Ceiling
C Bracket
View:
Active Filters :
Sold Out
Part #:RABPS4-11-20D2
- SQUARE STRAIGHT TYPE 20 FT NOMINAL MOUNTING HEIGH UL (CANADA AND US), CSA APPROVAL WET LOCATION APPLICATION 3/4 INCH DIA X 17 INCH L X 3 INCH THD BOLT SIZE STEEL SHAFT MATERIAL 8-1/2 INCH BOLT CIRCLE DIAMETER 2 FIXTURE(S) DRILL FIXTURE MOUNTING TYPE 3 INCH W X 5 INCH H HAND HOLE TYPE 240 LB AT 70 MPH, 165 LB AT 80 MPH, 75 LB AT 100 MPH, 110 LB AT 90 MPH, 45 LB AT 110 MPH, 20 LB AT 120 MPH ARM CAPACITY 8.3 SQ FT AT 70 MPH, 5.6 SQ FT AT 80 MPH, 3.6 SQ FT AT 90 MPH, 2.2 SQ FT AT 100 MPH, 1 SQ FT AT 110 MPH, 0.2 SQ FT AT 120 MPH EFFECTIVE PROJECTED AREA SQUARE BASE SHAFT MOUNTING TYPE 4 INCH SHAFT BOTTOM SIZE BRONZE SHAFT COLOR POLYESTER POWDER COATED SHAFT FINISH 4 INCH SHAFT TOP SIZE 1/8 INCH SHAFT WALL THICKNESS 70/80/90/100/110/120 MPH WIND LOAD RATING 8 INCH L X 8 INCH W X 3/4 INCH THK MOUNTING BASE SIZE INCLUDES GALVANIZED ANCHOR BOLT, GALVANIZED HARDWARE, ANCHOR BOLT TEMPLATE PS4 MODEL
$
895.67
Qty:
Part #:RABFFLED39W
- 11 INCH W X 7-1/2 INCH D X 10 INCH H SIZE CHIP AND FADE RESISTANT WHITE POLYESTER POWDER COATED FINISH UL, UL (CANADA AND US) APPROVAL 1/2 INCH THREADED ARM, O-RING, STAINLESS STEEL SCREW MOUNTING IP65 ENCLOSURE LED LAMP TYPE (1) 13 W, (1) 26 W LAMP WATTAGE PRECISION DIE-CAST ALUMINUM HOUSING MATERIAL 100 TO 277 VAC AT 50/60 HZ LAMP/BALLAST VOLTAGE NEMA 7 X 6 DISTRIBUTION/BEAM SPREAD 0.65 SQ FT EPA LFLOOD[R] BRAND APPLICATION WET LOCATION INITIAL INTENSITY 4596 LUMEN COLOR RENDERING INDEX 65 COLOR TEMPERATURE IN KELVIN 5000 (COOL) DRIVER INPUT WATTAGE 41 W REFLECTOR ANODIZED SEMI SPECULAR ALUMINUM WITH BUTTON PHOTOCELL WIRED FOR 120 V FFLED MODEL
$
250.16
Qty:
Part #:RABLFLED5YW
*LIMITED SUPPLY*
- 2-3/8 INCH DIA X 6 INCH L SIZE CHIP AND FADE RESISTANT WHITE POLYESTER POWDER COATED FINISH UL, UL (CANADA AND US) APPROVAL ARM MOUNTING LED LAMP TYPE 5 W LAMP WATTAGE PRECISION DIE-CAST ALUMINUM HOUSING MATERIAL 100 TO 240 VAC AT 50/60 HZ LAMP/BALLAST VOLTAGE NEMA 4 X 4, 44 DEGREE DISTRIBUTION/BEAM SPREAD LFLOOD[R] BRAND ROHS COMPLIANT APPLICATION WET LOCATION INITIAL INTENSITY 208 LUMEN COLOR RENDERING INDEX 86 COLOR TEMPERATURE IN KELVIN 3000 (WARM) DRIVER INPUT WATTAGE 5 W LENS MATERIAL MICROPRISMATIC DIFFUSION LFLED MODEL
Sold Out
$
380.11
Qty:
Part #:RABHNLED26A
- 5-1/2 INCH DIA X 9-1/4 INCH D SIZE BRONZE POLYESTER POWDER COATED FINISH UL APPROVAL ARM, O-RING, STAINLESS STEEL SCREW MOUNTING LED LAMP TYPE 26 W LAMP WATTAGE DIE-CAST ALUMINUM HOUSING MATERIAL 120/208/240/277 V AT 50/60 HZ LAMP/BALLAST VOLTAGE NEMA 2 X 2 HORIZONTAL/VERTICAL DISTRIBUTION/BEAM SPREAD ROHS COMPLIANT DRIVER INPUT POWER 27 W LAMP INTENSITY 2272 LUMEN COLOR RENDERING INDEX 67 COLOR TEMPERATURE 5000 K LAMP LIFE 100000 HR GASKET MATERIAL HIGH TEMPERATURE SILICONE REFLECTOR MATERIAL SEMI-SPECULAR VACUUM-METALIZED POLYCARBONATE AMBIEN
$
379.98
Qty:
$
345.00
Qty:
$
95.63
Qty:
Part #:KIDI4618A
- The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
The front-loading battery door allows user to change the battery without removing the alarm from the mounting bracket making battery replacement easy and convenient. This smoke alarm is available in a 6-piece cut case with tray for easy display as well as a 6-piece bulk pack for contractors and property owners. This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Easy Installation
&bull Front battery pull tab allows battery activation without removing alarm from mounting bracket.
