M18 Fuel
C3rwt Series
View:
Active Filters :
- Sub Brand: C3rwt Series M18 Fuel M18 Scotch
Part #:MILW2853-20
- The M18 FUEL 1/4 in. impact driver is the fastest, most compact, and most powerful tool in its class. The POWERSTATE brushless motor delivers up to 2,000in-lbs of torque and up to 30 percent faster driving speed, increasing users productivity for the most demanding fasteners on the job. With the most compact tool at only 4.59 in. in length, users will have more access in tight spaces. The REDLINK Plus intelligence ensures maximum performance and protects from overloads, heating or over-discharge. The REDLITHIUM battery pack (not included) delivers more work per charger and more work over the life of the pack than competitors. The 4-mode DRIVE CONTROL provides greater control over output speed and power for greater versatility. Self-tapping screw mode provides faster installation time by reducing stripping of fasteners. 14427
$
144.00
Qty:
Part #:MILW2737-20
- The M18 FUEL D-handle jig saw combines power, blade speed and precision, to provide the highest quality cuts in a wide variety of materials. The M18 FUEL D-handle jig saw leverages the POWERSTATE brushless motor and REDLINK Plus intelligence to provide higher blade speed than corded jig saws at 3500 strokes per minute for clean controlled cuts with minimized chipping or bucking. Leveraging the M18 REDLITHIUM XC5.0 battery the M18 FUEL D-handle jig saw provides up to 105 linear feet of cutting in 3/4 in. laminated particle board, delivering all day productivity with less trips to the charger. The saw features tool-less blade change, tool free bevel adjust with pin-detents at 0. 15. 30. and 45 as well as an LED light and on/off blower to keep the cut line visible while cutting. 15189
$
187.06
Qty:
Part #:MILW2737B-20
- The M18 FUEL barrel grip jig saw combines power, blade speed and precision, to provide the highest quality cuts in a wide variety of materials. The M18 FUEL D-handle jig saw leverages the POWERSTATE brushless motor and REDLINK Plus intelligence to provide higher blade speed than corded jig saws at 3500 strokes per minute for clean controlled cuts with minimized chipping or bucking. Leveraging the M18 REDLITHIUM XC5.0 battery the M18 FUEL D-handle jig saw provides up to 105 linear feet of cutting in 3/4 in. laminated particle board, delivering all day productivity with less trips to the charger. The saw features tool-less blade change, tool free bevel adjust with pin-detents at 0. 15. 30. and 45 as well as an LED light and on/off blower to keep the cut line visible while cutting. 15363
$
187.06
Qty:
Part #:MILW2648-20
- The M18 5 in. random orbit sander delivers corded power with 12,000 max OPM output. The 7,000-12,000 variable speed dial allows the user more control over the output of the tool to match the orbit speed for the application. The tools powerful motor allows the user to remove more material per battery charge. The M18 random orbit sander powered by REDLITHIUM battery technology delivers up to 35 minutes of run-time on a M18 3.0 Ah battery pack. 20961
Qty:
Part #:MILW2893-22
