CRC Industries
Allied Moled Products
View:
Active Filters :
- Mfr / Trade Name: Allied Moled Products CRC Industries PASS & SEYMOUR Tiffin
Part #:PASPJSC8I
- THERMOSET MATERIAL SMOOTH FINISH IVORY COLOR (1) DUPLEX RECEPTACLE CONFIGURATION SEMI JUMBO DESIGNATED SIZE CENTER SECTION MOUNTING TYPE SCREW MOUNT APPLICATION COMMERCIAL INDUSTRIAL AND RESIDENTIAL
$
5.02
Qty:
Part #:PASPJSE14I
- THERMOSET MATERIAL SMOOTH FINISH IVORY COLOR (1) BLANK CONFIGURATION SEMI JUMBO DESIGNATED SIZE END SECTION MOUNTING TYPE STRAP MOUNT APPLICATION COMMERCIAL INDUSTRIAL AND RESIDENTIAL
$
5.02
Qty:
Part #:PASPT2095NTLTRW
- DUPLEX TYPE HIGH IMPACT RESISTANT THERMOPLASTIC MATERIAL WHITE COLOR 5-20R CONFIGURATION 3 WIRE(S) SPECIFICATION GRADE UL 498/943 UL (CANADA AND US) CUL CSA C22.2 FSUL WC596 APPROVAL 125 VAC AT 60 HZ VOLTAGE RATING 20 AMPERE CURRENT RATING 2 POLE(S) APPLICABLE STANDARD NEMA WD-1/WD-6 CONSTRUCTIONAL FEATURE TAMPER RESISTANT OVERALL DIMENSION 1.72 INCH W X 1.13 INCH D X 4.2 INCH H TEMPERATURE RATING -35 TO 66 DEG C
$
49.79
Qty:
Part #:PASTP8I
- 0.07 INCH THK NYLON MATERIAL IVORY COLOR (1) DUPLEX RECEPTACLE CONFIGURATION 1 GANG(S) STANDARD DESIGNATED SIZE
$
41.25
Qty:
Part #:PAS664IG
- TOGGLE TYPE THERMOPLASTIC (TOGGLE/FRAME) MATERIAL 1.25 INCH W X 1.09 INCH D X 4.195 INCH H SIZE IVORY COLOR FOUR WAY OPERATION TYPE UL 20 CSA C22.2 APPROVAL 120 VAC VOLTAGE RATING 15 AMPERE CURRENT RATING PUSH SIDE WIRING NO WALL PLATE INCLUDED GROUNDING TYPE GROUNDING APPLICABLE STANDARD NEMA WD-1/WD-6 664 MODEL
$
1,155.00
Qty:
Part #:PASCR20
- DUPLEX TYPE THERMOPLASTIC (BACK BODY) NYLON (FACE) MATERIAL BROWN COLOR 5-20R CONFIGURATION 3 WIRE(S) COMMERCIAL GRADE UL 498 CSA C22.2 APPROVAL 125 VAC VOLTAGE RATING 20 AMPERE CURRENT RATING AUTOMATIC GROUNDING 2 POLE(S) CORROSION RESISTANT IMPACT RESISTANT SIDE WIRING APPLICABLE STANDARD NEMA WD-1/WD-6 OVERALL DIMENSION 1.322 INCH W X 0.78 INCH D X 3.281 INCH H TEMPERATURE RATING -40 TO 50 DEG C CR MODEL
$
2.00
Qty:
Part #:PAS3232
- DUPLEX TYPE THERMOPLASTIC MATERIAL BROWN COLOR 5-15R CONFIGURATION 3 WIRE(S) UL 498 CSA C22.2 APPROVAL 125 VAC VOLTAGE RATING 15 AMPERE CURRENT RATING GROUNDING 2 POLE(S) IMPACT RESISTANT PUSH SIDE WIRING APPLICABLE STANDARD NEMA WD-1/WD-6 OVERALL DIMENSION 1.32 INCH W X 0.96 INCH D X 3.31 INCH H 3232 MODEL
$
75.38
Qty:
Part #:PASP122R
- DURABLE IMPACT RESISTANT THERMOPLASTIC MATERIAL 2-1/4 INCH 3-3/4 INCH 3-3/8 INCH 1 GANG(S) UL APPROVAL CAPTIVE NAIL MOUNTING 100 STANDARD PACKAGE 22.5 CU INCH CAPACITY (4) QUICK ENTRIES CABLE ENTRY THREADED DEVICE MOUNTING HOLE
$
86.25
Qty:
Part #:PAS660BKG