&bull Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
&bull Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
Fewer Callbacks
&bull Large centrally located Test/Hush® alarm control button.
&bull Dust cover protects sensor from contaminates during construction reducing nuisance alarms.
User-Friendly Features
&bull Easy access front loading battery door.
&bull Battery backup provides protection in case of power failure.
&bull Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user&rsquos guide for complete instructions.
Technical Specifications
Model
i4618
UPC
0-47871-07581-2
Power Source
120VAC (80mA Max)
Sensor
Ionization
Audio Alarm
85dB at 10ft
Temperature Range
40°F (4.4°C) to 100°F (37.8°C)
Humidity Range
Up to 85% relative humidity (RH)
Size
5.6 in diameter x 1.8 in depth
Weight
.5lbs
Interconnects
Up to 24 Kidde devices
LED
Green, receiving ac power,Red, 4 modes of operation
Warranty
5 year limited
$
12.77
Qty:
Part #:I12040
- SMOKE ALARM WITH STROBE LIGHT TYPE AC/DC IONIZATION OPERATION TYPE UL APPROVAL 85 DB AT 10 FT HORN TYPE 120 VAC 60 HZ WITH 9 V BATTERY BACKUP VOLTAGE RATING/SOURCE LED INDICATING CONDITION LED/STROBE TYPE 24 INTERCONNECTION(S) SIZE 6.5 INCH W X 13.25 INCH D X 6 INCH H
$
23.04
Qty:
Part #:CUTTP302
- STEEL MATERIAL 1-1/2 INCH OCTAGON SHAPE UL 514A/514B/514C APPROVAL 4 INCH DIAMETER C BRACKET MOUNTING 50 STANDARD PACKAGE 15.5 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (2) 1/2 INCH SIDE KNOCKOUT SIZE 7 KNOCKOUT(S) (1) BOTTOM, (2) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
4.50
Qty:
Part #:CUTTP318
- STEEL MATERIAL 2-1/8 INCH OCTAGON SHAPE UL 514A/514B/514C APPROVAL 4 INCH DIAMETER C BRACKET MOUNTING 25 STANDARD PACKAGE 21.5 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (2) 1/2 INCH SIDE KNOCKOUT SIZE 7 KNOCKOUT(S) (1) BOTTOM, (2) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
6.44
Qty:
Part #:BLINB2208PAZN
- ZINC ELECTROPLATED FINISH 400 LB VERTICAL, 50 LB TRANSVERSE, 50 LB LONGITUDINAL LOAD RATING CHANNEL MOUNTING TYPE ASTM A570 33 LOW CARBON STEEL CLAMP MATERIAL B-LINE. BRAND WEIGHT 11 LB PER 100 PIECES ITEMS/FEATURES SLOTTED HEX HEAD MACHINE SCREW, SQUARE NUT, PRE ASSEMBLED PIPE CLAMP MATERIAL THICKNESS 16 GAUGE SAFETY FACTOR 5 NOMINAL PIPE SIZE 1/2 INCH NOMINAL PIPE SIZE - DECIMAL .5 NOMINAL PIPE SIZE - FRACTIONAL 1/2 NUMBER OF BOLTS 1 B2208 MODEL
$
3.07
Qty:
Displaying: 1 - 13 of 13 Matching Items