Condulet
Alumaflex
View:
Active Filters :
- Sub Brand: Alumaflex Condulet powr-fish® Universal Quik-Lok
Part #:ALURD2-2-4-6-CR
- RHH/RHW-2/USE-2 TYPE 500 FT 944 MIL OUTER DIAMETER ALUMINUM ALLOY CONDUCTOR MATERIAL UL 44, UL 854 APPROVAL 600 V VOLTAGE RATING 100 AMPERE CURRENT RATING 305 LB/1000 FT WEIGHT 4 CONDUCTOR(S) XLPE INSULATION MATERIAL (2) 2 AWG (PHASE), 6 AWG (GROUND) CONDUCTOR SIZE REEL PACKAGE TYPE 7 STRANDS STRANDING 4 AWG TRIPLE EXTRUDED WHITE STRIPED NEUTRAL CONDUCTOR SIZE SOUTHWIRE[R] BRAND
$
156.35
Qty:
Part #:ALURD4/0-4/0-2/0-4CR
- RHH/RHW-2/USE-2 TYPE 500 FT 1540 MIL OUTER DIAMETER ALUMINUM ALLOY CONDUCTOR MATERIAL UL 44, UL 854 APPROVAL 600 V VOLTAGE RATING 200 AMPERE CURRENT RATING 793 LB/1000 FT WEIGHT 4 CONDUCTOR(S) XLPE INSULATION MATERIAL (2) 4/0 AWG (PHASE), 4 AWG (GROUND) CONDUCTOR SIZE REEL PACKAGE TYPE 7 STRANDS STRANDING 2/0 AWG TRIPLE EXTRUDED WHITE STRIPED NEUTRAL CONDUCTOR SIZE SOUTHWIRE[R] BRAND
$
384.25
Qty:
Part #:MILW49-22-0175
- Get added convenience and reach with the Milwaukee 8-Piece 6" Universal QUIK-LOK Flat Boring Bit Set. Bore small, clean holes at any angle in a variety of materials. The double wing spurs provide easy hole formation while reducing vibration and preventing "break out." The patented cutting edge produces easier and faster wood boring and fast chip removal, allowing heat from the bit to dissipate. The Universal QUIK-LOK allows quick and easy accessory changes, as well as added reach in hard-to-work areas. The kit includes 3/8", 1/2", 5/8", 3/4", 7/8", 1" and 1-1/8" bits plus a 6" QUIK-LOK Extension in a carrying case. Bullets Sharp cutting edge Patented edge promotes easy wood boring, faster chip removal and reduced vibration Clean holes Double wing spurs allow for fast, clean hole cutting Versatile 1/4" Quick-change hex shank can be used in all universal QUIK-LOK extensions Convenient 8-Piece set provides quick and easy accessory changes 80035
$
25.73
Qty:
Part #:CRS670
- BLANK, SCREW, WEDGENUT TYPE SHEET STEEL (COVER), STAINLESS STEEL (SCREW) MATERIAL 7 INCH UL 514B, CSA C22.2 APPROVAL 2 INCH TRADE SIZE FORM 7 FORM TYPE COOPER CROUSE-HINDS BRAND APPLICATION NON-HAZARDOUS LOCATION
$
23.41
Qty:
Part #:CRSGASK571
- NEOPRENE MATERIAL 3.625 INCH CLIP-ON COVER TYPE 1/2 INCH TRADE SIZE FORM 7 FORM TYPE CONDULET[R] BRAND APPLICATION NON-HAZARDOUS LOCATION USED ON CONDUIT BODY
$
6.76
Qty:
Part #:CRSGASK576
- NEOPRENE MATERIAL 7 INCH CLIP-ON COVER TYPE 2 INCH TRADE SIZE FORM 7 FORM TYPE CONDULET[R] BRAND APPLICATION NON-HAZARDOUS LOCATION USED ON CONDUIT BODY
$
13.57
Qty:
Part #:CRSGASK578
- NEOPRENE MATERIAL 9.125 INCH CLIP-ON COVER TYPE 2-1/2 INCH, 3 INCH TRADE SIZE FORM 7 FORM TYPE CONDULET[R] BRAND APPLICATION NON-HAZARDOUS LOCATION USED ON CONDUIT BODY
