Brk Electronics
Allied Moled Products
View:
Active Filters :
- Mfr / Trade Name: Allied Moled Products Brk Electronics Gardner-Bender PASS & SEYMOUR
Part #:PASPJSC8I
- THERMOSET MATERIAL SMOOTH FINISH IVORY COLOR (1) DUPLEX RECEPTACLE CONFIGURATION SEMI JUMBO DESIGNATED SIZE CENTER SECTION MOUNTING TYPE SCREW MOUNT APPLICATION COMMERCIAL INDUSTRIAL AND RESIDENTIAL
$
5.02
Qty:
Part #:PASPJSE14I
- THERMOSET MATERIAL SMOOTH FINISH IVORY COLOR (1) BLANK CONFIGURATION SEMI JUMBO DESIGNATED SIZE END SECTION MOUNTING TYPE STRAP MOUNT APPLICATION COMMERCIAL INDUSTRIAL AND RESIDENTIAL
$
5.02
Qty:
Part #:PASPT2095NTLTRW
- DUPLEX TYPE HIGH IMPACT RESISTANT THERMOPLASTIC MATERIAL WHITE COLOR 5-20R CONFIGURATION 3 WIRE(S) SPECIFICATION GRADE UL 498/943 UL (CANADA AND US) CUL CSA C22.2 FSUL WC596 APPROVAL 125 VAC AT 60 HZ VOLTAGE RATING 20 AMPERE CURRENT RATING 2 POLE(S) APPLICABLE STANDARD NEMA WD-1/WD-6 CONSTRUCTIONAL FEATURE TAMPER RESISTANT OVERALL DIMENSION 1.72 INCH W X 1.13 INCH D X 4.2 INCH H TEMPERATURE RATING -35 TO 66 DEG C
$
49.79
Qty:
Part #:BRKFG250B
- SMOKE ALARM TYPE DUAL IONIZATION OPERATION TYPE UL 217 APPROVAL 85 DB AT 10 FT HORN TYPE 9 V BATTERY VOLTAGE RATING/SOURCE RED LED INDICATING DC POWER LED/STROBE TYPE BRK[R] BRAND SIZE 4.25 INCH DIA X 1.6 INCH H CARBON ZINC BATTERY FG250 MODEL
$
8.18
Qty:
$
39.46
Qty:
$
57.92
Qty:
Part #:BRK1038510
- 120V LED Strobe Light, ADA Compliant This AC hardwired signaling device is designed to meet the needs to the ADA where a 177 candela strobe light is required for deaf & hard of hearing residential and institutional applications.
» Smart Strobe &ndash Separate flash patterns to distinguish between smoke and carbon monoxide » 177 Candela LED &ndash Powerful LED strobe light provides effective visual warning intended to waken hearing impaired residents » Strobe Signal Synchronization &ndash when multiple units installed, strobes flash in unison » 1Hz Flash Rate &ndash Meets ADA, ANSI 117.1, NFPA 72 and UL STD 1971 » Slim design » 10-Year End-of-Life Timer » 10-Year Limited Warranty
$
70.16
Qty:
Part #:G-BGSW-120
- BAT HANDLE TYPE 0.57 INCH W X 1.13 INCH H SIZE 0.65 INCH TOGGLE LENGTH SPDT CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF/MAINTAINED ON OPERATION TYPE UL, CSA APPROVAL FOOD SERVICE EQUIPMENT, INDUSTRIAL EQUIPMENT APPLICATION 125/277 VAC VOLTAGE RATING 0.47 INCH-32 TPI X 0.5 INCH L BUSHING MOUNTING 20 AMPERE AT 125 VAC, 10 AMPERE AT 277 VAC CURRENT RATING BLACK PHENOLIC PLASTIC BODY MATERIAL SPADE TERMINAL TYPE BRASS/BRIGHT NICKEL TOGGLE MATERIAL GB[R] BRAND POWER RATING 3/4 HP AT 125 TO 250 VAC ZINC CHROMATED STEEL FRAME, SUPPORT GSW MODEL
$
4.60
CG
Qty:
Part #:PASTP8I
- 0.07 INCH THK NYLON MATERIAL IVORY COLOR (1) DUPLEX RECEPTACLE CONFIGURATION 1 GANG(S) STANDARD DESIGNATED SIZE
$
41.25
Qty:
Part #:PAS664IG
- TOGGLE TYPE THERMOPLASTIC (TOGGLE/FRAME) MATERIAL 1.25 INCH W X 1.09 INCH D X 4.195 INCH H SIZE IVORY COLOR FOUR WAY OPERATION TYPE UL 20 CSA C22.2 APPROVAL 120 VAC VOLTAGE RATING 15 AMPERE CURRENT RATING PUSH SIDE WIRING NO WALL PLATE INCLUDED GROUNDING TYPE GROUNDING APPLICABLE STANDARD NEMA WD-1/WD-6 664 MODEL
$
1,155.00
Qty:
Part #:PASCR20
- DUPLEX TYPE THERMOPLASTIC (BACK BODY) NYLON (FACE) MATERIAL BROWN COLOR 5-20R CONFIGURATION 3 WIRE(S) COMMERCIAL GRADE UL 498 CSA C22.2 APPROVAL 125 VAC VOLTAGE RATING 20 AMPERE CURRENT RATING AUTOMATIC GROUNDING 2 POLE(S) CORROSION RESISTANT IMPACT RESISTANT SIDE WIRING APPLICABLE STANDARD NEMA WD-1/WD-6 OVERALL DIMENSION 1.322 INCH W X 0.78 INCH D X 3.281 INCH H TEMPERATURE RATING -40 TO 50 DEG C CR MODEL
$
2.00
Qty:
Part #:PAS3232
