ERICO INC.
COOPER B-LINE
View:
Active Filters :
- Mfr / Trade Name: COOPER B-LINE ERICO INC. Reliance Controls s.e.s.
Part #:BLINBR-32-4W
- THREADED BRIDLE RING TO WOOD BEAM TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL UL (CANADA AND US) APPROVAL 1/4 INCH MOUNTING SIZE 100 PER BOX STANDARD PACKAGE 50 LB LOAD CAPACITY 2 INCH FITTING SIZE BR MODEL
$
1.59
Qty:
$
83.99
Qty:
Part #:BRK9120B
- 120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money.
» Single button test/silence » 9V Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Smart Technology - helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » 10-Year Limited Warranty
$
10.73
Qty:
Part #:BRKSC9120B
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
44.25
Qty:
Part #:STRUTDEEPGAL14###################
- METAL FRAMING, SINGLE TYPE LOW CARBON STEEL MATERIAL PRE GALVANIZED FINISH 10 FT 1-5/8 INCH 1-5/8 INCH SLOTTED CONFIGURATION 14 GAUGE THICKNESS COLD FORMED PROCESS 1.442 LB/FT WEIGHT 2 INCH CENTER SPACING 1 CHANNEL(S) 9/16 INCH L X 7/8 INCH W HOLE/SLOT SIZE 1.419 INCH DEFLECTION 0.424 SQ INCH CROSS SECTION AREA 276 LB BEAM LOAD RATING 942 LB COLUMN LOAD RATING COLUMN LOAD RATING AT CENTER OF GRAVITY 1236 LB B24SH MODEL
$
231.80
Per Hundred FT
Qty:
Part #:10104SCNKOGRAYN1
- UNFLANGED TYPE STEEL MATERIAL ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 4 INCH UL 50, CSA C22.2, IEC 529 APPROVAL WALL MOUNT MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON COVER TYPE 16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE APPLICATION WIRING BOXES, JUNCTION AND PULL BOXES
$
21.75
Qty:
Part #:10106SCNKOGALVN1
- UNFLANGED TYPE STEEL MATERIAL GALVANIZED, ACRYLIC ELECTROCOATED OVER PHOSPHATIZED SURFACE FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 6 INCH UL 50, CSA C22.2, IEC 529 APPROVAL WALL MOUNT MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON COVER TYPE 16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE APPLICATION WIRING BOXES, JUNCTION AND PULL BOXES
$
20.47
Qty:
Part #:12128SCWKOGALVN1
- STEEL MATERIAL ACRYLIC ELECTROCOATED OVER GALVANIZED SURFACE FINISH ANSI 61 GRAY COLOR 12 INCH 12 WIDTH IN INCH 12 INCH 12 HEIGHT IN INCH 8 INCH 304.8 HEIGHT IN MM UL 50, CSA 22.2 APPROVAL WALL MOUNTING NEMA 1, IP30 ENCLOSURE SCREW ON COVER TYPE 16 GAUGE MATERIAL SPECIFICATION (2) (1/2 INCH - 3/4 INCH) CONDUIT CONCENTRIC KNOCKOUT TOP, (2) (3/4 INCH - 1 INCH) CONDUIT CONCENTRIC KNOCKOUT TOP, (1) (1 INCH - 1 1/4 INCH) CONDUIT CONCENTRIC KNOCKOUT TOP, (2) (1/2 INCH - 3/4 INCH) CONDUIT CONCENTRIC KNOCKOUT BOTTOM, (2) (3/4 INCH - 1 KNOCKOUT SIZE 20 KNOCKOUT(S) (5) TOP, (5) BOTTOM, (10) SIDES KNOCKOUT LOCATION B-LINE. BRAND APPLICABLE STANDARD IEC 529 PANEL NONE HEIGHT IN INCH - UOM IN HEIGHT IN MM - UOM MM WIDTH IN INCH - UOM IN
$
53.93
Qty:
Part #:BLINBB8-16
- WALL STUD, SUPPORT TYPE PRE-GALVANIZED FINISH UL (CANADA AND US) APPROVAL SUPPORTS 4 INCH, 4-11/16 INCH BOX/PLASTER RING APPLICATION BOX BRACKET RUFF-IN[TM] BRAND STUD SPACING 16 INCH BB MODEL
$
3.03
Qty:
Part #:CAD812M24SM
- H-MSM CONDUIT SNAP CLOSE CLIP, 360 DEGREE PIVOT TYPE ARMOR SPRING STEEL MATERIAL HAMMER-ON INSTALLATION UL, CUL, UL (CANADA AND US) APPROVAL SIDE MOUNTING 100 STANDARD PACKAGE 1/2 TO 3/4 INCH EMT/RIGID CONDUIT SIZE 25 POUND LOAD CAPACITY 1/8 TO 1/4 INCH BEAM/FLANGE SIZE CADDY[R] BRAND OUTER DIAMETER 0.709 TO 1.181 INCH
$
2.44
Qty:
Part #:CAD812M24
- EM-M CONDUIT SNAP CLOSE CLIP, 360 DEGREE PIVOT TYPE ARMOR SPRING STEEL MATERIAL HAMMER-ON INSTALLATION SIDE MOUNTING 100 STANDARD PACKAGE 1/2 TO 3/4 INCH EMT/RIGID CONDUIT SIZE 75 POUND LOAD CAPACITY 1/8 TO 1/4 INCH BEAM/FLANGE SIZE CADDY[R] BRAND OUTER DIAMETER 0.71 TO 1.181 INCH
