Lighting Controls
Armored/metal Clad Cable
View:
Active Filters :
- Application: Armored/metal Clad Cable Lighting Controls Nm/seu Cable Residential
![3/4 NM CABLE CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN034.jpg)
Part #:RXCN034
- ZINC ELECTROPLATED STEEL MATERIAL (2) SCREW TILT-IN INSTALLATION ROMEX/NON-METALLIC CABLE CABLE TYPE (2) OR (3) 8 AWG, 6 AWG, 4 AWG CABLE SIZE 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE 3/4 INCH, 1 INCH KNOCKOUT SIZE NON-INSULATED THROAT TYPE
$
1.28
Qty:
![3/8 ROMEX CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN038.jpg)
Part #:RXCN038
- STRAIGHT TYPE DIE-CAST ZINC MATERIAL (2) SCREW INSTALLATION UL 514B APPROVAL 1000 STANDARD PACKAGE 3/8 INCH TRADE SIZE 1/2 INCH KNOCKOUT SIZE (2) 14 AWG, (2) 12 AWG CORD SIZE NON-INSULATED THROAT TYPE NON-METALLIC CABLE SINGLE CABLE OPENING
$
0.33
Qty:
![PVC NM CBL CONN 1 WIRE [Romex Connector, NM-B Connector]](https://southerntierelectricsupply.com/productimage/detail/ARLNM840.jpg)
Part #:ARLNM840
- STRAIGHT TYPE PVC MATERIAL 0.965 INCH OUTER DIAMETER X 1.406 INCH LENGTH SIZE UL, CSA APPROVAL 3/8 INCH THREAD SIZE KNOCKOUT SIZE 1/2
$
0.24
Qty:
Part #:ARLNM841
- STRAIGHT, PUSH-IN TYPE PLASTIC MATERIAL 1.125 INCH DIA X 1.34 INCH L SIZE UL, CSA APPROVAL 1/2 INCH THREAD SIZE PACKAGING QUANTITY 1000 PER PACK
$
0.42
Qty:
$
0.26
Qty:
Part #:TOP457
- GRAY PLASTIC MATERIAL SNAP-IN INSTALLATION NON-METALLIC CABLE CABLE TYPE (2) 14 AWG OR (2) 12 AWG CABLE SIZE UL APPROVAL 1000 PER CASE STANDARD PACKAGE 1/2 INCH KNOCKOUT SIZE ROHS COMPLIANT SIZE 1 INCH DIA
$
0.29
Qty:
$
1.45
Qty:
Part #:CWDDF10PC1
- WALL DIMMER TYPE 1.8 INCH W X 1.3 INCH D SIZE ALMOND, WHITE, IVORY FINISH 1-POLE/3-WAY OPERATION TYPE UL (CANADA AND US), UL 1472, NOM 426 APPROVAL 120 VAC VOLTAGE RATING 1200/1660 W LOAD RATING DECORATOR SWITCH WITH PRESET OPERATOR TYPE DECORATOR WALL PLATE TYPE FLUORESCENT/LED LOAD TYPE DEVINE[TM] BRAND TEMPERATURE RATING -4 TO 158 DEG F WIRING TYPE BACK, SIDE
$
52.53
Qty:
Part #:CWDDF10PC2
- WALL DIMMER TYPE 3.31 INCH LENGTH X 2.84 INCH WIDTH X 5.39 INCH HEIGHT SIZE LIGHT ALMOND, WHITE, IVORY FINISH 1-POLE/3-WAY OPERATION TYPE UL (CANADA AND US), UL 1472, NOM 426 APPROVAL RESIDENTIAL APPLICATION 120/277 VOLT AC VOLTAGE RATING 1200/1600 WATT LOAD RATING PRESET OPERATOR TYPE DECORATOR WALL PLATE TYPE DIMMABLE LED, FLUORESCENT 0 TO 10 V BALLAST LOAD TYPE COOPER WIRING DEVICES BRAND MATERIAL POLYCARBONATE WIRING METHOD BACK AND SIDE
$
52.53
Qty:
$
47.89
Qty:
$
47.89
Qty:
$
47.89
Qty:
$
47.89
Qty:
$
169.91
Per Hundred FT
Qty:
Part #:ASD-LMPJBS-6D12CC-WH
- LED Square Recessed Mini Panel
DESIGN & OPTIONS. LED SQUARE RECESSED MINI PANEL has a low-profile, classic design that allows you to have a sleek look with efficient lighting. Smooth dimming capabilities ranging from 100% to 10% with modern LED dimmers. Includes a color adjustable option, you can choose either 3000K, 4000K or 5000K with a simple switch. The 120° beam angle will leave no dark spots on the floor surface. omes in five sizes 3", 4&rdquo, 6", 8", 12" and four finish options WHITE, BLACK, BRONZE and BRUSHED NICKEL. INSTALLATION. This fixture has a J-box and requires only 2" of ceiling space, making the installation process quick and easy. It has everything you need in one set. Just cut out the template, connect the J-box wiring to your light switch, and place it into your ceiling. Spring-loaded clips ensure a snug fit to the surface. This fixture is IC rated so there is no can or any other housing required. Refer to install instructions for detailed steps. APPLICATION. Install the fixture to the ceiling for bright light in your family