Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To
Bag of 10
View:
Active Filters :
- Application: Bag of 10 Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To Conduit Flexible/nm Cable
$
2.76
Qty:
![3/8 ROMEX CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN038.jpg)
Part #:RXCN038
- STRAIGHT TYPE DIE-CAST ZINC MATERIAL (2) SCREW INSTALLATION UL 514B APPROVAL 1000 STANDARD PACKAGE 3/8 INCH TRADE SIZE 1/2 INCH KNOCKOUT SIZE (2) 14 AWG, (2) 12 AWG CORD SIZE NON-INSULATED THROAT TYPE NON-METALLIC CABLE SINGLE CABLE OPENING
$
0.33
Qty:
![3/4 NM CABLE CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN034.jpg)
Part #:RXCN034
- ZINC ELECTROPLATED STEEL MATERIAL (2) SCREW TILT-IN INSTALLATION ROMEX/NON-METALLIC CABLE CABLE TYPE (2) OR (3) 8 AWG, 6 AWG, 4 AWG CABLE SIZE 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE 3/4 INCH, 1 INCH KNOCKOUT SIZE NON-INSULATED THROAT TYPE
$
1.28
Qty:
![PVC NM CBL CONN 1 WIRE [Romex Connector, NM-B Connector]](https://southerntierelectricsupply.com/productimage/detail/ARLNM840.jpg)
Part #:ARLNM840
- STRAIGHT TYPE PVC MATERIAL 0.965 INCH OUTER DIAMETER X 1.406 INCH LENGTH SIZE UL, CSA APPROVAL 3/8 INCH THREAD SIZE KNOCKOUT SIZE 1/2
$
0.23
Qty:
Part #:ARLNM841
- STRAIGHT, PUSH-IN TYPE PLASTIC MATERIAL 1.125 INCH DIA X 1.34 INCH L SIZE UL, CSA APPROVAL 1/2 INCH THREAD SIZE PACKAGING QUANTITY 1000 PER PACK
$
0.40
Qty:
Part #:TOP457
- GRAY PLASTIC MATERIAL SNAP-IN INSTALLATION NON-METALLIC CABLE CABLE TYPE (2) 14 AWG OR (2) 12 AWG CABLE SIZE UL APPROVAL 1000 PER CASE STANDARD PACKAGE 1/2 INCH KNOCKOUT SIZE ROHS COMPLIANT SIZE 1 INCH DIA
$
0.29
Qty:
$
1.45
Qty:
Part #:CUTTP432
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (8) 3/4 INCH SIDE KNOCKOUT SIZE 12 KNOCKOUT(S) (4) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
8.09
Qty:
Part #:CUTTP451
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (6) 1/2 INCH SIDE, (3) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (4) BOTTOM, (9) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.75
Qty:
Part #:CUTTP403
- WELDED STEEL MATERIAL 4 INCH 4 WIDTH IN INCH 4 INCH 4 HEIGHT IN INCH 2-1/8 INCH 2.125 DEPTH IN INCH UL 514-A, UL 514-B, UL 514-C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH CONDUIT BOTTOM, (2) (1/2 INCH - 3/4 INCH) CONDUIT ECCENTRIC KNOCKOUT BOTTOM, (8) 1/2 INCH CONDUIT SIDES, (4) (1/2 INCH - 3/4 INCH) CONDUIT ECCENTRIC KNOCKOUT SIDES KNOCKOUT SIZE 16 KNOCKOUT(S) (4) BOTTOM, (12) SIDE KNOCKOUT LOCATION COOPER CROUSE-HINDS. BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION #W-J-800E, NEMA OS-1 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN
$
2.43
Qty:
Part #:CUTTP521
- WELDED STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 44 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (12) (1/2 INCH-3/4 INCH) CONCENTRIC SIDE KNOCKOUT SIZE 16 KNOCKOUT(S) (4) BOTTOM, (12) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
9.40
Qty:
Part #:CUTTP408
- DRAWN STEEL MATERIAL 4 INCH 4 INCH 1-1/4 INCH UL 514A/514B/514C APPROVAL 50 STANDARD PACKAGE 18 CU INCH CAPACITY (5) 1/2 INCH BOTTOM, (12) 1/2 INCH SIDE KNOCKOUT SIZE 17 KNOCKOUT(S) (5) BOTTOM, (12) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
7.26
Qty:
Part #:CUTTP436
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (8) 1 INCH SIDE KNOCKOUT SIZE 12 KNOCKOUT(S) (4) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.04
Qty:
Part #:CUTTP410
- DRAWN TYPE STEEL MATERIAL 4 INCH 1.5 INCH 4 INCH UL APPROVAL 50 STANDARD PACKAGE 22 CUBIC INCH CAPACITY (5) 1/2 INCH BOTTOM, (12) 1/2 INCH SIDE KNOCKOUT SIZE 17 KNOCKOUT(S) (5) BOTTOM, (12) SIDE KNOCKOUT LOCATION APPLICATION CONDUIT
