Metallics
CANTEX INC
View:
Active Filters :
- Mfr / Trade Name: CANTEX INC Metallics SELECTA-PRODUCTS s.e.s.
Part #:MTLWAKJ14
- ANCHOR, MASONRY DRILL BIT, SCREW TYPE 201 PIECE(S) JAR PACKAGING TYPE (100) 1/4 INCH RED PLASTIC ANCHOR, (100) #10 X 1 INCH PAN COMBO SCREW, (1) 1/4 INCH MASONRY DRILL KIT CONTENT WEIGHT 1.01 LB PACKAGING QUANTITY 1 JAR
$
8.26
Qty:
$
45.02
Qty:
$
29.49
Qty:
Part #:ENT034CO100
-
Description
CANTEX A51AGA1 is a 3/4 in. x 100 ft. coil Blue EZ-Flex Flexible ENT Electrical Nonmetallic Tubing which is a high performance low cost alternative to electrical metallic tubing.
Features
Used in ceilings, walls and slabs and is concrete tight when proper solvent cement is used
Non-conductive and corrosion resistant
Corrugated design allows for hand bending
Meets NEMA TC-13 and NEC Article 331 Standards
ETL Listed
Made in USA
$
1.46
Qty:
Part #:SMI100-AC
- 120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money.
» Single button test/silence » 9V Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Smart Technology - helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » 10-Year Limited Warranty
$
14.91
Qty:
Part #:SMICO100-AC
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
61.28
Qty:
Part #:CTXEZ25DO
- OLD WORK TYPE PVC MATERIAL 4 INCH 3 INCH 2-3/4 INCH 2 GANG(S) UL APPROVAL (2) EZ MOUNT RETAINER MOUNTING 30 PER CARTON STANDARD PACKAGE 25 CU INCH CAPACITY (6) KNOCKOUTS CABLE ENTRY EZ BOX[R] BRAND APPLICATION RESIDENTIAL, MASONRY WALL
$
2.10
Qty:
$
82.71
Qty:
Part #:MTLAS78
- SHIP TYPE HEAT TREATED TOOL STEEL MATERIAL 6 INCH OVERALL LENGTH HEX SHANK TYPE 7/16 INCH SHANK SIZE NUMBER OF FLUTES 1 FLUTE TYPE TWIST WEIGHT 0.39 LB PACKAGING QUANTITY 1 BIT PER PACK INCLUSIONS/FEATURES DEEP THROAT FOR FAST CHIP REMOVAL, EXTRA HIGH QUALITY, DESIGNED FOR WOOD PRODUCT CONSTRUCTION DIAMETER 7/8 INCH DIAMETER - DECIMAL .875 DIAMETER - DECIMAL - UOM IN DIAMETER - FRACTIONAL 7/8
$
37.01
Qty:
Part #:MTLAL34
- SHIP TYPE HEAT TREATED TOOL STEEL MATERIAL 17 INCH OVERALL LENGTH HEX SHANK TYPE 7/16 INCH SHANK SIZE NUMBER OF FLUTES 1 FLUTE TYPE TWIST WEIGHT 0.91 LB PACKAGING QUANTITY 1 BIT PER PACK INCLUSIONS/FEATURES DEEP THROAT FOR FAST CHIP REMOVAL, EXTRA HIGH QUALITY, DESIGNED FOR WOOD PRODUCT CONSTRUCTION DIAMETER 3/4 INCH DIAMETER - DECIMAL .75 DIAMETER - DECIMAL - UOM IN DIAMETER - FRACTIONAL 3/4
$
47.23
Qty:
Part #:MTLJRM113
- SLOTTED/PHILLIPS TYPE STEEL MATERIAL ZINC CHROMATE FINISH 2 INCH #10 NOMINAL DIAMETER 32 TPI ROUND HEAD STYLE
$
0.05
Qty:
Part #:SBN12
- SILICON BRONZE MATERIAL 1/2 INCH NOMINAL DIAMETER 13 TPI METALLICS BRAND BOLT SIZE 1/2 INCH
$
238.94
Per Hundred
Qty:
$
23.52
Qty:
Part #:SELSS201-1-BG
- BAT TOGGLE TYPE 0.66 INCH W X 0.9 INCH D X 0.925 INCH H SIZE 0.562 INCH TOGGLE LENGTH SPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC VOLTAGE RATING 15/32 INCH-32 TPI X 0.325 INCH L BUSHING MOUNTING 6 AMPERE AT 125 VAC, 3 AMPERE AT 250 VAC CURRENT RATING SCREW TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL MOUNTING HOLE DIAMETER 0.5 INCH
$
19.33
BG
Qty:
Part #:SELSS202P-BG