- DUPLEX TYPE THERMOPLASTIC MATERIAL BROWN COLOR 5-15R CONFIGURATION 3 WIRE(S) UL 498 CSA C22.2 APPROVAL 125 VAC VOLTAGE RATING 15 AMPERE CURRENT RATING GROUNDING 2 POLE(S) IMPACT RESISTANT PUSH SIDE WIRING APPLICABLE STANDARD NEMA WD-1/WD-6 OVERALL DIMENSION 1.32 INCH W X 0.96 INCH D X 3.31 INCH H 3232 MODEL
$
75.38
Qty:
Part #:PASP122R
- DURABLE IMPACT RESISTANT THERMOPLASTIC MATERIAL 2-1/4 INCH 3-3/4 INCH 3-3/8 INCH 1 GANG(S) UL APPROVAL CAPTIVE NAIL MOUNTING 100 STANDARD PACKAGE 22.5 CU INCH CAPACITY (4) QUICK ENTRIES CABLE ENTRY THREADED DEVICE MOUNTING HOLE
$
86.25
Qty:
Part #:PAS660BKG
- TOGGLE TYPE THERMOPLASTIC (TOGGLE/FRAME) MATERIAL 1.25 INCH W X 1.09 INCH D X 4.195 INCH H SIZE BLACK COLOR SINGLE POLE OPERATION TYPE UL 20 UL (CANADA AND US) CSA C22.2 APPROVAL 120 VAC VOLTAGE RATING 15 AMPERE CURRENT RATING PUSH SIDE WIRING NO WALL PLATE INCLUDED GROUNDING TYPE GROUNDING APPLICABLE STANDARD NEMA WD-1/WD-6 660 MODEL
$
102.38
Qty:
Part #:ALM9313-EWK
- OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 5-15/16 INCH 3-1/4 INCH 2-7/8 INCH 3 GANG(S) UL 514C APPROVAL (4) EARS, WING BRACKET MOUNTING 25 STANDARD PACKAGE 42.5 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN 9313-EW MODEL
$
5.76
Qty:
Part #:ALM9331-ESK
- OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2-3/8 INCH 3-1/4 INCH 2-1/2 INCH 1 GANG(S) UL 514C APPROVAL (2) EARS, SNAP BRACKET MOUNTING 50 STANDARD PACKAGE 14 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN 9331-ES MODEL
$
2.06
Qty:
Part #:ALM9342-HN
- MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 4 INCH 4 INCH 2-1/4 INCH UL 514C APPROVAL (2) NAIL, HN HANGER MOUNTING 50 STANDARD PACKAGE 27.3 CU INCH CAPACITY (2) WIRE CLAMPS CABLE ENTRY FIBERGLASSBOX[TM] BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (WIRE CLAMP/BRACKET), ZINC PLATED STEEL (SCREW) USED ON NON-METALLIC SHEATHED CABLE
$
3.05
Qty:
Part #:ALM9343-NK
- MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 4-1/16 INCH 4-1/16 INCH 2-1/2 INCH UL 514C APPROVAL (2) NAILS MOUNTING 50 STANDARD PACKAGE 32.3 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY FIBERGLASSBOX[TM] BRAND COLOR BEIGE/TAN MATERIAL PLATED CARBON STEEL (NAIL), ZINC PLATED STEEL (SCREW), PVC (SPEED CLAMP) USED ON NON-METALLIC SHEATHED CABLE
$
4.16
Qty:
$
1.99
Qty:
Part #:ALM9361-ESK
- OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2-3/8 INCH 3-1/4 INCH 2-7/8 INCH 1 GANG(S) UL 514C APPROVAL (2) EARS, SNAP BRACKET MOUNTING 50 STANDARD PACKAGE 16 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN 9361-ES MODEL
$
3.27
Qty:
Part #:ALM9363-EWK
- GANGABLE, WALL, OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2-3/8 INCH 3-1/4 INCH 2-27/32 INCH 1 GANG(S) UL 514C APPROVAL (2) EARS, WING BRACKET MOUNTING 100 STANDARD PACKAGE 16 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (EAR/WING), ZINC COATED STEEL (WING SCREW) USED ON NON-METALLIC SHEATHED CABLE APPLICATION RESIDENTIAL 9363-EW MODEL
$
2.81
Qty:
Part #:ALM2302-NK
- GANGABLE, WALL, NEW WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 4 INCH 3-3/4 INCH 3-7/16 INCH 2 GANG(S) UL 514C APPROVAL (2) ANGLED MID NAILS MOUNTING 50 STANDARD PACKAGE 37 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL PLATED CARBON STEEL (NAIL), PVC (SPEED CLAMP) APPLICATION RESIDENTIAL 2302-NK MODEL
$
3.08
Qty:
Part #:ALM3303-NK
- GANGABLE, WALL, NEW WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 5-11/16 INCH 3-3/4 INCH 3-9/16 INCH 3 GANG(S) UL 514C APPROVAL (2) ANGLED MID NAILS MOUNTING 20 STANDARD PACKAGE 56.5 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL PLATED CARBON STEEL (NAIL), PVC (SPEED CLAMP) USED ON NON-METALLIC SHEATHED CABLE APPLICATION RESIDENTIAL 3303-NK MODEL
$
4.31
Qty:
Displaying: 1 - 24 of 346 Matching Items