$
22.53
Qty:
Part #:CRSLL67
- ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY (BODY), STAINLESS STEEL (SCREW) MATERIAL 8.125 INCH LENGTH X 3.125 INCH WIDTH X 4.125 INCH HEIGHT SIZE RIGID CONDUIT USED ON 2 INCH HUB SIZE THREADED INSTALLATION LL CONFIGURATION 2 HUB(S) UL 514B, CSA C22.2 APPROVAL ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY, SNAP TIGHT, SCREW COVER TYPE 90 DEGREE HUB LOCATION FORM 7 FORM TYPE LEFT SIDE ACCESS OPENING COOPER CROUSE-HINDS BRAND APPLICATION NON-HAZARDOUS LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586D LL MODEL
$
132.71
Qty:
Part #:CRSLR37
- ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY (BODY), STAINLESS STEEL (SCREW) MATERIAL 6 INCH LENGTH X 1.875 INCH WIDTH X 2.75 INCH HEIGHT SIZE RIGID CONDUIT USED ON 1 INCH HUB SIZE THREADED INSTALLATION LR CONFIGURATION 2 HUB(S) UL 514B, CSA C22.2 APPROVAL ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY, SNAP TIGHT, SCREW COVER TYPE 90 DEGREE HUB LOCATION FORM 7 FORM TYPE RIGHT SIDE ACCESS OPENING COOPER CROUSE-HINDS BRAND APPLICATION NON-HAZARDOUS LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586D LR MODEL
$
23.63
Qty:
Part #:CRSLR67
- ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY (BODY), STAINLESS STEEL (SCREW) MATERIAL 8.125 INCH LENGTH X 3.125 INCH WIDTH X 4.125 INCH HEIGHT SIZE RIGID CONDUIT USED ON 2 INCH HUB SIZE THREADED INSTALLATION LR CONFIGURATION 2 HUB(S) UL 514B, CSA C22.2 APPROVAL ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY, SNAP TIGHT, SCREW COVER TYPE 90 DEGREE HUB LOCATION FORM 7 FORM TYPE RIGHT SIDE ACCESS OPENING COOPER CROUSE-HINDS BRAND APPLICATION NON-HAZARDOUS LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586D LR MODEL
$
132.71
Qty:
Part #:CRST27
- ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY (BODY), STAINLESS STEEL (SCREW) MATERIAL 6.25 INCH LENGTH X 2 INCH WIDTH X 2.625 INCH HEIGHT SIZE RIGID CONDUIT USED ON 3/4 INCH HUB SIZE THREADED INSTALLATION T CONFIGURATION 3 HUB(S) UL 514B, CSA C22.2 APPROVAL ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY, SNAP TIGHT, SCREW COVER TYPE TEE HUB LOCATION FORM 7 FORM TYPE SIDE ACCESS OPENING COOPER CROUSE-HINDS BRAND APPLICATION NON-HAZARDOUS LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION WC-586D T MODEL
$
32.63
Qty:
Part #:IDE31-340
- PULLING, FISHING TYPE POLYFIBER MATERIAL WHITE WITH BLUE TRACER COLOR 6500 FOOT POWER FISHING SYSTEM, CONDUIT USED ON 210 POUND TENSILE STRENGTH BUCKET PACKAGING TYPE IDEAL BRAND
$
62.51
Qty:
Part #:IDE31-344
- PULLING TYPE POLYFIBER MATERIAL WHITE, RED TRACER COLOR 2200 FT CONDUIT USED ON 500 LB TENSILE STRENGTH BUCKET PACKAGING TYPE POWR-FISH[R] BRAND
$
83.89
Qty:
Displaying: 1 - 13 of 13 Matching Items