Killark
Calpipe
Part #:MTLWAKJ14
- ANCHOR, MASONRY DRILL BIT, SCREW TYPE 201 PIECE(S) JAR PACKAGING TYPE (100) 1/4 INCH RED PLASTIC ANCHOR, (100) #10 X 1 INCH PAN COMBO SCREW, (1) 1/4 INCH MASONRY DRILL KIT CONTENT WEIGHT 1.01 LB PACKAGING QUANTITY 1 JAR
$
8.26
Qty:
Part #:BRK9120B
- 120V AC/DC Smoke Alarm The 9120 Series smoke alarms have been designed to install faster, perform better and be even smarter than before. These improvements help reduce nuisance alarms and save you time and money.
» Single button test/silence » 9V Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Smart Technology - helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » 10-Year Limited Warranty
$
10.73
Qty:
Part #:BRKSC9120B
- 120V AC/DC Smoke/CO Combo Alarm Hardwired ionization/CO combination alarm meets new construction requirements.
» 10YR CO Sensor/10YR End of Life » Electrochemical Carbon Monoxide Sensor - the most accurate sensor available as compared to other sensing technologies » 9V Alkaline Battery Backup » Latching alarm indicator - remembers which unit initiated an alarm » Two silence features - can silence the low-battery chirp for up to eight hours or temporarily silence an unwanted nuisance alarm » End of Life Signal provides audible notification alarms needs to be replaced » Intelligent Sensing TechnologyTM helps reduce the number of nuisance alarms » Perfect Mount - allows for easy alignment of alarm » Dust Cover » Easy Installation/Maintenance - Preferred features include a large opening in the mounting bracket for easy access to wiring. Keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. A battery pull tab keeps the battery fresh until the home is occupied. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compartment. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-Connect" wiring harness. Installation is quick, easy and cost effective. » Single button test/silence » 10-Year Limited Warranty
$
44.25
Qty:
Part #:OLK-3RG
- NEOPRENE MATERIAL UL, CSA APPROVAL SCREW ON COVER TYPE 1 INCH TRADE SIZE SERIES O FORM TYPE HUBBELL[R] BRAND O MODEL
$
9.93
Qty:
Part #:OL-6-RG
- NEOPRENE MATERIAL UL, CSA APPROVAL SCREW ON COVER TYPE 2 INCH TRADE SIZE SERIES O FORM TYPE HUBBELL[R] BRAND O MODEL
$
14.93
Qty:
Part #:KILL370
- SCREW TYPE STAMPED STEEL MATERIAL 5 INCH UL, CSA APPROVAL 1 INCH TRADE SIZE FORM 7 FORM TYPE DURALOY[R] BRAND OVERALL DIMENSION 1-3/4 INCH W X 5/16 INCH H SCREW MATERIAL 316 STAINLESS STEEL USED ON CONDUIT BODY 7 MODEL
$
5.09
Qty:
Part #:OLK-1RG
- NEOPRENE MATERIAL UL, CSA APPROVAL SCREW ON COVER TYPE 1/2 INCH TRADE SIZE SERIES O FORM TYPE HUBBELL[R] BRAND O MODEL
$
8.43
Qty:
Part #:OLK-2RG
- NEOPRENE MATERIAL UL, CSA APPROVAL SCREW ON COVER TYPE 3/4 INCH TRADE SIZE SERIES O FORM TYPE HUBBELL[R] BRAND O MODEL
$
0.66
Qty:
$
82.71
Qty:
Part #:MTLAS78
