CANTEX INC
Allied Moled Products
View:
Active Filters :
- Mfr / Trade Name: Allied Moled Products CANTEX INC COOPER B-LINE CRC Industries
Part #:BLINBR-32-4W
- THREADED BRIDLE RING TO WOOD BEAM TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL UL (CANADA AND US) APPROVAL 1/4 INCH MOUNTING SIZE 100 PER BOX STANDARD PACKAGE 50 LB LOAD CAPACITY 2 INCH FITTING SIZE BR MODEL
$
1.59
Qty:
Part #:ENT034CO100
-
Description
CANTEX A51AGA1 is a 3/4 in. x 100 ft. coil Blue EZ-Flex Flexible ENT Electrical Nonmetallic Tubing which is a high performance low cost alternative to electrical metallic tubing.
Features
Used in ceilings, walls and slabs and is concrete tight when proper solvent cement is used
Non-conductive and corrosion resistant
Corrugated design allows for hand bending
Meets NEMA TC-13 and NEC Article 331 Standards
ETL Listed
Made in USA
$
1.46
Qty:
Part #:CRC02094
- WATER WHITE COLOR -40 TO 400 DEG F TEMPERATURE RATING CAN CONTAINER TYPE 10 OUNCE CONTAINER SIZE SILICONE BASE 0 DEG F FLASH POINT AEROSOL, LIQUID PHYSICAL FORM ROHS COMPLIANT UNIT PACKAGE 16 OUNCE FILM TYPE DRY, CLEAR, NON-HARDENING ODOR MILD SOLVENT BOILING POINT 118.4 DEG F PROPELLANT TYPE HYDROCARBON DIELECTRIC STRENGTH 350 MILLIVOLT SPECIFIC GRAVITY 0.6694 EVAPORATION RATE FAST VAPOR PRESSURE 1577.3 HECTOPASCAL VAPOR DENSITY GREATER THAN 1 (AIR EQUAL TO 1) VOC CONTENT 649.9 GPL OVERALL DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 7.75 INCH HEIGHT APPLICABLE STANDARD NSF H1
$
12.91
Qty:
Part #:CRC14050
- AEROSOL CONTAINER TYPE TAPPING, THREADING, DRILLING, SAWING, SHEARING, TURNING, REAMING ITEM TYPE 300 DEG F TEMPERATURE RANGE 16 OUNCE CONTAINER SIZE PHYSICAL STATE LIQUID COLOR BROWN BASE TYPE PETROLEUM VOC CONTENT 184.8 GALLON PER LITER MELTING POINT -40 DEG F FLASH POINT 300 DEG F NET FILL 12 OUNCE UNIT DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 7.75 INCH HEIGHT APPLICABLE STANDARD NSF P1
$
12.57
Qty:
Part #:CRC14077
- POLYURETHANE TYPE TAN COLOR UL APPLICABLE STANDARD FILLING, INSULATING, SEALING, BONDING, HVAC, ELECTRICAL, INDUSTRIAL, PLUMBING, AROUND ELECTRICAL OUTLET, UTILITY PANEL, DUCT, PIPE, DOOR, WINDOW, BASE PLATE, JOINT, CRACK, CRAWLSPACE, FOUNDATION, SPOT INSULATING, TOUCH-UP APPLICATION -200 TO 200 DEG F TEMPERATURE RATING AEROSOL CAN CONTAINER TYPE 16 OUNCE CONTAINER CAPACITY 12 TO 24 HOUR (CURE TIME) SETTING TIME ROHS COMPLIANT OVERALL DIMENSION 2.19 INCH WIDTH X 2.19 INCH DEPTH X 8.06 INCH HEIGHT SPECIFIC GRAVITY 1.2 VOC CONTENT 35 GRAM PER LITER NET FILL 12 OUNCE
$
16.54
Qty:
Part #:CRC18414
- CORROSION TYPE GRAY COLOR THREAD, EXPOSED EDGE, FASTENER, CONDUIT, STRAPPING, WELD, FENCING, RAILING, GRATE, ELECTRICAL POLE, BREAKER PANEL HOUSING, RAIN SPOUT, SIGN, DOOR, TRAILER, WASTE CONTAINER, CATWALK, GUARD RAIL APPLICATION AEROSOL, BOTTLE CONTAINER TYPE 13 OUNCE CONTAINER SIZE 15 TO 30 MINUTE DRYING TIME BRIGHT ZINC-IT[R] BRAND OVERALL DIMENSION 5.62 INCH WIDTH X 11.31 INCH DEPTH X 8.68 INCH HEIGHT