$
2.09
Qty:
Part #:CUTTP414
- DRAWN TYPE STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL APPROVAL 50 PER PACK STANDARD PACKAGE 22 CUBIC INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (8) 1/2 INCH SIDES, (4) 3/4 INCH SIDES KNOCKOUT SIZE 17 KNOCKOUT(S) (5) BOTTOM, (12) SIDES KNOCKOUT LOCATION COOPER CROUSE-HINDS BRAND APPLICATION CONDUIT
$
4.25
Qty:
Part #:CUTTP412
- DRAWN TYPE STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL APPROVAL 50 PER PACK STANDARD PACKAGE 21 CUBIC INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (8) 3/4 INCH SIDES KNOCKOUT SIZE 13 KNOCKOUT(S) (5) BOTTOM, (8) SIDES KNOCKOUT LOCATION COOPER CROUSE-HINDS BRAND APPLICATION CONDUIT
$
2.57
Qty:
Part #:CUTTP434
- DRAWN TYPE STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL APPROVAL 25 PER PACK STANDARD PACKAGE 30.3 CUBIC INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (8) 1/2 INCH SIDES, (4) 3/4 INCH SIDES KNOCKOUT SIZE 17 KNOCKOUT(S) (5) BOTTOM, (12) SIDES KNOCKOUT LOCATION COOPER CROUSE-HINDS BRAND APPLICATION CONDUIT
$
7.45
Qty:
Part #:CUTTP274
- STEEL MATERIAL 1-1/2 INCH OCTAGON SHAPE UL 514A/514B/514C APPROVAL 4 INCH DIAMETER 50 STANDARD PACKAGE 15.5 CU INCH CAPACITY (5) 1/2 INCH CONDUIT BOTTOM, (4) 1/2 INCH CONDUIT SIDE KNOCKOUT SIZE 9 KNOCKOUT(S) (5) BOTTOM, (4) SIDE KNOCKOUT LOCATION NONE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
2.82
Qty:
Part #:CUTTP278
- STEEL MATERIAL 1-1/2 INCH OCTAGON SHAPE UL 514A/514B/514C APPROVAL 4 INCH DIAMETER 50 STANDARD PACKAGE 15.5 CU INCH CAPACITY (3) 1/2 INCH CONDUIT BOTTOM, (2) 3/4 INCH CONDUIT BOTTOM, (2) 1/2 INCH CONDUIT SIDE, (2) 3/4 INCH CONDUIT SIDE KNOCKOUT SIZE 9 KNOCKOUT(S) (5) BOTTOM, (4) SIDE KNOCKOUT LOCATION NONE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
2.29
Qty:
Part #:CUTTP276
- STEEL MATERIAL 1-1/2 INCH OCTAGON SHAPE UL 514A/514B/514C APPROVAL 4 INCH DIAMETER 50 STANDARD PACKAGE 15.5 CU INCH CAPACITY (3) 1/2 INCH CONDUIT BOTTOM, (2) 3/4 INCH CONDUIT BOTTOM, (4) 3/4 INCH CONDUIT SIDE KNOCKOUT SIZE 9 KNOCKOUT(S) (5) BOTTOM, (4) SIDE KNOCKOUT LOCATION NONE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
4.91
Qty:
Part #:CUTTP288
- STEEL MATERIAL 2-1/8 INCH OCTAGON SHAPE UL 514A/514B/514C APPROVAL 4 INCH DIAMETER 25 STANDARD PACKAGE 21.5 CU INCH CAPACITY (3) 1/2 INCH CONDUIT BOTTOM, (2) 3/4 INCH CONDUIT BOTTOM, (4) 1/2 INCH CONDUIT SIDE KNOCKOUT SIZE 9 KNOCKOUT(S) (5) BOTTOM, (4) SIDE KNOCKOUT LOCATION NONE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.22
Qty:
Part #:CUTTP292
- STEEL MATERIAL 2-1/8 INCH OCTAGON SHAPE UL 514A/514B/514C APPROVAL 4 INCH DIAMETER 25 STANDARD PACKAGE 21.5 CU INCH CAPACITY (3) 1/2 INCH CONDUIT BOTTOM, (2) 3/4 INCH CONDUIT BOTTOM, (2) 1/2 INCH CONDUIT SIDE, (2) 3/4 INCH CONDUIT SIDE KNOCKOUT SIZE 9 KNOCKOUT(S) (5) BOTTOM, (4) SIDE KNOCKOUT LOCATION NONE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.43
Qty:
Part #:CUTTP290
- STEEL MATERIAL 2-1/8 INCH OCTAGON SHAPE UL 514A/514B/514C APPROVAL 4 INCH DIAMETER 25 STANDARD PACKAGE 21.5 CU INCH CAPACITY (3) 1/2 INCH CONDUIT BOTTOM, (2) 3/4 INCH CONDUIT BOTTOM, (4) 3/4 INCH CONDUIT SIDE KNOCKOUT SIZE 9 KNOCKOUT(S) (5) BOTTOM, (4) SIDE KNOCKOUT LOCATION NONE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
7.14
Qty:
Part #:CUTTP560
- DRAWN STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 42 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (8) 1 INCH SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (5) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
4.81
Qty:
Displaying: 1 - 24 of 45 Matching Items