Carlon
Brk Electronics
View:
Active Filters :
- Mfr / Trade Name: Brk Electronics Carlon COOPER B-LINE L.H. DOTTIE CO.
Part #:BLINBR-32-4W
- THREADED BRIDLE RING TO WOOD BEAM TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL UL (CANADA AND US) APPROVAL 1/4 INCH MOUNTING SIZE 100 PER BOX STANDARD PACKAGE 50 LB LOAD CAPACITY 2 INCH FITTING SIZE BR MODEL
$
1.59
Qty:
$
10.80
Qty:
Part #:PVCINT400X300
-
IS5545 4"x3" IVL SPACER SUPERDUCT
INTERMEDIATE TYPE NON-METALLIC MATERIAL NON-METALLIC DUCT USED ON NEMA 8/TC2/TC6/TC10 APPLICABLE STANDARD 4 INCH DUCT SIZE 3 INCH DUCT SPACING SNP-LOC[R] BRAND SERIES 5289 MODEL
Qty:
Part #:BRKFG250B
- SMOKE ALARM TYPE DUAL IONIZATION OPERATION TYPE UL 217 APPROVAL 85 DB AT 10 FT HORN TYPE 9 V BATTERY VOLTAGE RATING/SOURCE RED LED INDICATING DC POWER LED/STROBE TYPE BRK[R] BRAND SIZE 4.25 INCH DIA X 1.6 INCH H CARBON ZINC BATTERY FG250 MODEL
$
8.18
Qty:
$
39.46
Qty:
$
57.92
Qty:
Part #:BRK1038510
- 120V LED Strobe Light, ADA Compliant This AC hardwired signaling device is designed to meet the needs to the ADA where a 177 candela strobe light is required for deaf & hard of hearing residential and institutional applications.
» Smart Strobe &ndash Separate flash patterns to distinguish between smoke and carbon monoxide » 177 Candela LED &ndash Powerful LED strobe light provides effective visual warning intended to waken hearing impaired residents » Strobe Signal Synchronization &ndash when multiple units installed, strobes flash in unison » 1Hz Flash Rate &ndash Meets ADA, ANSI 117.1, NFPA 72 and UL STD 1971 » Slim design » 10-Year End-of-Life Timer » 10-Year Limited Warranty
$
70.16
Qty:
Part #:DOTPFP50
- PISTON TYPE DURABLE FOAM MATERIAL 1/2 INCH CONDUIT SIZE PULLING EYES MATERIAL METAL FITS MOST CONDUITS 1/2 TO 6 INCH PFP MODEL
$
4.24
Qty:
Part #:STRUTDEEPGAL14###################
- METAL FRAMING, SINGLE TYPE LOW CARBON STEEL MATERIAL PRE GALVANIZED FINISH 10 FT 1-5/8 INCH 1-5/8 INCH SLOTTED CONFIGURATION 14 GAUGE THICKNESS COLD FORMED PROCESS 1.442 LB/FT WEIGHT 2 INCH CENTER SPACING 1 CHANNEL(S) 9/16 INCH L X 7/8 INCH W HOLE/SLOT SIZE 1.419 INCH DEFLECTION 0.424 SQ INCH CROSS SECTION AREA 276 LB BEAM LOAD RATING 942 LB COLUMN LOAD RATING COLUMN LOAD RATING AT CENTER OF GRAVITY 1236 LB B24SH MODEL
$
231.80
Per Hundred FT
Qty:
Part #:10104SCNKOGRAYN1
- UNFLANGED TYPE STEEL MATERIAL ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 4 INCH UL 50, CSA C22.2, IEC 529 APPROVAL WALL MOUNT MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON COVER TYPE 16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE APPLICATION WIRING BOXES, JUNCTION AND PULL BOXES
$
21.75
Qty:
Part #:10106SCNKOGALVN1
- UNFLANGED TYPE STEEL MATERIAL GALVANIZED, ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 6 INCH UL 50, CSA C22.2, IEC 529 APPROVAL WALL MOUNT MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON COVER TYPE 16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE APPLICATION WIRING BOXES, JUNCTION AND PULL BOXES
$
20.47
Qty:
Part #:12128SCWKOGALVN1
