Copper Sleeves
Bright Zinc Electroplated Steel
View:
Active Filters :
Part #:BUCH2006S
- ZINC PLATED STEEL MATERIAL (2) #18 MIN. WIRE COMBINATION SIZE (4) #12 MAX. WIRE COMBINATION SIZE 18 TO 10 AWG WIRE SIZE UL 486C, CSA C22.2 APPROVAL 600 VOLT VOLTAGE RATING 100 PER BAG STANDARD PACKAGE COPPER WIRE TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-S-61D
$
17.20
Qty:
Part #:BUCH2011S
- ZINC PLATED STEEL MATERIAL (2) #10 MIN. WIRE COMBINATION SIZE (2) #6 MAX. WIRE COMBINATION SIZE 14 TO 4 AWG WIRE SIZE UL 486C, CSA C22.2 APPROVAL 600 VOLT VOLTAGE RATING 50 PER BAG STANDARD PACKAGE COPPER WIRE TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-S-61D
$
22.65
Qty:
Part #:IDE31-056
- 120 FOOT TAPE LENGTH 1600 POUND TENSILE STRENGTH FULL-PERIMETER HANDLE CASE TYPE CARBON STEEL TAPE MATERIAL 1/8 INCH WIDTH X 0.06 INCH THICKNESS TAPE SIZE 12 INCH REEL DIAMETER BLUED-STEEL[TM], TUFF-GRIP[TM] PRO BRAND TAPE END TYPE FORMED HOOK CONSTRUCTIONAL FEATURE RUST AND CORROSION RESISTANT
$
50.36
Qty:
Part #:MILW2677-23
- Each product within the Milwaukee knockout system was built upon the principles of reducing the tedious steps of hole making, improving the speed of the process, and limiting the fatigue of the user. The M18 Force Logic 6 ton knockout tool carries these benefits forward to service applications. It is powerful enough to punch up to 4 in. holes in 14 gauge mild steel and 40 percent lighter weight. Its compact, right angle design delivers the best clearance in tight spaces. The quick connect alignment system delivers easy set-up without the weight of the tool, and speeds up repetitive punching. The EXACT punches and dies are rated for both mild and stainless steel punching. Vivid red cross hairs aid in accurate alignment, and the gripping surface on punches enables faster threading. The M18 Force Logic 6 ton knockout tool delivers the easiest way to punch. Features Punches up to 6 in. holes in 14 gauge mild steel. Quick connect alignment system. Exact dies feature vivid red cross hairs for clearest alignment. Punches up to 6 in. holes in 14-gauge mild steel 01311
$
1,411.42
Qty:
Part #:G1H012
- 1-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.625 INCH IMC/RIGID CONDUIT USED ON 500 STANDARD PACKAGE 1/2 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.17
Qty:
Part #:E1H012
- 1-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.562 INCH EMT CONDUIT USED ON UL APPROVAL 1000 STANDARD PACKAGE 1/2 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.12
Qty:
Part #:G1H034
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.75 INCH IMC/RIGID CONDUIT USED ON 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.30
Qty:
Part #:G1H100
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.875 INCH IMC/RIGID CONDUIT USED ON 200 STANDARD PACKAGE 1 INCH TRADE SIZE 0.312 INCH HOLE/BOLT SIZE
$
0.45
Qty:
Part #:G1H114
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.875 INCH IMC/RIGID CONDUIT USED ON 100 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE 0.375 INCH HOLE/BOLT SIZE
$
0.68
Qty:
Part #:G1H112
- 1-HOLE, SNAP-ON, RIBBED TYPE 11 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 1 INCH IMC/RIGID CONDUIT USED ON 100 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 0.437 INCH HOLE/BOLT SIZE
$
1.01
Qty:
Part #:G1H200
- 1-HOLE, SNAP-ON, RIBBED TYPE 11 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 1.125 INCH IMC/RIGID CONDUIT USED ON 50 STANDARD PACKAGE 2 INCH TRADE SIZE 0.562 INCH HOLE/BOLT SIZE
$
1.02
Qty:
Part #:E1H100
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.75 INCH EMT CONDUIT USED ON UL APPROVAL 500 STANDARD PACKAGE 1 INCH TRADE SIZE 0.312 INCH HOLE/BOLT SIZE
$
0.27
Qty:
Part #:E1H114
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.875 INCH EMT CONDUIT USED ON 200 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE 0.312 INCH HOLE/BOLT SIZE
$
0.44
Qty:
Part #:E1H112
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 1 INCH EMT CONDUIT USED ON 100 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 0.312 INCH HOLE/BOLT SIZE
$
0.95
Qty:
Part #:E1H200
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 1.125 INCH EMT CONDUIT USED ON 100 STANDARD PACKAGE 2 INCH TRADE SIZE 0.375 INCH HOLE/BOLT SIZE
$
0.95
Qty:
Part #:9B
- CONDUIT HANGER WITH BOLT TYPE 14 GAUGE STEEL MATERIAL BRIGHT ZINC ELECTROPLATED FINISH UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 9 INCH TRADE SIZE 3/8 INCH MOUNTING HOLE SIZE 4 INCH RIGID/EMT CONDUIT TYPE SCREW SIZE 1/4 INCH X 1-1/2 INCH
$
4.90
Qty:
Part #:E1H034
- 1-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.625 INCH EMT CONDUIT USED ON UL APPROVAL 500 STANDARD PACKAGE 3/4 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.16
Qty:
Part #:8B
- CONDUIT HANGER WITH BOLT TYPE 14 GAUGE STEEL MATERIAL BRIGHT ZINC ELECTROPLATED FINISH UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 8 INCH TRADE SIZE 3/8 INCH MOUNTING HOLE SIZE 3-1/2 INCH RIGID/EMT CONDUIT TYPE SCREW SIZE 1/4 INCH X 1-1/2 INCH
$
2.71
Qty:
Part #:IDE31-033
- 50 FOOT TAPE LENGTH 1600 POUND TENSILE STRENGTH FULL-PERIMETER HANDLE CASE TYPE CARBON STEEL TAPE MATERIAL 1/8 INCH WIDTH X 0.06 INCH THICKNESS TAPE SIZE 9 INCH REEL DIAMETER BLUED-STEEL[TM], TUFF-GRIP[TM] PRO BRAND TAPE END TYPE FORMED HOOK CONSTRUCTIONAL FEATURE RUST AND CORROSION RESISTANT
$
35.70
Qty:
Part #:IDE31-057
- 240 FOOT TAPE LENGTH 1600 POUND TENSILE STRENGTH CARBON STEEL TAPE MATERIAL 1/8 INCH WIDTH X 0.06 INCH THICKNESS TAPE SIZE 12 INCH REEL DIAMETER IDEAL BRAND END TYPE FORMED HOOK
$
83.76
Qty:
Displaying: 1 - 20 of 20 Matching Items