Vs Bracket
Angled Mid Nails With Adjustable Stabilizer Bar
View:
Active Filters :
Sold Out
Sold Out
Sold Out
Sold Out
$
476.02
Qty:
Part #:BNH68W
- DUPLEX, 2-FUNCTION TYPE WHITE COLOR BATH AND VENTILATION FAN APPLICATION 120 VOLT, 15 AMP SWITCH 1 TYPE 120 VOLT, 15 AMP SWITCH 2 TYPE TYPE 2-FUNCTION
$
22.17
Qty:
Part #:LEVIP710-DLZ
- WALL DIMMER TYPE 2.12 INCH W X 1.41 INCH D X 4.15 INCH H SIZE WHITE, IVORY, LIGHT ALMOND FINISH MULTI LOCATION, SINGLE POLE, THREE WAY OPERATION TYPE UL, CSA APPROVAL COMMERCIAL APPLICATION 120/277 VAC AT 60 HZ VOLTAGE RATING 1200 VA LOAD RATING SLIDE, ELECTRO MECHANICAL PRESET ON/OFF SWITCH OPERATOR TYPE DECORA, MULTI GANG WALL PLATE TYPE FLUORESCENT LOAD TYPE ILLUMATECH[T], DECORA[R] BRAND WITH LED LOCATOR OPERATING TEMPERATURE 0 TO 55 DEG C
$
56.73
Qty:
Part #:ALM5305-NBK
- NEW WORK TYPE FIBERGLASS REINFORCED POLYESTER BMC MATERIAL 9-5/16 INCH 3-3/4 INCH 3-9/16 INCH 5 GANG(S) ANSI/UL 514C APPROVAL ANGLED MID NAIL, ADJUSTABLE STABILIZING BAR MOUNTING 6 PER CARTON STANDARD PACKAGE 94 CUBIC INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE ALLIED MOULDED BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (BRACKET), PLATED CARBON STEEL (FASTENER, CLAMP) USED ON NON-METALLIC SHEATHED CABLE APPLICATION RESIDENTIAL
$
23.54
Qty:
Part #:HAM1414PHE
- STEEL MATERIAL PHOSPHATIZED POWDER COATED FINISH ANSI 61 GRAY COLOR 6 INCH 6 INCH 4 INCH UL 508, UL, CSA, CE, JIC EGP-1 APPROVAL BRACKET MOUNTING NEMA 12/13, IP54 ENCLOSURE CONTINUOUS HINGE, CLAMP, GASKETED, SCREW COVER TYPE 16/14 GAUGE BODY, 14 GAUGE COVER MATERIAL SPECIFICATION 14R0505 BACK PANEL ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION ELECTRIC CONTROL HOUSING, HYDRAULIC CONTROL HOUSING, INSTRUMENT ENCLOSURE, JUNCTION BOX, PNEUMATIC CONTROL HOUSING, TERMINAL WIRING ENCLOSURE ENVIRONMENTAL CONDITIONS FALLING DIRT, DUST, OIL, WAT 1414 PH MODEL
$
89.18
Qty:
Part #:HAM1414PHH4
- STEEL MATERIAL PHOSPHATIZED POWDER COATED FINISH ANSI 61 GRAY COLOR 8 INCH 8 INCH 4 INCH UL 508, UL, CSA, CE, JIC EGP-1 APPROVAL BRACKET MOUNTING NEMA 12/13, IP54 ENCLOSURE CONTINUOUS HINGE, CLAMP, GASKETED, SCREW COVER TYPE 16/14 GAUGE BODY, 14 GAUGE COVER MATERIAL SPECIFICATION 14R0707 BACK PANEL ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION ELECTRIC CONTROL HOUSING, HYDRAULIC CONTROL HOUSING, INSTRUMENT ENCLOSURE, JUNCTION BOX, PNEUMATIC CONTROL HOUSING, TERMINAL WIRING ENCLOSURE ENVIRONMENTAL CONDITIONS FALLING DIRT, DUST, OIL, WAT 1414 PH MODEL
$
109.12
Qty:
Part #:HAMCS664
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 6 INCH 6 INCH 4 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
13.24
Qty:
Part #:HAMCS884
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 8 INCH 8 INCH 4 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
18.72
Qty:
Part #:HAMCS886
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 8 INCH 8 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