$
16.58
Qty:
Part #:ALM9313-EWK
- OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 5-15/16 INCH 3-1/4 INCH 2-7/8 INCH 3 GANG(S) UL 514C APPROVAL (4) EARS, WING BRACKET MOUNTING 25 STANDARD PACKAGE 42.5 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN 9313-EW MODEL
$
5.76
Qty:
Part #:ALM9331-ESK
- OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2-3/8 INCH 3-1/4 INCH 2-1/2 INCH 1 GANG(S) UL 514C APPROVAL (2) EARS, SNAP BRACKET MOUNTING 50 STANDARD PACKAGE 14 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN 9331-ES MODEL
$
2.06
Qty:
Part #:ALM9342-HN
- MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 4 INCH 4 INCH 2-1/4 INCH UL 514C APPROVAL (2) NAIL, HN HANGER MOUNTING 50 STANDARD PACKAGE 27.3 CU INCH CAPACITY (2) WIRE CLAMPS CABLE ENTRY FIBERGLASSBOX[TM] BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (WIRE CLAMP/BRACKET), ZINC PLATED STEEL (SCREW) USED ON NON-METALLIC SHEATHED CABLE
$
3.05
Qty:
Part #:ALM9343-NK
- MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 4-1/16 INCH 4-1/16 INCH 2-1/2 INCH UL 514C APPROVAL (2) NAILS MOUNTING 50 STANDARD PACKAGE 32.3 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY FIBERGLASSBOX[TM] BRAND COLOR BEIGE/TAN MATERIAL PLATED CARBON STEEL (NAIL), ZINC PLATED STEEL (SCREW), PVC (SPEED CLAMP) USED ON NON-METALLIC SHEATHED CABLE
$
4.16
Qty:
$
1.99
Qty:
Part #:ALM9361-ESK
- OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2-3/8 INCH 3-1/4 INCH 2-7/8 INCH 1 GANG(S) UL 514C APPROVAL (2) EARS, SNAP BRACKET MOUNTING 50 STANDARD PACKAGE 16 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN 9361-ES MODEL
$
3.27
Qty:
Part #:ALM9363-EWK
- GANGABLE, WALL, OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2-3/8 INCH 3-1/4 INCH 2-27/32 INCH 1 GANG(S) UL 514C APPROVAL (2) EARS, WING BRACKET MOUNTING 100 STANDARD PACKAGE 16 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (EAR/WING), ZINC COATED STEEL (WING SCREW) USED ON NON-METALLIC SHEATHED CABLE APPLICATION RESIDENTIAL 9363-EW MODEL
$
2.81
Qty:
Part #:ALM2302-NK
- GANGABLE, WALL, NEW WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 4 INCH 3-3/4 INCH 3-7/16 INCH 2 GANG(S) UL 514C APPROVAL (2) ANGLED MID NAILS MOUNTING 50 STANDARD PACKAGE 37 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL PLATED CARBON STEEL (NAIL), PVC (SPEED CLAMP) APPLICATION RESIDENTIAL 2302-NK MODEL
$
3.08
Qty:
Part #:ALM3303-NK
- GANGABLE, WALL, NEW WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 5-11/16 INCH 3-3/4 INCH 3-9/16 INCH 3 GANG(S) UL 514C APPROVAL (2) ANGLED MID NAILS MOUNTING 20 STANDARD PACKAGE 56.5 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL PLATED CARBON STEEL (NAIL), PVC (SPEED CLAMP) USED ON NON-METALLIC SHEATHED CABLE APPLICATION RESIDENTIAL 3303-NK MODEL
$
4.31
Qty:
Part #:ALM4304-NK
