Hammond Manufacturing
Brk Electronics


Displaying: 1 - 24 of 270 Matching Items
270 Items
View:
Active Filters :
$ 10.80
Qty:
add to cart
Part #:BRKFG250B
SMOKE ALARM TYPE DUAL IONIZATION OPERATION TYPE UL 217 APPROVAL 85 DB AT 10 FT HORN TYPE 9 V BATTERY VOLTAGE RATING/SOURCE RED LED INDICATING DC POWER LED/STROBE TYPE BRK[R] BRAND SIZE 4.25 INCH DIA X 1.6 INCH H CARBON ZINC BATTERY FG250 MODEL
$ 8.18
Qty:
add to cart
Part #:BRK1038510
120V LED Strobe Light, ADA Compliant This AC hardwired signaling device is designed to meet the needs to the ADA where a 177 candela strobe light is required for deaf &amp hard of hearing residential and institutional applications. &raquo Smart Strobe &ndash Separate flash patterns to distinguish between smoke and carbon monoxide &raquo 177 Candela LED &ndash Powerful LED strobe light provides effective visual warning intended to waken hearing impaired residents &raquo Strobe Signal Synchronization &ndash when multiple units installed, strobes flash in unison &raquo 1Hz Flash Rate &ndash Meets ADA, ANSI 117.1, NFPA 72 and UL STD 1971 &raquo Slim design &raquo 10-Year End-of-Life Timer &raquo 10-Year Limited Warranty
$ 70.16
Qty:
add to cart
Part #:BRK9120B
120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money. &raquo Single button test/silence &raquo 9V Battery Backup &raquo Latching alarm indicator - remembers which unit initiated an alarm &raquo Smart Technology - helps reduce the number of nuisance alarms &raquo Perfect Mount - allows for easy alignment of alarm &raquo Dust Cover &raquo Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. &raquo 10-Year Limited Warranty
$ 10.73
Qty:
add to cart
Part #:BRKSC9120B
120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements. &raquo 10YR CO Sensor/10YR End of Life &raquo Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies &raquo 9V Alkaline Battery Backup &raquo Latching alarm indicator - remembers which unit initiated an alarm &raquo Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm &raquo End of Life Signal provides audible notification alarms needs to be replaced &raquo Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms &raquo Perfect Mount - allows for easy alignment of alarm &raquo Dust Cover &raquo Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. &raquo Single button test/silence &raquo 10-Year Limited Warranty
$ 44.25
Qty:
add to cart
Part #:DOTPFP50
PISTON TYPE DURABLE FOAM MATERIAL 1/2 INCH CONDUIT SIZE PULLING EYES MATERIAL METAL FITS MOST CONDUITS 1/2 TO 6 INCH PFP MODEL
$ 4.24
Qty:
add to cart
Part #:HAM18126
FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 6 INCH 6 DEPTH IN INCH 457.2 HEIGHT IN MM 304.8 WIDTH IN MM UL 50, CUL APPROVAL 152.4 DEPTH IN MM WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON, LIFT OFF COVER TYPE 16/14/12 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$ 50.54
Qty:
add to cart
$ 16.97
Qty:
add to cart
Part #:HAMCS10106
FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$ 29.97
Qty:
add to cart
$ 9.32
Qty:
add to cart
Part #:HAMC3R12126HCR
NEMA 3R ENCLOSURE USED ON HINGE INSTALLATION NEMA 3R ENCLOSURE HAMMOND MANUFACTURING[T] BRAND
$ 113.56
Qty:
add to cart
Part #:HAMCS18124
FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 4 INCH 4 DEPTH IN INCH 457.2 HEIGHT IN MM 304.8 WIDTH IN MM UL 50, CUL APPROVAL 101.6 DEPTH IN MM WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON, LIFT OFF COVER TYPE 16/14/12 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$ 47.58
Qty:
add to cart
$ 29.67
Qty:
add to cart
$ 19.84
Qty:
add to cart
Part #:HAMCS12126
FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 12 INCH 12 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$ 38.49
Qty:
add to cart
Part #:HAMC3R18186SC
UNFLANGED TYPE FORMED SPOT WELDED STEEL MATERIAL GALVANIZED, POWDER COATED FINISH ANSI/ASA 61 GRAY COLOR 18 INCH 18 WIDTH IN INCH 18 INCH 18 HEIGHT IN INCH 6 INCH 6 DEPTH IN INCH 457.2 HEIGHT IN MM 457.2 WIDTH IN MM UL 50, CSA APPROVAL 152.4 DEPTH IN MM WALL MOUNTING NEMA 3R, IP32 ENCLOSURE SLIP ON WITH SCREW, PADLOCKABLE HASP COVER TYPE 16/14 GAUGE MATERIAL SPECIFICATION (4) (0.875 INCH-1.125 INCH), (5) (1.125 INCH-1.375 INCH) CONCENTRIC KNOCKOUT KNOCKOUT SIZE 9 KNOCKOUT(S) BOTTOM KNOCKOUT LOCATION HAMMOND MANUFACTURING[T] BRAND DEPTH IN INCH - UOM IN DEPTH IN MM - UOM MM HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN WIDTH IN MM - UOM MM
$ 136.08
Qty:
add to cart
Part #:HAMCS18186
FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 18 INCH 18 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$ 67.54
Qty:
add to cart
Part #:HAMCS24248
FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 24 INCH 24 INCH 8 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$ 169.20
Qty:
add to cart
Part #:SHOOK112
OPEN END TYPE STEEL MATERIAL ZINC PLATED FINISH 1-1/2 INCH OVERALL LENGTH 7/16 INCH INSIDE DIAMETER 7 GAUGE WIRE DIAMETER OPEN WIDTH 1/4 INCH
$ 0.40
Qty:
add to cart
Part #:HAMC3RWT436
14/16 GAUGE GALVANIZED STEEL MATERIAL ANSI 61 GRAY POWDER COATED FINISH 36 INCH 4 INCH 4 INCH UL 870, CSA APPROVAL NEMA 3R, IP24 ENCLOSURE PADLOCKABLE, SCREW, SLIP-ON COVER TYPE WIRING TROUGH ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION PROTECT MULTIPLE WIRING JUNCTIONS IN OUTDOOR ENVIRONMENTS AGAINST THE INGRESS OF RAIN, SLEET, SNOW AND THE EXTERNAL FORMATION OF ICE C3RWT MODEL
$ 88.27
Qty:
add to cart
Part #:HAMC3RWT448
14/16 GAUGE GALVANIZED STEEL MATERIAL ANSI 61 GRAY POWDER COATED FINISH 48 INCH 4 INCH 4 INCH UL 870, CSA APPROVAL NEMA 3R, IP24 ENCLOSURE PADLOCKABLE, SCREW, SLIP-ON COVER TYPE WIRING TROUGH ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION PROTECT MULTIPLE WIRING JUNCTIONS IN OUTDOOR ENVIRONMENTS AGAINST THE INGRESS OF RAIN, SLEET, SNOW AND THE EXTERNAL FORMATION OF ICE C3RWT MODEL
$ 111.69
Qty:
add to cart
$ 4.27
Qty:
add to cart
 
Displaying: 1 - 24 of 270 Matching Items