- BAT HANDLE TYPE 0.634 INCH WIDTH X 1.107 INCH DEPTH X 1.134 INCH HEIGHT SIZE 0.687 INCH TOGGLE LENGTH SPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VOLT AC VOLTAGE RATING 15/32 INCH-32 TPI X 0.465 INCH LENGTH BUSHING MOUNTING 20 AMP AT 125 VOLT AC, 12 AMP AT 250 VOLT AC CURRENT RATING 0.25 INCH SPADE TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL SELECTA BRAND MOUNTING HOLE DIAMETER 0.5 INCH POWER RATING 1 HP AT 125 TO 250 VOLT AC
$
8.10
BG
Qty:
Part #:SELSS203P-BG
- BAT TOGGLE TYPE 0.75 INCH W X 1.25 INCH D X 1.312 INCH H SIZE 0.687 INCH TOGGLE LENGTH DPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC VOLTAGE RATING 15/32 INCH-32 TPI X 0.469 INCH L BUSHING MOUNTING 20 AMPERE AT 250 VAC CURRENT RATING 0.25 INCH SPADE TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL MOUNTING HOLE DIAMETER 0.5 INCH
$
21.62
BG
Qty:
Part #:SELSS204-4-BG
- BAT TOGGLE TYPE 0.524 INCH W X 0.56 INCH D X 1.305 INCH H SIZE 0.687 INCH TOGGLE LENGTH SPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC/VDC VOLTAGE RATING 15/32 INCH-32 TPI X 0.465 INCH L BUSHING MOUNTING 6 AMPERE AT 125 VAC/VDC, 3 AMPERE AT 250 VAC/VDC CURRENT RATING SCREW TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL MOUNTING HOLE DIAMETER 0.5 INCH
$
19.40
BG
Qty:
Part #:SELSS205-5-BG
- BAT TOGGLE TYPE 0.524 INCH W X 0.56 INCH D X 0.89 INCH H SIZE 0.687 INCH TOGGLE LENGTH SPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC/VDC VOLTAGE RATING 15/32 INCH-32 TPI X 0.465 INCH L BUSHING MOUNTING 10 AMPERE AT 125 VAC/VDC, 5 AMPERE AT 250 VAC/VDC CURRENT RATING 6 INCH WIRE LEAD TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL MOUNTING HOLE DIAMETER 0.5 INCH POWER RATING 1/4 HP AT 125 TO 250 VAC/VDC
$
15.16
BG
Qty:
$
17.95
E
Qty:
Part #:SELSS207-7A-BG
- BAT TOGGLE TYPE 0.75 INCH W X 1.14 INCH D X 1.30 INCH H SIZE 0.687 INCH TOGGLE LENGTH DPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC VOLTAGE RATING 15/32 INCH-32 TPI X 0.465 INCH L BUSHING MOUNTING 20 AMPERE AT 250 VAC CURRENT RATING SCREW TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL MOUNTING HOLE DIAMETER 0.5 INCH
$
24.60
BG
Qty:
Part #:SELSS208-16-BG
- BAT TOGGLE TYPE 0.75 INCH W X 1.14 INCH D X 1.30 INCH H SIZE 0.687 INCH TOGGLE LENGTH DPDT CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF/MAINTAINED ON OPERATION TYPE 125/250 VAC VOLTAGE RATING 15/32 INCH-32 TPI X 0.465 INCH L BUSHING MOUNTING 20 AMPERE AT 250 VAC CURRENT RATING SCREW TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL MOUNTING HOLE DIAMETER 0.5 INCH
$
31.38
BG
Qty:
Part #:SELSS209-8-BG
- BAT TOGGLE TYPE 0.836 INCH W X 0.765 INCH D X 1.764 INCH H SIZE 0.687 INCH TOGGLE LENGTH SPST CONTACT CONFIGURATION MAINTAINED ON/MAINTAINED OFF OPERATION TYPE 125/250 VAC/VDC VOLTAGE RATING 15/32 INCH-32 TPI X 0.465 INCH L BUSHING MOUNTING 16 AMPERE AT 125 VAC/VDC, 8 AMPERE AT 250 VAC/VDC CURRENT RATING SCREW TERMINAL TYPE BRASS/NICKEL TOGGLE MATERIAL MOUNTING HOLE DIAMETER 0.5 INCH POWER RATING 1 HP AT 125 TO 250 VAC/VDC
$
24.55
BG
Qty:
Displaying: 1 - 24 of 81 Matching Items