room, bedroom, hallway, corridor, or any other common area in your living space. It is also suitable for Damp locations, making it perfect for your kitchen or garage as well. You could also use it as a complimentary light to an existing ceiling light. ENERGY SAVINGS & EFFICIENCY. Replacing an incandescent bulb with the LED SQUARE RECESSED MINI PANEL can save you up to 8 times as much on your current energy costs. With a lifespan of 50,000 hours, these fixtures are made to last decades under normal operation! This fixture will save you a significant amount of money in its lifetime. CERTIFICATION & WARRANTY. Buy with confidence ASD provides a 5-year warranty along with ETL and ENERGY STAR certifications to guarantee top quality products and safety! Top US certifications allow participation in rebates please check the rebate programs available in your state.
$
15.48
Qty:
Part #:CUTTP459
- WELDED STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL 514A/514B/514C APPROVAL 1/8 INCH SETBACK VM BRACKET MOUNTING 25 STANDARD PACKAGE 21 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (2) 1/2 INCH SIDE, (1) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 8 KNOCKOUT(S) (1) BOTTOM, (3) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION ARMORED/METAL CLAD CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.00
Qty:
Part #:CUTTP431MSB
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL MSB BRACKET MOUNTING 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (4) 1/2 INCH SIDE, (2) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 11 KNOCKOUT(S) (1) BOTTOM, (6) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION ARMORED/METAL CLAD CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
20.97
Qty:
Part #:CUTTP314
- STEEL MATERIAL 1-1/2 INCH OCTAGON SHAPE UL 514A/514B/514C APPROVAL 4 INCH DIAMETER S BRACKET MOUNTING 50 STANDARD PACKAGE 15.5 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (1) 1/2 INCH SIDE KNOCKOUT SIZE 6 KNOCKOUT(S) (1) BOTTOM, (1) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION ARMORED/METAL CLAD CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
4.13
Qty:
Part #:CUTTP431
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (4) 1/2 INCH SIDE, (2) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 11 KNOCKOUT(S) (1) BOTTOM, (6) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION ARMORED/METAL CLAD CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
5.10
Qty:
Part #:CUTTP440
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (2) 1/2 INCH SIDE, (1) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 8 KNOCKOUT(S) (1) BOTTOM, (3) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION ARMORED/METAL CLAD CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
5.72
Qty:
Part #:CUTTP246
- GANGABLE TYPE STEEL MATERIAL 2 INCH 3 INCH 3-1/2 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL 7/8 INCH SETBACK S BRACKET MOUNTING 25 STANDARD PACKAGE 18 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) 1/2 INCH SIDE, (4) CABLE END, (2) 1/2 INCH END KNOCKOUT SIZE 11 KNOCKOUT(S) (1) BOTTOM, (4) SIDE, (2) END, (4) CABLE END KNOCKOUT LOCATION ARMORED/METAL CLAD CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
5.09
Qty:
Part #:CUTTP106
- NON-GANGABLE TYPE STEEL MATERIAL 2 INCH 3 INCH 1-1/2 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL EAR MOUNTING 50 STANDARD PACKAGE 7.5 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE END KNOCKOUT SIZE 5 KNOCKOUT(S) (1) BOTTOM, (4) CABLE END KNOCKOUT LOCATION ARMORED/METAL CLAD CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.00
Qty:
Displaying: 1 - 24 of 28 Matching Items