$
3.07
Qty:
Part #:CADKX
- CABLE/CONDUIT CLIP TYPE ARMOR SPRING STEEL MATERIAL UL, CUL, UL (CANADA AND US) APPROVAL 100 STANDARD PACKAGE (2) 14 AWG TO (3) 12 AWG (ARMORED/METALLIC CABLE) CONDUIT/CABLE SIZE CADDY[R] BRAND OUTER DIAMETER 0.472 INCH
$
0.90
Qty:
Part #:CADK12
- CABLE/CONDUIT CLIP TYPE CADDY ARMOUR SPRING STEEL MATERIAL UL (CANADA AND US) APPROVAL 100 PER PACK STANDARD PACKAGE 15 POUND (VERTICAL), 100 POUND (HORIZONTAL) LOAD CAPACITY 1/2 TO 3/4 INCH (RIGID/EMT), 1 INCH (EMT) CONDUIT/CABLE SIZE ERICO INTERNATIONAL CORPORATION BRAND OUTER DIAMETER 0.945 INCH
$
0.85
Qty:
Part #:CADCNB812M
- NAIL BRACKET TYPE 100 PER BOX STANDARD PACKAGE 1/2 INCH, 3/4 INCH CONDUIT CONDUIT/CABLE SIZE CADDY. BRAND CNB MODEL
$
2.19
Qty:
Part #:CADMP1S
- 1-GANG TYPE PRE-GALVANIZED STEEL MATERIAL 1/2 TO 5/8 INCH DRYWALL INSTALLATION UL (CANADA AND US) APPROVAL STUD, SCREW-ON, NAIL MOUNTING 25 STANDARD PACKAGE CADDY[R] BRAND OVERALL DIMENSION 4 INCH WIDTH X 4-1/2 INCH HEIGHT MOUNTING HOLE SIZE 0.156 INCH (HOLE 1), 0.187 INCH (HOLE 2)
$
2.52
Qty:
Part #:CADCAT32HP
- J-HOOK, WIDE BASE TYPE PRE-GALVANIZED STEEL MATERIAL UL (CANADA AND US) APPROVAL 50 PER PACK STANDARD PACKAGE 60 POUND LOAD CAPACITY 2 INCH DIAMETER FITTING SIZE ERICO INTERNATIONAL CORPORATION BRAND CABLE CAPACITY 90 (CAT 5E), 60 (CAT 6) AREA 3.97 SQUARE INCH APPLICABLE STANDARD DIN 4102-12, EN 50174-2, IEC 14763-2, TIA 568, TIA 569
$
4.60
Qty:
Part #:CAD4G16
- T-BAR TO ELECTRICAL FIXTURE TYPE CADDY ARMOUR SPRING STEEL MATERIAL ELECTRICAL FIXTURE USED ON TWIST-ON INSTALLATION UL APPROVAL 100 PER PACK STANDARD PACKAGE 50 POUND LOAD CAPACITY 9/16 INCH LENGTH X 1/4 INCH DIAMETER SCREW FASTENER TYPE 15/16 INCH T BAR SIZE ERICO INTERNATIONAL CORPORATION BRAND INCLUDES WING NUT
$
1.82
Qty:
Part #:STRUTSHALLOWGAL14###############
- METAL FRAMING, SINGLE TYPE LOW CARBON STEEL MATERIAL PRE GALVANIZED ZINC FINISH 10 FT 1-5/8 INCH 13/16 INCH SLOTTED CONFIGURATION 14 GAUGE THICKNESS COLD FORMED PROCESS 0.91 LB/FT WEIGHT 2 INCH CENTER SPACING 1 CHANNEL(S) 7/8 INCH L X 9/16 W HOLE/SLOT SIZE 0.299 SQ INCH CROSS SECTION AREA B-LINE. BRAND STANDARD BUNDLE 500 FT B54 MODEL
$
182.40
Per Hundred FT
Qty:
Part #:CAD512
- T-BAR TO ELECTRICAL BOX TYPE PRE-GALVANIZED CADDY ARMOUR SPRING STEEL MATERIAL ELECTRICAL BOX/CONDUIT USED ON SNAP-ON INSTALLATION 50 PER PACK STANDARD PACKAGE 20 POUND LOAD CAPACITY 24 INCH SPAN BOX HANGER FASTENER TYPE ERICO INTERNATIONAL CORPORATION BRAND INCLUDES MOUNTING CLIP AND SCREW
$
14.96
Qty:
Part #:CAD65
- UL (CANADA AND US) APPLICABLE STANDARD WELDING MATERIAL CADWELD USED ON MODEL/BRAND MOLD USED ON ITEM XBCY1Y1 USED ON ITEM PART NO CADWELD[R] PLUS BRAND SIZE IDENTIFICATION RING COLOR DARK GREEN
$
9.74
Qty:
Part #:BLINBA-4-16
- T BAR TO ELECTRICAL FIXTURE TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL T-BAR USED ON TWIST-ON INSTALLATION UL (CANADA AND US) APPROVAL 100 PER BOX STANDARD PACKAGE 50 LB LOAD CAPACITY 1/4 INCH-20 TPI X 5/8 INCH L STUD FASTENER TYPE 15/16 INCH T BAR SIZE FINISH BLACK BA MODEL
$
0.99
Qty:
Part #:BLINBG-8-12-U-2-4
- 360 DEGREE PIVOT TYPE ASTM A684, AISI 1055 SPHEROIDIZED ANNEALED COLD ROLLED HIGH CARBON STEEL MATERIAL HAMMER-ON, PLIERS INSTALLATION UL (CANADA AND US) APPROVAL BOTTOM MOUNTING 100 PER BOX STANDARD PACKAGE 1/2 INCH, 3/4 INCH CONDUIT SIZE 75 POUND LOAD CAPACITY 1/8 TO 1/4 INCH BEAM/FLANGE SIZE COOPER B-LINE BRAND BG MODEL
$
1.31
Qty:
Displaying: 1 - 24 of 45 Matching Items