- The 2893 - 22 M18 2-tool Combo kit includes the 1/2 in. brushless hammer drill driver (2902-20) and the 1/4 in. hex compact brushless 3-speed impact driver (2851-20). The M18 cordless system's patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. The M18 1/2 in. brushless hammer drill/driver is the most powerful drill in its class at 725 in-lbs of torque. The M18 1/4 in. hex compact brushless impact driver has the fastest application speed its class and delivers 1,600 in-lbs of torque. The 2851 also includes 3-mode drive control allowing unmatched control. Both tools feature Milwaukee built brushless motors, REDLINK electronics, and REDLITHIUM batteries that provide more efficient power delivery, for fewer trips to the charger. 27892
$
340.60
Qty:
Part #:MILW2631-20
- The M18 brushless 7-1/4 in. circular saw delivers up to 40 percent more power than circular saws with brushed motors while providing up to 30 percent more run-time as well. The Milwaukee built motor, REDLINK electronics and REDLITHIUM XC5.0 battery provide more efficient power delivery, more power and fewer trips to the charger. With 5,000 RPM that 2631 provides smooth cutting and at only 9.0 lbs. it is lighter than most corded saws. The saw also features an integrated rafter hook, magnesium guards, an aluminum shoe and LED light. 30250
$
192.24
Qty:
Part #:MILW2767-22GG
- The M18 FUEL high torque impact wrench with friction ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000 ft./lbs. of fastening torque and 1400 ft./lbs. of nut-busting torque. With 2X faster removal speed, users will be able to get the job done faster and be more productive throughout their day. By providing the industry's most compact cordless high torque impact wrench at 8.39 in. L, this tool allows for more access in tight spaces. 4-Mode drive control with bolt removal mode gives users the most control over their fasteners. Bolt removal mode gives the user more control when removing fasteners by slowing to 750 RPM once the fastener has been busted loose. This tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber over mold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials. 32292
$
639.00
Qty:
Part #:MILW48-11-1865
- The M18 REDLITHIUM HIGH OUTPUT XC6.0 battery pack provides 50 percent more power and runs 50 percent cooler vs M18 REDLITHIUM XC battery packs. The optimized combination of size and increased power provides a great solution for the entire range of M18 products. It delivers fade free power and runs substantially cooler through heavy applications, allowing tradesmen to push their cordless tools harder and longer than ever before. The M18 REDLITHIUM HIGH OUTPUT XC6.0 provides increased power in extreme cold weather conditions (below 0F / -18C) and delivers more work per charge, driving corded replacement on the jobsite. The REDLITHIUM HIGH OUTPUT XC6.0 battery is fully compatible with 150+ M18 solutions. 33381
$
175.20
Qty:
Part #:HAMC3RWT436
- 14/16 GAUGE GALVANIZED STEEL MATERIAL ANSI 61 GRAY POWDER COATED FINISH 36 INCH 4 INCH 4 INCH UL 870, CSA APPROVAL NEMA 3R, IP24 ENCLOSURE PADLOCKABLE, SCREW, SLIP-ON COVER TYPE WIRING TROUGH ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION PROTECT MULTIPLE WIRING JUNCTIONS IN OUTDOOR ENVIRONMENTS AGAINST THE INGRESS OF RAIN, SLEET, SNOW AND THE EXTERNAL FORMATION OF ICE C3RWT MODEL
$
88.27
Qty:
Part #:HAMC3RWT448