- TOGGLE TYPE THERMOPLASTIC (TOGGLE/FRAME) MATERIAL 1.25 INCH W X 1.09 INCH D X 4.195 INCH H SIZE BLACK COLOR SINGLE POLE OPERATION TYPE UL 20 UL (CANADA AND US) CSA C22.2 APPROVAL 120 VAC VOLTAGE RATING 15 AMPERE CURRENT RATING PUSH SIDE WIRING NO WALL PLATE INCLUDED GROUNDING TYPE GROUNDING APPLICABLE STANDARD NEMA WD-1/WD-6 660 MODEL
$
102.38
Qty:
Part #:CRC02094
- WATER WHITE COLOR -40 TO 400 DEG F TEMPERATURE RATING CAN CONTAINER TYPE 10 OUNCE CONTAINER SIZE SILICONE BASE 0 DEG F FLASH POINT AEROSOL, LIQUID PHYSICAL FORM ROHS COMPLIANT UNIT PACKAGE 16 OUNCE FILM TYPE DRY, CLEAR, NON-HARDENING ODOR MILD SOLVENT BOILING POINT 118.4 DEG F PROPELLANT TYPE HYDROCARBON DIELECTRIC STRENGTH 350 MILLIVOLT SPECIFIC GRAVITY 0.6694 EVAPORATION RATE FAST VAPOR PRESSURE 1577.3 HECTOPASCAL VAPOR DENSITY GREATER THAN 1 (AIR EQUAL TO 1) VOC CONTENT 649.9 GPL OVERALL DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 7.75 INCH HEIGHT APPLICABLE STANDARD NSF H1
$
12.91
Qty:
Part #:CRC14050
- AEROSOL CONTAINER TYPE TAPPING, THREADING, DRILLING, SAWING, SHEARING, TURNING, REAMING ITEM TYPE 300 DEG F TEMPERATURE RANGE 16 OUNCE CONTAINER SIZE PHYSICAL STATE LIQUID COLOR BROWN BASE TYPE PETROLEUM VOC CONTENT 184.8 GALLON PER LITER MELTING POINT -40 DEG F FLASH POINT 300 DEG F NET FILL 12 OUNCE UNIT DIMENSION 2.63 INCH WIDTH X 2.63 INCH DEPTH X 7.75 INCH HEIGHT APPLICABLE STANDARD NSF P1
$
12.57
Qty:
Part #:CRC14077
- POLYURETHANE TYPE TAN COLOR UL APPLICABLE STANDARD FILLING, INSULATING, SEALING, BONDING, HVAC, ELECTRICAL, INDUSTRIAL, PLUMBING, AROUND ELECTRICAL OUTLET, UTILITY PANEL, DUCT, PIPE, DOOR, WINDOW, BASE PLATE, JOINT, CRACK, CRAWLSPACE, FOUNDATION, SPOT INSULATING, TOUCH-UP APPLICATION -200 TO 200 DEG F TEMPERATURE RATING AEROSOL CAN CONTAINER TYPE 16 OUNCE CONTAINER CAPACITY 12 TO 24 HOUR (CURE TIME) SETTING TIME ROHS COMPLIANT OVERALL DIMENSION 2.19 INCH WIDTH X 2.19 INCH DEPTH X 8.06 INCH HEIGHT SPECIFIC GRAVITY 1.2 VOC CONTENT 35 GRAM PER LITER NET FILL 12 OUNCE
$
16.54
Qty:
Part #:CRC18414
- CORROSION TYPE GRAY COLOR THREAD, EXPOSED EDGE, FASTENER, CONDUIT, STRAPPING, WELD, FENCING, RAILING, GRATE, ELECTRICAL POLE, BREAKER PANEL HOUSING, RAIN SPOUT, SIGN, DOOR, TRAILER, WASTE CONTAINER, CATWALK, GUARD RAIL APPLICATION AEROSOL, BOTTLE CONTAINER TYPE 13 OUNCE CONTAINER SIZE 15 TO 30 MINUTE DRYING TIME BRIGHT ZINC-IT[R] BRAND OVERALL DIMENSION 5.62 INCH WIDTH X 11.31 INCH DEPTH X 8.68 INCH HEIGHT
$
16.58
Qty:
Part #:ALM9313-EWK
- OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 5-15/16 INCH 3-1/4 INCH 2-7/8 INCH 3 GANG(S) UL 514C APPROVAL (4) EARS, WING BRACKET MOUNTING 25 STANDARD PACKAGE 42.5 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN 9313-EW MODEL
$
5.76
Qty:
Part #:ALM9331-ESK
- OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2-3/8 INCH 3-1/4 INCH 2-1/2 INCH 1 GANG(S) UL 514C APPROVAL (2) EARS, SNAP BRACKET MOUNTING 50 STANDARD PACKAGE 14 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN 9331-ES MODEL
