Bag of 10
4-11/16 in Square Box
View:
Active Filters :
- Application: 4-11/16 in Square Box Bag of 10 Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To Connects Threadless Rigid/imc to Box or Enclosure Tap Connector / Grounding Connector Used to Offset 3/4" Between Enclosure Runs
$
2.76
Qty:
Part #:CUTTP568
- FLAT TYPE STEEL MATERIAL UL, CSA APPROVAL 25 STANDARD PACKAGE 4-11/16 INCH BOX SIZE BLANK OPENING TYPE
$
0.98
Qty:
Part #:ON034
- THREADED MALE, 3/4 INCH OFFSET TYPE DIE-CAST ZINC MATERIAL RIGID CONDUIT USED ON UL 514B APPROVAL 100 STANDARD PACKAGE 3/4 INCH TRADE SIZE NON-INSULATED THROAT TYPE
$
4.05
Qty:
Part #:ON112
- THREADED MALE, 3/4 INCH OFFSET TYPE DIE-CAST ZINC MATERIAL RIGID CONDUIT USED ON UL 514B APPROVAL 50 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE NON-INSULATED THROAT TYPE
$
8.75
Qty:
Part #:CUTTP576
- RAISED TYPE STEEL MATERIAL UL APPROVAL 25 STANDARD PACKAGE 3.3 CU INCH CAPACITY 4-11/16 INCH BOX SIZE (1) DEVICE OPENING TYPE 1/2 INCH RAISED ROUNDED CORNER TYPE NUMBER OF GANGS 1
$
2.86
Qty:
Part #:CUTTP579
- RAISED TYPE STEEL MATERIAL UL APPROVAL 25 STANDARD PACKAGE 4.3 CU INCH CAPACITY 4-11/16 INCH BOX SIZE (1) DEVICE OPENING TYPE 5/8 INCH RAISED ROUNDED CORNER TYPE NUMBER OF GANGS 1
$
2.95
Qty:
Part #:MTSSCN012
- SET SCREW, THREADLESS TYPE MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 100 STANDARD PACKAGE 1/2 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
3.08
Qty:
Part #:MTSSCN034
- SET SCREW, THREADLESS TYPE MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 100 STANDARD PACKAGE 3/4 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
4.29
Qty:
Part #:MTSSCN100
- SET SCREW, THREADLESS TYPE MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 25 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
6.99
Qty:
Part #:ON200
- THREADED MALE, 3/4 INCH OFFSET TYPE DIE-CAST ZINC MATERIAL RIGID CONDUIT USED ON UL 514B APPROVAL 20 STANDARD PACKAGE 2 INCH TRADE SIZE NON-INSULATED THROAT TYPE
$
8.50
Qty:
Part #:ON012
- THREADED MALE, 3/4 INCH OFFSET TYPE DIE-CAST ZINC MATERIAL RIGID CONDUIT USED ON UL 514B APPROVAL 100 STANDARD PACKAGE 1/2 INCH TRADE SIZE NON-INSULATED THROAT TYPE
$
3.72
Qty:
Part #:ON100
- THREADED MALE, 3/4 INCH OFFSET TYPE DIE-CAST ZINC MATERIAL RIGID CONDUIT USED ON UL 514B APPROVAL 100 STANDARD PACKAGE 1 INCH TRADE SIZE NON-INSULATED THROAT TYPE
$
8.81
Qty:
Part #:ON114
- THREADED MALE, 3/4 INCH OFFSET TYPE DIE-CAST ZINC MATERIAL RIGID CONDUIT USED ON UL 514B APPROVAL 50 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE NON-INSULATED THROAT TYPE
$
6.72
Qty:
Part #:CUTTP587
- RAISED TYPE STEEL MATERIAL UL APPROVAL 25 STANDARD PACKAGE 8 CU INCH CAPACITY 4-11/16 INCH BOX SIZE (2) DEVICE OPENING TYPE 5/8 INCH RAISED NUMBER OF GANGS 2
$
3.65
Qty:
Part #:MTCMCN100
- COMPRESSION, THREADLESS TYPE ZINC PLATED MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 25 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB1
$
6.26
Qty:
Part #:MTCMCN112
- COMPRESSION, THREADLESS TYPE ZINC PLATED MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 10 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB1
$
15.39
Qty:
Part #:MTCMCN200
- COMPRESSION, THREADLESS TYPE ZINC PLATED MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 5 STANDARD PACKAGE 2 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB1
$
30.54
Qty:
Part #:ENY-2M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 3/4 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-9/32 INCH TURNING RADIUS HUBBELL[R] BRAND ENY MODEL
$
29.33
Qty:
Part #:ENY-1M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE THREADED, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 1/2 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-3/16 INCH TURNING RADIUS OVERALL DIMENSION 3-15/16 INCH H ENY MODEL
$
24.98
Qty:
Part #:KLRKENY-3M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 1 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-13/32 INCH TURNING RADIUS HUBBELL[R] BRAND ENY MODEL
$
37.73
Qty:
Part #:KLRKENY-4M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP C D, CLASS I ZONE 1 GROUP IIA IIB, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 1-1/4 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-25/32 INCH TURNING RADIUS HUBBELL[R] BRAND ENY MODEL
$
46.14
Qty:
Part #:KILLENY-5M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE THREADED, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 1-1/2 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-29/32 INCH TURNING RADIUS OVERALL DIMENSION 5-11/16 INCH H ENY MODEL
$
69.40
Qty:
Part #:KILLENY-6M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE THREADED, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 2 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 2-5/16 INCH TURNING RADIUS OVERALL DIMENSION 6-3/8 INCH H ENY MODEL
$
89.98
Qty:
Displaying: 1 - 24 of 27 Matching Items