- 14/16 GAUGE GALVANIZED STEEL MATERIAL ANSI 61 GRAY POWDER COATED FINISH 48 INCH 4 INCH 4 INCH UL 870, CSA APPROVAL NEMA 3R, IP24 ENCLOSURE PADLOCKABLE, SCREW, SLIP-ON COVER TYPE WIRING TROUGH ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION PROTECT MULTIPLE WIRING JUNCTIONS IN OUTDOOR ENVIRONMENTS AGAINST THE INGRESS OF RAIN, SLEET, SNOW AND THE EXTERNAL FORMATION OF ICE C3RWT MODEL
$
111.69
Qty:
Part #:HAMC3RWT624
- 14/16 GAUGE GALVANIZED STEEL MATERIAL ANSI 61 GRAY POWDER COATED FINISH 24 INCH 6 INCH 6 INCH UL 870, CSA APPROVAL NEMA 3R, IP24 ENCLOSURE PADLOCKABLE, SCREW, SLIP-ON COVER TYPE WIRING TROUGH ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION PROTECT MULTIPLE WIRING JUNCTIONS IN OUTDOOR ENVIRONMENTS AGAINST THE INGRESS OF RAIN, SLEET, SNOW AND THE EXTERNAL FORMATION OF ICE C3RWT MODEL
$
83.38
Qty:
Part #:HAMC3RWT636
- 14/16 GAUGE GALVANIZED STEEL MATERIAL ANSI 61 GRAY POWDER COATED FINISH 36 INCH 6 INCH 6 INCH UL 870, CSA APPROVAL NEMA 3R, IP24 ENCLOSURE PADLOCKABLE, SCREW, SLIP-ON COVER TYPE WIRING TROUGH ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION PROTECT MULTIPLE WIRING JUNCTIONS IN OUTDOOR ENVIRONMENTS AGAINST THE INGRESS OF RAIN, SLEET, SNOW AND THE EXTERNAL FORMATION OF ICE C3RWT MODEL
$
113.56
Qty:
Part #:HAMC3RWT648
- 14/16 GAUGE GALVANIZED STEEL MATERIAL ANSI 61 GRAY POWDER COATED FINISH 48 INCH 6 INCH 6 INCH UL 870, CSA APPROVAL NEMA 3R, IP24 ENCLOSURE PADLOCKABLE, SCREW, SLIP-ON COVER TYPE WIRING TROUGH ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION PROTECT MULTIPLE WIRING JUNCTIONS IN OUTDOOR ENVIRONMENTS AGAINST THE INGRESS OF RAIN, SLEET, SNOW AND THE EXTERNAL FORMATION OF ICE C3RWT MODEL
$
151.00
Qty:
Part #:HAMC3RWT660
- 14/16 GAUGE GALVANIZED STEEL MATERIAL ANSI 61 GRAY POWDER COATED FINISH 60 INCH 6 INCH 6 INCH UL 870, CSA APPROVAL NEMA 3R, IP24 ENCLOSURE PADLOCKABLE, SCREW, SLIP-ON COVER TYPE WIRING TROUGH ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION PROTECT MULTIPLE WIRING JUNCTIONS IN OUTDOOR ENVIRONMENTS AGAINST THE INGRESS OF RAIN, SLEET, SNOW AND THE EXTERNAL FORMATION OF ICE C3RWT MODEL
$
180.65
Qty:
Part #:HAMC3RWT824
- 14/16 GAUGE GALVANIZED STEEL MATERIAL ANSI 61 GRAY POWDER COATED FINISH 24 INCH 8 INCH 8 INCH UL 870, CSA APPROVAL NEMA 3R, IP24 ENCLOSURE PADLOCKABLE, SCREW, SLIP-ON COVER TYPE WIRING TROUGH ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION PROTECT MULTIPLE WIRING JUNCTIONS IN OUTDOOR ENVIRONMENTS AGAINST THE INGRESS OF RAIN, SLEET, SNOW AND THE EXTERNAL FORMATION OF ICE C3RWT MODEL
$
138.01
Qty:
Part #:HAMC3RWT836
- 14/16 GAUGE GALVANIZED STEEL MATERIAL ANSI 61 GRAY POWDER COATED FINISH 36 INCH 8 INCH 8 INCH UL 870, CSA APPROVAL NEMA 3R, IP24 ENCLOSURE PADLOCKABLE, SCREW, SLIP-ON COVER TYPE WIRING TROUGH ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION PROTECT MULTIPLE WIRING JUNCTIONS IN OUTDOOR ENVIRONMENTS AGAINST THE INGRESS OF RAIN, SLEET, SNOW AND THE EXTERNAL FORMATION OF ICE C3RWT MODEL
$
167.07
Qty:
Part #:HAMC3RWT848
- 14/16 GAUGE GALVANIZED STEEL MATERIAL ANSI 61 GRAY POWDER COATED FINISH 48 INCH 8 INCH 8 INCH UL 870, CSA APPROVAL NEMA 3R, IP24 ENCLOSURE PADLOCKABLE, SCREW, SLIP-ON COVER TYPE WIRING TROUGH ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION PROTECT MULTIPLE WIRING JUNCTIONS IN OUTDOOR ENVIRONMENTS AGAINST THE INGRESS OF RAIN, SLEET, SNOW AND THE EXTERNAL FORMATION OF ICE C3RWT MODEL
$
215.06
Qty:
Displaying: 25 - 41 of 41 Matching Items