ERICO INC.
Brk Electronics
View:
Active Filters :
- Mfr / Trade Name: Brk Electronics ERICO INC. Halo Hammond
closeout
$
19.95
E
Qty:
Part #:LUTRAYCL-153P-WH
- PRESET DIMMER TYPE 2.86 INCH W X 0.23 INCH D X 4.6 INCH H SIZE GLOSS WHITE FINISH SINGLE POLE/THREE WAY OPERATION TYPE UL 1472, CSA C22.2 APPROVAL INDOOR APPLICATION 120 V AT 60 HZ VOLTAGE RATING 150 W (LED/CFL), 600 W (INCANDESCENT) LOAD RATING TOGGLE ON/OFF WITH SLIDER OPERATOR TYPE 1-GANG (NOT INCLUDED) WALL PLATE TYPE INCANDESCENT/HALOGEN, DIMMABLE LED, DIMMABLE CFL LOAD TYPE ARIADNI[R] BRAND TEMPERATURE RATING 32 TO 104 DEG F WARRANTY 1 YEAR LIMITED
$
20.71
Qty:
Part #:BRKFG250B
- SMOKE ALARM TYPE DUAL IONIZATION OPERATION TYPE UL 217 APPROVAL 85 DB AT 10 FT HORN TYPE 9 V BATTERY VOLTAGE RATING/SOURCE RED LED INDICATING DC POWER LED/STROBE TYPE BRK[R] BRAND SIZE 4.25 INCH DIA X 1.6 INCH H CARBON ZINC BATTERY FG250 MODEL
$
8.18
Qty:
$
39.46
Qty:
$
57.92
Qty:
Part #:BRK1038510
- 120V LED Strobe Light, ADA Compliant This AC hardwired signaling device is designed to meet the needs to the ADA where a 177 candela strobe light is required for deaf & hard of hearing residential and institutional applications.
» Smart Strobe &ndash Separate flash patterns to distinguish between smoke and carbon monoxide » 177 Candela LED &ndash Powerful LED strobe light provides effective visual warning intended to waken hearing impaired residents » Strobe Signal Synchronization &ndash when multiple units installed, strobes flash in unison » 1Hz Flash Rate &ndash Meets ADA, ANSI 117.1, NFPA 72 and UL STD 1971 » Slim design » 10-Year End-of-Life Timer » 10-Year Limited Warranty
$
70.16
Qty:
$
14.29
E
Qty:
Part #:CAD812M24SM
- H-MSM CONDUIT SNAP CLOSE CLIP, 360 DEGREE PIVOT TYPE ARMOR SPRING STEEL MATERIAL HAMMER-ON INSTALLATION UL, CUL, UL (CANADA AND US) APPROVAL SIDE MOUNTING 100 STANDARD PACKAGE 1/2 TO 3/4 INCH EMT/RIGID CONDUIT SIZE 25 POUND LOAD CAPACITY 1/8 TO 1/4 INCH BEAM/FLANGE SIZE CADDY[R] BRAND OUTER DIAMETER 0.709 TO 1.181 INCH
$
2.44
Qty:
Part #:CAD812M24
- EM-M CONDUIT SNAP CLOSE CLIP, 360 DEGREE PIVOT TYPE ARMOR SPRING STEEL MATERIAL HAMMER-ON INSTALLATION SIDE MOUNTING 100 STANDARD PACKAGE 1/2 TO 3/4 INCH EMT/RIGID CONDUIT SIZE 75 POUND LOAD CAPACITY 1/8 TO 1/4 INCH BEAM/FLANGE SIZE CADDY[R] BRAND OUTER DIAMETER 0.71 TO 1.181 INCH
$
3.07
Qty:
Part #:CADKX
- CABLE/CONDUIT CLIP TYPE ARMOR SPRING STEEL MATERIAL UL, CUL, UL (CANADA AND US) APPROVAL 100 STANDARD PACKAGE (2) 14 AWG TO (3) 12 AWG (ARMORED/METALLIC CABLE) CONDUIT/CABLE SIZE CADDY[R] BRAND OUTER DIAMETER 0.472 INCH
$
0.90
Qty:
Part #:CADK12