- GANGABLE, NEW WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 7-1/2 INCH 3-3/4 INCH 3-9/16 INCH 4 GANG(S) UL 514C APPROVAL (2) ANGLED MID NAILS MOUNTING 20 STANDARD PACKAGE 75 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND 4304-NK MODEL
$
6.20
Qty:
Part #:ALM5305-NBK
- NEW WORK TYPE FIBERGLASS REINFORCED POLYESTER BMC MATERIAL 9-5/16 INCH 3-3/4 INCH 3-9/16 INCH 5 GANG(S) ANSI/UL 514C APPROVAL ANGLED MID NAIL, ADJUSTABLE STABILIZING BAR MOUNTING 6 PER CARTON STANDARD PACKAGE 94 CUBIC INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE ALLIED MOULDED BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (BRACKET), PLATED CARBON STEEL (FASTENER, CLAMP) USED ON NON-METALLIC SHEATHED CABLE APPLICATION RESIDENTIAL
$
23.54
Qty:
Part #:ALM9312-EWK
- GANGABLE, WALL, OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 4-1/8 INCH 3-1/4 INCH 2-3/4 INCH 2 GANG(S) UL 514C APPROVAL (4) EARS, WING BRACKET MOUNTING 50 STANDARD PACKAGE 28 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (EAR/WING), ZINC COATED STEEL (WING SCREW), PVC (SPEED CLAMP) USED ON NON-METALLIC SHEATHED CABLE APPLICATION RESIDENTIAL 9312-EW MODEL
$
4.18
Qty:
Part #:ALM9338-ESK
- WALL FIXTURE TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2 INCH UL 514C APPROVAL 3-1/2 INCH DIAMETER (2) EARS, SNAP BRACKET MOUNTING 50 STANDARD PACKAGE 14 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN FIXTURE RATING 15 LB 9338-ES MODEL
$
3.23
Qty:
Part #:ALM9368-EWK
- GANGABLE, WALL, OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2-3/8 INCH 3-1/4 INCH 3-3/16 INCH 1 GANG(S) UL 514C APPROVAL (2) EARS, WING BRACKET MOUNTING 100 STANDARD PACKAGE 18 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (EAR) USED ON NON-METALLIC SHEATHED CABLE APPLICATION RESIDENTIAL 9368-EW MODEL
$
3.29
Qty:
Part #:ALMLH-12P
- OUTLET BOX TYPE 4-9/16 INCH DIA X 2-1/8 INCH H SIZE UL 496, UL (CANADA AND US) APPROVAL 250 V VOLTAGE RATING 1-PIECE CONSTRUCTION 660 W LAMP WATTAGE (2) SCREW TERMINAL TYPE PULL CHAIN OPERATOR TYPE E26 MEDIUM LAMP BASE WHITE BODY COLOR APPLICABLE STANDARD ANSI INCLUDES 3 FT PULL CORD SERIES LH MODEL
$
4.31
Qty:
Part #:CTXEZ25DO
- OLD WORK TYPE PVC MATERIAL 4 INCH 3 INCH 2-3/4 INCH 2 GANG(S) UL APPROVAL (2) EZ MOUNT RETAINER MOUNTING 30 PER CARTON STANDARD PACKAGE 25 CU INCH CAPACITY (6) KNOCKOUTS CABLE ENTRY EZ BOX[R] BRAND APPLICATION RESIDENTIAL, MASONRY WALL
$
2.10
Qty:
Part #:STRUTDEEPGAL14###################
- METAL FRAMING, SINGLE TYPE LOW CARBON STEEL MATERIAL PRE GALVANIZED FINISH 10 FT 1-5/8 INCH 1-5/8 INCH SLOTTED CONFIGURATION 14 GAUGE THICKNESS COLD FORMED PROCESS 1.442 LB/FT WEIGHT 2 INCH CENTER SPACING 1 CHANNEL(S) 9/16 INCH L X 7/8 INCH W HOLE/SLOT SIZE 1.419 INCH DEFLECTION 0.424 SQ INCH CROSS SECTION AREA 276 LB BEAM LOAD RATING 942 LB COLUMN LOAD RATING COLUMN LOAD RATING AT CENTER OF GRAVITY 1236 LB B24SH MODEL
$
231.80
Per Hundred FT
Qty:
Displaying: 1 - 24 of 48 Matching Items