- RAISED TYPE STEEL MATERIAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (1) DUPLEX RECEPTACLE, (1) TOGGLE SWITCH OPENING TYPE 1/2 INCH RAISED COOPER CROUSE-HINDS. BRAND
$
2.18
Qty:
Part #:CUTTP423
- WELDED STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 22 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH, 3/4 INCH) ECCENTRIC BOTTOM, (6) 1/2 INCH SIDE, (3) (1/2 INCH, 3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (4) BOTTOM, (9) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FED SPEC W-J-800E, NEMA OS-1
$
3.05
Qty:
Part #:CUTTP557
- DRAWN STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VS BRACKET MOUNTING 25 STANDARD PACKAGE 42 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (5) 1/2 INCH SIDE, (4) 3/4 INCH CONCENTRIC SIDE KNOCKOUT SIZE 14 KNOCKOUT(S) (5) BOTTOM, (9) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
16.13
Qty:
Part #:CUTTP484
- RAISED TYPE STEEL MATERIAL UL, CSA APPROVAL 50 PER PACK STANDARD PACKAGE 3.8 CUBIC INCH CAPACITY 4 INCH BOX SIZE (1) DEVICE OPENING TYPE 1/2 INCH RAISED SQUARE CUT CORNER TYPE
$
1.11
Qty:
Part #:CUTTP576
- RAISED TYPE STEEL MATERIAL UL APPROVAL 25 STANDARD PACKAGE 3.3 CU INCH CAPACITY 4-11/16 INCH BOX SIZE (1) DEVICE OPENING TYPE 1/2 INCH RAISED ROUNDED CORNER TYPE NUMBER OF GANGS 1
$
2.86
Qty:
Part #:CUTTP486
- RAISED TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (1) DEVICE OPENING TYPE 3/4 INCH RAISED SQUARE CUT CORNER TYPE NUMBER OF GANGS 1
$
1.33
Qty:
Displaying: 1 - 24 of 139 Matching Items