23.27
Qty:
Part #:HAMCSKO664
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 6 INCH 6 INCH 4 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 16/14 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE (2) (1/2 INCH-3/4 INCH), (1) (3/4 INCH-1 INCH) CONCENTRIC KNOCKOUT TOP/BOTTOM/SIDES KNOCKOUT SIZE 12 KNOCKOUT(S) (3) TOP, (3) BOTTOM, (6) SIDES KNOCKOUT LOCATION ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CSKO MODEL
$
13.24
Qty:
Part #:HAMC3R664HCR
- NEMA 3R ENCLOSURE USED ON HINGE INSTALLATION NEMA 3R ENCLOSURE HAMMOND MANUFACTURING[T] BRAND
$
54.64
Qty:
Part #:HAMHP50
- OIL RESISTANT GASKETED TYPE STEEL MATERIAL GRAY COLOR #8-32 TPI X 0.55 INCH L THREADED STUD, WINGNUT MOUNTING HARDWARE 1.38 INCH HOLE SIZE 0.5 INCH HOLE CONDUIT SIZE HP MODEL
$
7.47
Qty:
Part #:HAMHP75
- OIL TIGHT, OIL RESISTANT GASKETED TYPE STEEL MATERIAL GRAY COLOR #10-24 TPI X 0.55 INCH THREADED STUD, PLATED WINGNUT MOUNTING HARDWARE 1.06 INCH HOLE SIZE 3/4 INCH HOLE CONDUIT SIZE ROHS COMPLIANT PLUG DIAMETER 1.56 INCH HP MODEL
$
9.34
Qty:
Part #:HAMHP100
- OIL TIGHT, OIL RESISTANT GASKETED TYPE STEEL MATERIAL GRAY COLOR #10-24 TPI X 0.55 INCH THREADED STUD, PLATED WINGNUT MOUNTING HARDWARE 1.38 INCH HOLE SIZE 1 INCH HOLE CONDUIT SIZE ROHS COMPLIANT PLUG DIAMETER 1.88 INCH HP MODEL
$
13.00
Qty:
Part #:WATTCI-355
- SENSOR WITH RELAY TYPE 4.5 INCH DIA X 1.45 INCH D SIZE WHITE FINISH CUL APPROVAL CLASSROOM, COMPUTER ROOM, CONFERENCE ROOM, OPEN OFFICE, STORAGE ROOM APPLICATION 120/230/277/347 VAC AT 50/60 HZ VOLTAGE RATING CEILING MOUNTING NEUTRAL WIRE TERMINAL TYPE 0 TO 800 W AT 120 VAC (BALLAST/TUNGSTEN/LED), 0 TO 1200 W AT 230/277 VAC (BALLAST/LED), 0 TO 1500 W AT 347 VAC (BALLAST/LED) LOAD RATING 360 DEG FIELD OF VIEW PASSIVE INFRARED SENSOR TYPE 1200 SQ FT AREA COVERAGE BALLAST/TUNGSTEN/LED, LINE VOLTAGE LOAD TYPE 5/10/15/20/30 MIN (FIXED) TIME DELAY SENSITIVITY ADJUSTMENT PIR (HIGH/LOW) LIGHT INTENSITY 10 TO 300 FOOTCANDLES MOUNTING OPTIONS 4 INCH SQUARE JUNCTION BOX WITH DOUBLE GANG MUD RING, 4 INCH OCTAGONAL J-BOX
$
127.88
Qty:
Part #:PASLSDC16WV
- THREE SPEED, DUAL FAN SPEED, DE-HUMMER TYPE 1.74 INCH W X 1.28 INCH D X 4.185 INCH H SIZE WHITE COLOR SINGLE POLE OPERATION TYPE UL (CANADA AND US), UL, CSA APPROVAL RESIDENTIAL AND LIGHT COMMERCIAL APPLICATION 300 W 1.6 AMPERE LOAD RATING DECORATOR SLIDE, NON-PRESET OPERATOR TYPE TRADEMASTER[R] BRAND APPLICABLE STANDARD NEMA WD-1/WD-6 LS MODEL
$
33.20
Qty:
Part #:CUTTP557
- DRAWN STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VS BRACKET MOUNTING 25 STANDARD PACKAGE 42 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (5) 1/2 INCH SIDE, (4) 3/4 INCH CONCENTRIC SIDE KNOCKOUT SIZE 14 KNOCKOUT(S) (5) BOTTOM, (9) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
16.13
Qty:
Displaying: 1 - 24 of 34 Matching Items