- STEEL MATERIAL ACRYLIC ELECTROCOATED OVER GALVANIZED SURFACE FINISH ANSI 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 12 INCH 12 HEIGHT IN INCH 8 INCH 304.8 HEIGHT IN MM UL 50, CSA 22.2 APPROVAL WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON COVER TYPE 16 GAUGE MATERIAL SPECIFICATION (2) (1/2 INCH - 3/4 INCH) CONDUIT CONCENTRIC KNOCKOUT TOP, (2) (3/4 INCH - 1 INCH) CONDUIT CONCENTRIC KNOCKOUT TOP, (1) (1 INCH - 1 1/4 INCH) CONDUIT CONCENTRIC KNOCKOUT TOP, (2) (1/2 INCH - 3/4 INCH) CONDUIT CONCENTRIC KNOCKOUT BOTTOM, (2) (3/4 INCH - 1 KNOCKOUT SIZE 20 KNOCKOUT(S) (5) TOP, (5) BOTTOM, (10) SIDES KNOCKOUT LOCATION B-LINE. BRAND APPLICABLE STANDARD IEC 529 PANEL NONE HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN
$
53.93
Qty:
Part #:BLINBB8-16
- WALL STUD, SUPPORT TYPE PRE-GALVANIZED FINISH UL (CANADA AND US) APPROVAL SUPPORTS 4 INCH, 4-11/16 INCH BOX/PLASTER RING APPLICATION BOX BRACKET RUFF-IN[TM] BRAND STUD SPACING 16 INCH BB MODEL
$
3.03
Qty:
Part #:SHOOK112
- OPEN END TYPE STEEL MATERIAL ZINC PLATED FINISH 1-1/2 INCH OVERALL LENGTH 7/16 INCH INSIDE DIAMETER 7 GAUGE WIRE DIAMETER OPEN WIDTH 1/4 INCH
$
0.40
Qty:
Part #:STRUTSHALLOWGAL14###############
- METAL FRAMING, SINGLE TYPE LOW CARBON STEEL MATERIAL PRE GALVANIZED ZINC FINISH 10 FT 1-5/8 INCH 13/16 INCH SLOTTED CONFIGURATION 14 GAUGE THICKNESS COLD FORMED PROCESS 0.91 LB/FT WEIGHT 2 INCH CENTER SPACING 1 CHANNEL(S) 7/8 INCH L X 9/16 W HOLE/SLOT SIZE 0.299 SQ INCH CROSS SECTION AREA B-LINE. BRAND STANDARD BUNDLE 500 FT B54 MODEL
$
182.40
Per Hundred FT
Qty:
$
28.43
Qty:
Part #:SBLW12
- SPLIT TYPE SILICON BRONZE MATERIAL 1/2 INCH FASTENER SIZE PC 4015 MODEL
$
113.52
Qty:
Part #:DOTD151
- PHILIPS, SLOTTED, SQUARE, STAR, HEX TYPE 15 PIECE(S) GREEN HANDLE COLOR #0 AND #3, #1 AND #2 PHILLIPS, #0 AND #3, #1 AND #2 SQUARE, T10 AND T15, T20 AND T25 STAR, #4 AND #6 SLOTTED BITS, 1/4 INCH HEX SET CONTENT
$
22.96
Qty:
Part #:TAPCON316X114
- CERAMIC COATED BLUE FINISH 1-1/4 INCH ANCHOR LENGTH 1-1/4 INCH SCREW LENGTH 3/16 INCH SCREW SIZE 5/32 INCH DRILL SIZE SLOTTED HEX HEAD TYPE 3/16 INCH ANCHOR SIZE APPLICATION CONCRETE ANCHORING SYSTEM INCLUDES DRILL
$
0.22
Qty:
Part #:TAPCON316X314
- STEEL MATERIAL CERAMIC COATED BLUE FINISH 1-3/4 INCH ANCHOR LENGTH 5/32 INCH X 3-1/2 INCH DRILL SIZE HEX HEAD TYPE 3/16 INCH DIA ANCHOR SIZE BIT SIZE 1/4 INCH DRIVE TYPE SLOTTED APPLICATION CONCRETE INCLUDES DRILL
$
0.49
Qty:
Part #:TAPCON316X214
- STEEL MATERIAL CERAMIC COATED BLUE FINISH 2-1/4 INCH ANCHOR LENGTH 5/32 INCH X 4-1/2 INCH DRILL SIZE HEX HEAD TYPE 3/16 INCH DIA ANCHOR SIZE BIT SIZE 1/4 INCH DRIVE TYPE SLOTTED APPLICATION CONCRETE INCLUDES DRILL
$
0.32
Qty:
Part #:TAPCON316X234
- STEEL MATERIAL CERAMIC COATED BLUE FINISH 2-3/4 INCH ANCHOR LENGTH 5/32 INCH X 4-1/2 INCH DRILL SIZE HEX HEAD TYPE 3/16 INCH DIA ANCHOR SIZE BIT SIZE 1/4 INCH DRIVE TYPE SLOTTED APPLICATION CONCRETE INCLUDES DRILL
$
0.34
Qty:
Part #:DOTSDS36814
- ROTARY HAMMER TYPE TUNGSTEN CARBIDE TIPPED MATERIAL 8-1/4 INCH OVERALL LENGTH 6 INCH DRILLING LENGTH SDS 4 PLUS SHANK TYPE 6 FLUTE(S) SPIRAL FLUTE TYPE 3/16 INCH DRILL SIZE APPLICATION CONCRETE, MASONRY, BRICK, STONE SDS MODEL
$
10.48
Qty:
Part #:SELFWSAEK
- FLAT WASHER TYPE BOX PACKAGING TYPE (120) #8, (120) #10, (60) 1/4 INCH, (30) 5/16 INCH, (85) 3/8, (6) 1/2 INCH FLAT WASHER SET ITEMS MATERIAL STEEL FINISH ZINC PLATED FW MODEL
$
21.34
Qty:
Displaying: 1 - 24 of 231 Matching Items