Kidde
C3rwt Series
View:
Active Filters :
- Sub Brand: C3rwt Series Kidde Nuvo Scotch
$
9.10
Qty:
Part #:3M35-GRAY-3/4X66FT
- COLOR CODING, INSULATING TYPE VINYL MATERIAL GRAY FINISH 66 FT 3/4 INCH UL 510 APPROVAL PREMIUM GRADE APPLICATION 600 V VOLTAGE RATING 7 MIL THICKNESS 32 TO 220 DEG F TEMPERATURE RATING 7 THICKNESS IN MIL 1250 V PER MIL DIELECTRIC STRENGTH SCOTCH[R] BRAND STANDARD PACKAGE 100 PER CASE 35 MODEL
$
11.06
Qty:
$
11.06
Qty:
$
11.06
Qty:
$
11.06
Qty:
$
11.06
Qty:
$
11.06
Qty:
$
11.06
Qty:
$
11.06
Qty:
Part #:3M35-VIOLET-3/4X66FT
- COLOR CODING, INSULATING TYPE VINYL MATERIAL VIOLET FINISH 66 FT 3/4 INCH UL 510 APPROVAL PREMIUM GRADE APPLICATION 600 V VOLTAGE RATING 7 MIL THICKNESS 32 TO 220 DEG F TEMPERATURE RATING 7 THICKNESS IN MIL 1250 V PER MIL DIELECTRIC STRENGTH SCOTCH[R] BRAND STANDARD PACKAGE 100 PER CASE 35 MODEL
$
11.06
Qty:
$
22.51
Qty:
$
45.02
Qty:
$
29.49
Qty:
$
60.00
Qty:
Part #:KIDI9040E
- The Fire Sentry i9040 smoke alarm is a battery operated smoke alarm that utilizes ionization sensing technology. The four (4) inch unit is smaller in diameter giving it discreet design with the same quality you would expect in a Kidde manufactured product. The i9040 is powered by a 9V battery, providing continuous protection, even during power outages. This easy to install unit includes a test button to verify the detection electronics are working as intended.
Benefits
The Fire Sentry i9040 battery operated, single station smoke alarm provides an early warning signal to you and your family in the event of a fire hazard. The i9040 operates on a 9V battery power source that provided continuous protection even during a power outage, Installation is easy, no wiring required. This unit is UL Listed and includes a 3 year limited warranty.
This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Battery Operated (9V Battery Included) &ndash Easy installation and provides continuous protection even during power outages.
Test Button &ndash Tests unit&rsquos electronic circuitry, horn and battery function.
Low Battery Indicator &ndash Low battery warning chirp alerts user to change battery.
Discreet Design &ndash Four (4) inch diameter.
Technical Specifications
Model Number
i9040
Power Source
9V Battery (included)
Audio Alarm
85dB at 10ft
Temperature Range
40F to 100F (4°C to 38°C)
Humidity Range
up to 85% relative humidity (RH)
Sensor
Ionization
Size
4&rdquo in diameter x 1.45&rdquo depth
Weight
.5lbs
Interconnects
No
Warranty
3 year limited
$
8.13
Qty:
$
37.92
Qty:
$
46.80
Qty:
$
39.75
Qty:
$
25.84
Qty:
$
36.59
Qty:
Part #:SAT65/218
- LED Security Light - Dual Head Bronze Finish 4000K
$
64.50
Qty:
Part #:KIDKN-COSM-BA
- Description
The Kidde KN-COSM-BA Combination Carbon Monoxide & Smoke Alarm provides two important safety devices in a single unit. This alarm includes a voice warning system that announces &ldquoFire, Carbon Monoxide, Low Battery and Smart HushTM Activation.&rdquo The voice alarm eliminates any confusion and clearly warns you and your family of a smoke or carbon monoxide danger, or if your battery is in need of replacement. This technologically advanced combination alarm is battery operated protecting you and your family even during a power outage when many incidences occur.
The KN-COSM-BA is an easy to install alarm that is suitable for all living areas and has a 10-year life and a 5-year limited warranty. This alarm uses ionization sensing technology. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms.
Alarm Warnings
Fire
The red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message &ldquoFIRE!&rdquo. The alarm pattern will repeat until smoke is eliminated.
Carbon Monoxide
Four short alarm beeps followed by a verbal warning &ldquoWARNING! CARBON MONOXIDE!&rdquo This continues until the unit is reset or the CO is eliminated.
Low Battery
If any form of battery failure is detected the red LED light will flash and the unit will &ldquochirp&rdquo once every 60 seconds for at least 7 days. The &ldquoLOW BATTERY&rdquo voice occurs once every 15 minutes. The green LED will also be flashing twice per second.
Voice Hush Indication
&ldquoHUSH MODE ACTIVATED&rdquo and &ldquoHUSH MODE CANCELLED&rdquo voice announcement.
Peak Level Memory
If the alarm had detected a CO level of 100ppm or higher, the unit will announce &ldquoCARBON MONOXIDE PREVIOUSLY DETECTED&rdquo to warn of the CO incident, when the Test/ Reset button is pressed.
Voice Alarm &ndashAnnounces the hazard type detected thereby helping to speed up the correct reaction to the hazard detected. Alarm announces &ldquoFire!&rdquo when a smoke or fire hazard is detected and announces &ldquoWarning Carbon Monoxide&rdquo when a CO hazard is detected.
Combined Carbon Monoxide and Smoke Alarm &ndash A single unit can be installed where previously, two were needed. Reduces installation time and helps to keep home décor attractive.
Test/Reset Button &ndash Tests alarm circuitry and triggers the voice announcement.
LEDs &ndash Flashing green for normal operation and flashing red for alarm condition.
Low Battery Warning &ndash The unit warns of a low battery condition by announcing &ldquolow battery&rdquo and by initiating an alarm chirp and activating a flashing red LED.
Battery Powered &ndash Provides protection even during power outages when many fire and carbon monoxide incidents occur.
Battery Safeguard &ndash The battery door will not close unless the batteries are properly installed.
Hush® Feature &ndash Temporarily silences nuisance alarms.
Ionization Smoke Alarm Sensor
Technical Specifications
Model
KN-COSM-BA
Power Source
2 AA Battery
Sensor
Smoke Ionization, CO Electrochemical
Audio Alarm
85dB at 10ft
Temperature Range
40F (4.4C) to 100F (37.8C)
Humidity Range
10%-95% relative humidity non-condensing
Size
5.6&rdquo in diameter x 1.8&rdquo depth
Weight
13oz
Interconnects
No
$
50.49
Qty:
Part #:HAMC3RWT436
- 14/16 GAUGE GALVANIZED STEEL MATERIAL ANSI 61 GRAY POWDER COATED FINISH 36 INCH 4 INCH 4 INCH UL 870, CSA APPROVAL NEMA 3R, IP24 ENCLOSURE PADLOCKABLE, SCREW, SLIP-ON COVER TYPE WIRING TROUGH ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 APPLICATION PROTECT MULTIPLE WIRING JUNCTIONS IN OUTDOOR ENVIRONMENTS AGAINST THE INGRESS OF RAIN, SLEET, SNOW AND THE EXTERNAL FORMATION OF ICE C3RWT MODEL
$
88.27
Qty:
Displaying: 1 - 24 of 32 Matching Items