- CABLE/CONDUIT CLIP TYPE CADDY ARMOUR SPRING STEEL MATERIAL UL (CANADA AND US) APPROVAL 100 PER PACK STANDARD PACKAGE 15 POUND (VERTICAL), 100 POUND (HORIZONTAL) LOAD CAPACITY 1/2 TO 3/4 INCH (RIGID/EMT), 1 INCH (EMT) CONDUIT/CABLE SIZE ERICO INTERNATIONAL CORPORATION BRAND OUTER DIAMETER 0.945 INCH
$
0.85
Qty:
Part #:CADCNB812M
- NAIL BRACKET TYPE 100 PER BOX STANDARD PACKAGE 1/2 INCH, 3/4 INCH CONDUIT CONDUIT/CABLE SIZE CADDY. BRAND CNB MODEL
$
2.19
Qty:
Part #:CADMP1S
- 1-GANG TYPE PRE-GALVANIZED STEEL MATERIAL 1/2 TO 5/8 INCH DRYWALL INSTALLATION UL (CANADA AND US) APPROVAL STUD, SCREW-ON, NAIL MOUNTING 25 STANDARD PACKAGE CADDY[R] BRAND OVERALL DIMENSION 4 INCH WIDTH X 4-1/2 INCH HEIGHT MOUNTING HOLE SIZE 0.156 INCH (HOLE 1), 0.187 INCH (HOLE 2)
$
2.52
Qty:
Part #:CADCAT32HP
- J-HOOK, WIDE BASE TYPE PRE-GALVANIZED STEEL MATERIAL UL (CANADA AND US) APPROVAL 50 PER PACK STANDARD PACKAGE 60 POUND LOAD CAPACITY 2 INCH DIAMETER FITTING SIZE ERICO INTERNATIONAL CORPORATION BRAND CABLE CAPACITY 90 (CAT 5E), 60 (CAT 6) AREA 3.97 SQUARE INCH APPLICABLE STANDARD DIN 4102-12, EN 50174-2, IEC 14763-2, TIA 568, TIA 569
$
4.60
Qty:
Part #:CAD4G16
- T-BAR TO ELECTRICAL FIXTURE TYPE CADDY ARMOUR SPRING STEEL MATERIAL ELECTRICAL FIXTURE USED ON TWIST-ON INSTALLATION UL APPROVAL 100 PER PACK STANDARD PACKAGE 50 POUND LOAD CAPACITY 9/16 INCH LENGTH X 1/4 INCH DIAMETER SCREW FASTENER TYPE 15/16 INCH T BAR SIZE ERICO INTERNATIONAL CORPORATION BRAND INCLUDES WING NUT
$
1.82
Qty:
Part #:CAD512
- T-BAR TO ELECTRICAL BOX TYPE PRE-GALVANIZED CADDY ARMOUR SPRING STEEL MATERIAL ELECTRICAL BOX/CONDUIT USED ON SNAP-ON INSTALLATION 50 PER PACK STANDARD PACKAGE 20 POUND LOAD CAPACITY 24 INCH SPAN BOX HANGER FASTENER TYPE ERICO INTERNATIONAL CORPORATION BRAND INCLUDES MOUNTING CLIP AND SCREW
$
14.96
Qty:
Part #:HAMCWJO12
- CONNECTOR TYPE 16/14 GAUGE STEEL MATERIAL ANSI 61 GRAY FINISH 12 INCH 12 INCH UL 50, CUL APPROVAL NEMA 1 ENCLOSURE LAY-IN WIREWAY TYPE ROHS COMPLIANT CWJ MODEL
$
20.62
Qty:
Part #:HAMCWSC824NK
- LAY-IN TYPE 16/14 GAUGE STEEL MATERIAL ANSI 61 GRAY FINISH 24 INCH 8 INCH 8 INCH UL 50, CUL APPROVAL NEMA 1, IP20 ENCLOSURE SCREW COVER TYPE NO KNOCKOUT(S) APPLICATION CONSTRUCTION DESIGNED TO ENSURE ELECTRICAL CONTINUITY AND TO PERMIT FAST AND EASY INDOOR INSTALLATION OF MULTIPLE WIREWAY RUNS APPLICABLE STANDARD IEC 60529 CW MODEL
$
79.88
Qty:
Part #:HAMCWSC836NK
- LAY-IN TYPE 16/14 GAUGE STEEL MATERIAL ANSI 61 GRAY FINISH 36 INCH 8 INCH 8 INCH UL 50, CUL APPROVAL NEMA 1, IP20 ENCLOSURE SCREW COVER TYPE NO KNOCKOUT(S) APPLICATION CONSTRUCTION DESIGNED TO ENSURE ELECTRICAL CONTINUITY AND TO PERMIT FAST AND EASY INDOOR INSTALLATION OF MULTIPLE WIREWAY RUNS APPLICABLE STANDARD IEC 60529 CW MODEL
$
118.49
Qty:
Displaying: 1 - 24 of 45 Matching Items