$
2.06
Qty:
Part #:ALM9342-HN
- MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 4 INCH 4 INCH 2-1/4 INCH UL 514C APPROVAL (2) NAIL, HN HANGER MOUNTING 50 STANDARD PACKAGE 27.3 CU INCH CAPACITY (2) WIRE CLAMPS CABLE ENTRY FIBERGLASSBOX[TM] BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (WIRE CLAMP/BRACKET), ZINC PLATED STEEL (SCREW) USED ON NON-METALLIC SHEATHED CABLE
$
3.05
Qty:
Part #:ALM9343-NK
- MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 4-1/16 INCH 4-1/16 INCH 2-1/2 INCH UL 514C APPROVAL (2) NAILS MOUNTING 50 STANDARD PACKAGE 32.3 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY FIBERGLASSBOX[TM] BRAND COLOR BEIGE/TAN MATERIAL PLATED CARBON STEEL (NAIL), ZINC PLATED STEEL (SCREW), PVC (SPEED CLAMP) USED ON NON-METALLIC SHEATHED CABLE
$
4.16
Qty:
$
1.99
Qty:
Part #:ALM9361-ESK
- OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2-3/8 INCH 3-1/4 INCH 2-7/8 INCH 1 GANG(S) UL 514C APPROVAL (2) EARS, SNAP BRACKET MOUNTING 50 STANDARD PACKAGE 16 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN 9361-ES MODEL
$
3.27
Qty:
Part #:ALM9363-EWK
- GANGABLE, WALL, OLD WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 2-3/8 INCH 3-1/4 INCH 2-27/32 INCH 1 GANG(S) UL 514C APPROVAL (2) EARS, WING BRACKET MOUNTING 100 STANDARD PACKAGE 16 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL GALVANIZED STEEL (EAR/WING), ZINC COATED STEEL (WING SCREW) USED ON NON-METALLIC SHEATHED CABLE APPLICATION RESIDENTIAL 9363-EW MODEL
$
2.81
Qty:
Part #:ALM2302-NK
- GANGABLE, WALL, NEW WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 4 INCH 3-3/4 INCH 3-7/16 INCH 2 GANG(S) UL 514C APPROVAL (2) ANGLED MID NAILS MOUNTING 50 STANDARD PACKAGE 37 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL PLATED CARBON STEEL (NAIL), PVC (SPEED CLAMP) APPLICATION RESIDENTIAL 2302-NK MODEL
$
3.08
Qty:
Part #:ALM3303-NK
- GANGABLE, WALL, NEW WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 5-11/16 INCH 3-3/4 INCH 3-9/16 INCH 3 GANG(S) UL 514C APPROVAL (2) ANGLED MID NAILS MOUNTING 20 STANDARD PACKAGE 56.5 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND COLOR BEIGE/TAN MATERIAL PLATED CARBON STEEL (NAIL), PVC (SPEED CLAMP) USED ON NON-METALLIC SHEATHED CABLE APPLICATION RESIDENTIAL 3303-NK MODEL
$
4.31
Qty:
Part #:ALM4304-NK
- GANGABLE, NEW WORK TYPE MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER MATERIAL 7-1/2 INCH 3-3/4 INCH 3-9/16 INCH 4 GANG(S) UL 514C APPROVAL (2) ANGLED MID NAILS MOUNTING 20 STANDARD PACKAGE 75 CU INCH CAPACITY NON-METALLIC SPEED CLAMP CABLE ENTRY TAPPED DEVICE MOUNTING HOLE FIBERGLASSBOX[TM], SPEED KLAMPS[TM] BRAND 4304-NK MODEL
$
6.20
Qty:
Displaying: 1 - 24 of 379 Matching Items