L.H. DOTTIE CO.
COOPER B-LINE
View:
Active Filters :
- Mfr / Trade Name: COOPER B-LINE L.H. DOTTIE CO. s.e.s. Tork
Part #:BLINBR-32-4W
- THREADED BRIDLE RING TO WOOD BEAM TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL UL (CANADA AND US) APPROVAL 1/4 INCH MOUNTING SIZE 100 PER BOX STANDARD PACKAGE 50 LB LOAD CAPACITY 2 INCH FITTING SIZE BR MODEL
$
1.59
Qty:
$
10.80
Qty:
Part #:BRK9120B
- 120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money.
» Single button test/silence » 9V Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Smart Technology - helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » 10-Year Limited Warranty
$
10.73
Qty:
Part #:BRKSC9120B
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
44.25
Qty:
Part #:DOTPFP50
- PISTON TYPE DURABLE FOAM MATERIAL 1/2 INCH CONDUIT SIZE PULLING EYES MATERIAL METAL FITS MOST CONDUITS 1/2 TO 6 INCH PFP MODEL
$
4.24
Qty:
Part #:STRUTDEEPGAL14###################
- METAL FRAMING, SINGLE TYPE LOW CARBON STEEL MATERIAL PRE GALVANIZED FINISH 10 FT 1-5/8 INCH 1-5/8 INCH SLOTTED CONFIGURATION 14 GAUGE THICKNESS COLD FORMED PROCESS 1.442 LB/FT WEIGHT 2 INCH CENTER SPACING 1 CHANNEL(S) 9/16 INCH L X 7/8 INCH W HOLE/SLOT SIZE 1.419 INCH DEFLECTION 0.424 SQ INCH CROSS SECTION AREA 276 LB BEAM LOAD RATING 942 LB COLUMN LOAD RATING COLUMN LOAD RATING AT CENTER OF GRAVITY 1236 LB B24SH MODEL
$
231.80
Per Hundred FT
Qty:
Part #:10104SCNKOGRAYN1
- UNFLANGED TYPE STEEL MATERIAL ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 4 INCH UL 50, CSA C22.2, IEC 529 APPROVAL WALL MOUNT MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON COVER TYPE 16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE APPLICATION WIRING BOXES, JUNCTION AND PULL BOXES
$
21.75
Qty:
Part #:10106SCNKOGALVN1
- UNFLANGED TYPE STEEL MATERIAL GALVANIZED, ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 6 INCH UL 50, CSA C22.2, IEC 529 APPROVAL WALL MOUNT MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON COVER TYPE 16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE APPLICATION WIRING BOXES, JUNCTION AND PULL BOXES
$
20.47
Qty:
Part #:TORK1101B
- 24 HR TYPE METAL MATERIAL 4-11/16 INCH W X 2-15/16 INCH D X 7-15/16 INCH H SIZE 75 MIN MIN. OFF TIME 20 MIN MIN. ON TIME UL (CANADA AND US) APPROVAL LIGHTING, PUMP, SIGN, AIR CONDITIONING, WATER HEATER, FAN APPLICATION 120 VAC AT 60 HZ VOLTAGE RATING SCREW MOUNTING NEMA 1 ENCLOSURE 40 AMPERE CURRENT RATING 3 W POWER RATING -40 TO 74 DEG C OPERATING TEMPERATURE SPST SWITCH TYPE TORK[R] BRAND SERIES 1100 MODEL
$
214.61
Qty:
Part #:12128SCWKOGALVN1
- STEEL MATERIAL ACRYLIC ELECTROCOATED OVER GALVANIZED SURFACE FINISH ANSI 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 12 INCH 12 HEIGHT IN INCH 8 INCH 304.8 HEIGHT IN MM UL 50, CSA 22.2 APPROVAL WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON COVER TYPE 16 GAUGE MATERIAL SPECIFICATION (2) (1/2 INCH - 3/4 INCH) CONDUIT CONCENTRIC KNOCKOUT TOP, (2) (3/4 INCH - 1 INCH) CONDUIT CONCENTRIC KNOCKOUT TOP, (1) (1 INCH - 1 1/4 INCH) CONDUIT CONCENTRIC KNOCKOUT TOP, (2) (1/2 INCH - 3/4 INCH) CONDUIT CONCENTRIC KNOCKOUT BOTTOM, (2) (3/4 INCH - 1 KNOCKOUT SIZE 20 KNOCKOUT(S) (5) TOP, (5) BOTTOM, (10) SIDES KNOCKOUT LOCATION B-LINE. BRAND APPLICABLE STANDARD IEC 529 PANEL NONE HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN
$
53.93
Qty:
Part #:BLINBB8-16
- WALL STUD, SUPPORT TYPE PRE-GALVANIZED FINISH UL (CANADA AND US) APPROVAL SUPPORTS 4 INCH, 4-11/16 INCH BOX/PLASTER RING APPLICATION BOX BRACKET RUFF-IN[TM] BRAND STUD SPACING 16 INCH BB MODEL
$
3.03
Qty:
Part #:SHOOK112
- OPEN END TYPE STEEL MATERIAL ZINC PLATED FINISH 1-1/2 INCH OVERALL LENGTH 7/16 INCH INSIDE DIAMETER 7 GAUGE WIRE DIAMETER OPEN WIDTH 1/4 INCH
$
0.40
Qty:
Part #:STRUTSHALLOWGAL14###############
- METAL FRAMING, SINGLE TYPE LOW CARBON STEEL MATERIAL PRE GALVANIZED ZINC FINISH 10 FT 1-5/8 INCH 13/16 INCH SLOTTED CONFIGURATION 14 GAUGE THICKNESS COLD FORMED PROCESS 0.91 LB/FT WEIGHT 2 INCH CENTER SPACING 1 CHANNEL(S) 7/8 INCH L X 9/16 W HOLE/SLOT SIZE 0.299 SQ INCH CROSS SECTION AREA B-LINE. BRAND STANDARD BUNDLE 500 FT B54 MODEL
$
182.40
Per Hundred FT
Qty:
$
28.43
Qty:
Part #:SBLW12
- SPLIT TYPE SILICON BRONZE MATERIAL 1/2 INCH FASTENER SIZE PC 4015 MODEL
$
113.52
Qty:
Part #:DOTD151
- PHILIPS, SLOTTED, SQUARE, STAR, HEX TYPE 15 PIECE(S) GREEN HANDLE COLOR #0 AND #3, #1 AND #2 PHILLIPS, #0 AND #3, #1 AND #2 SQUARE, T10 AND T15, T20 AND T25 STAR, #4 AND #6 SLOTTED BITS, 1/4 INCH HEX SET CONTENT
$
22.96
Qty:
Part #:TAPCON316X114
- CERAMIC COATED BLUE FINISH 1-1/4 INCH ANCHOR LENGTH 1-1/4 INCH SCREW LENGTH 3/16 INCH SCREW SIZE 5/32 INCH DRILL SIZE SLOTTED HEX HEAD TYPE 3/16 INCH ANCHOR SIZE APPLICATION CONCRETE ANCHORING SYSTEM INCLUDES DRILL
$
0.22
Qty:
Part #:TAPCON316X314
- STEEL MATERIAL CERAMIC COATED BLUE FINISH 1-3/4 INCH ANCHOR LENGTH 5/32 INCH X 3-1/2 INCH DRILL SIZE HEX HEAD TYPE 3/16 INCH DIA ANCHOR SIZE BIT SIZE 1/4 INCH DRIVE TYPE SLOTTED APPLICATION CONCRETE INCLUDES DRILL
$
0.49
Qty:
Part #:TAPCON316X214
- STEEL MATERIAL CERAMIC COATED BLUE FINISH 2-1/4 INCH ANCHOR LENGTH 5/32 INCH X 4-1/2 INCH DRILL SIZE HEX HEAD TYPE 3/16 INCH DIA ANCHOR SIZE BIT SIZE 1/4 INCH DRIVE TYPE SLOTTED APPLICATION CONCRETE INCLUDES DRILL
$
0.32
Qty:
Part #:TAPCON316X234
- STEEL MATERIAL CERAMIC COATED BLUE FINISH 2-3/4 INCH ANCHOR LENGTH 5/32 INCH X 4-1/2 INCH DRILL SIZE HEX HEAD TYPE 3/16 INCH DIA ANCHOR SIZE BIT SIZE 1/4 INCH DRIVE TYPE SLOTTED APPLICATION CONCRETE INCLUDES DRILL
$
0.34
Qty:
Part #:DOTSDS36814
- ROTARY HAMMER TYPE TUNGSTEN CARBIDE TIPPED MATERIAL 8-1/4 INCH OVERALL LENGTH 6 INCH DRILLING LENGTH SDS 4 PLUS SHANK TYPE 6 FLUTE(S) SPIRAL FLUTE TYPE 3/16 INCH DRILL SIZE APPLICATION CONCRETE, MASONRY, BRICK, STONE SDS MODEL
$
10.48
Qty:
Part #:SELFWSAEK
- FLAT WASHER TYPE BOX PACKAGING TYPE (120) #8, (120) #10, (60) 1/4 INCH, (30) 5/16 INCH, (85) 3/8, (6) 1/2 INCH FLAT WASHER SET ITEMS MATERIAL STEEL FINISH ZINC PLATED FW MODEL
$
21.34
Qty:
Part #:SELAKDEK
- WOOD ROCKET TYPE BOX PACKAGING TYPE (80) #6 X 1 INCH, (70) #6 X 1-1/8 INCH, (65) #6 X 1-1/4 INCH, (45) #6 X 1-5/8 INCH, (40) #6 X 2 INCH, (35) #6 X 2-1/4 INCH WOOD ROCKET SET ITEMS MATERIAL ZINC PLATED STEEL SERIES WR MODEL
$
17.76
Qty:
Part #:FENW316X114
- STEEL MATERIAL ZINC PLATED FINISH 3/16 INCH INNER DIAMETER 1-1/4 INCH OUTER DIAMETER APPLICATION GENERAL PURPOSE, LARGE LOAD BEARING SURFACE SERIES FENW MODEL
$
24.76
Qty:
Displaying: 1 - 24 of 246 Matching Items