- SHIP TYPE HEAT TREATED TOOL STEEL MATERIAL 6 INCH OVERALL LENGTH HEX SHANK TYPE 7/16 INCH SHANK SIZE NUMBER OF FLUTES 1 FLUTE TYPE TWIST WEIGHT 0.39 LB PACKAGING QUANTITY 1 BIT PER PACK INCLUSIONS/FEATURES DEEP THROAT FOR FAST CHIP REMOVAL, EXTRA HIGH QUALITY, DESIGNED FOR WOOD PRODUCT CONSTRUCTION DIAMETER 7/8 INCH DIAMETER - DECIMAL .875 DIAMETER - DECIMAL - UOM IN DIAMETER - FRACTIONAL 7/8
$
37.01
Qty:
Part #:MTLAL34
- SHIP TYPE HEAT TREATED TOOL STEEL MATERIAL 17 INCH OVERALL LENGTH HEX SHANK TYPE 7/16 INCH SHANK SIZE NUMBER OF FLUTES 1 FLUTE TYPE TWIST WEIGHT 0.91 LB PACKAGING QUANTITY 1 BIT PER PACK INCLUSIONS/FEATURES DEEP THROAT FOR FAST CHIP REMOVAL, EXTRA HIGH QUALITY, DESIGNED FOR WOOD PRODUCT CONSTRUCTION DIAMETER 3/4 INCH DIAMETER - DECIMAL .75 DIAMETER - DECIMAL - UOM IN DIAMETER - FRACTIONAL 3/4
$
47.23
Qty:
Part #:MTLJRM113
- SLOTTED/PHILLIPS TYPE STEEL MATERIAL ZINC CHROMATE FINISH 2 INCH #10 NOMINAL DIAMETER 32 TPI ROUND HEAD STYLE
$
0.05
Qty:
Part #:SBN12
- SILICON BRONZE MATERIAL 1/2 INCH NOMINAL DIAMETER 13 TPI METALLICS BRAND BOLT SIZE 1/2 INCH
$
238.94
Per Hundred
Qty:
Part #:OL-10
- SCREW TYPE COPPER FREE ALUMINUM MATERIAL 3 15/16 INCH UL, CSA APPROVAL 1/2 INCH TRADE SIZE KILLARK[R] BRAND SCREW MATERIAL STAINLESS STEEL WIDTH 1 3/8 INCH HEIGHT 3/8 INCH O MODEL
$
5.49
Qty:
Part #:OL-20
- SCREW TYPE COPPER FREE ALUMINUM MATERIAL 4 5/8 INCH UL, CSA APPROVAL 3/4 INCH TRADE SIZE KILLARK[R] BRAND SCREW MATERIAL STAINLESS STEEL WIDTH 1 5/8 INCH HEIGHT 3/8 INCH O MODEL
$
8.43
Qty:
Part #:OL-450
- SCREW TYPE COPPER FREE ALUMINUM MATERIAL 7 3/16 INCH UL, CSA APPROVAL 1 1/4 INCH TRADE SIZE KILLARK[R] BRAND SCREW MATERIAL STAINLESS STEEL WIDTH 2 5/8 INCH HEIGHT 5/8 INCH O MODEL
$
11.67
Qty:
Part #:OL-60
- SCREW TYPE COPPER FREE ALUMINUM MATERIAL 9 1/2 INCH UL, CSA APPROVAL 2 INCH TRADE SIZE KILLARK[R] BRAND SCREW MATERIAL STAINLESS STEEL WIDTH 3 1/8 INCH HEIGHT 5/8 INCH O MODEL
$
21.89
Qty:
Part #:ENY-2M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 3/4 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-9/32 INCH TURNING RADIUS HUBBELL[R] BRAND ENY MODEL
$
29.33
Qty:
Part #:KILL270
- SCREW TYPE STAMPED STEEL MATERIAL 4-1/4 INCH UL, CSA APPROVAL 3/4 INCH TRADE SIZE DURALOY[R] BRAND OVERALL DIMENSION 1-1/2 INCH W X 5/16 INCH H SCREW MATERIAL 316 STAINLESS STEEL USED ON CONDUIT BODY 7 MODEL
$
3.70
Qty:
Part #:KILL570
- SCREW TYPE STAMPED STEEL MATERIAL 6 INCH UL, CSA APPROVAL 1-1/2 INCH TRADE SIZE DURALOY[R] BRAND OVERALL DIMENSION 2-7/16 INCH W X 5/16 INCH H SCREW MATERIAL 316 STAINLESS STEEL USED ON CONDUIT BODY 7 MODEL
$
6.17
Qty:
Part #:KLRK870
- SCREW TYPE GALVANIZED STAMPED STEEL MATERIAL 9 INCH UL, CSA APPROVAL 2 1/2 INCH TRADE SIZE KILLARK[R] BRAND SCREW MATERIAL 316 STAINLESS STEEL WIDTH 4 1/4 INCH HEIGHT 9/16 INCH
$
17.20
Qty:
Part #:KILLUNY1
- MALE/FEMALE TYPE ZINC ELECTROPLATED STEEL MATERIAL 2-3/16 INCH UL 886, CSA C22.2 APPROVAL 1-1/2 INCH DIAMETER 1/2 INCH TRADE SIZE USED ON RIGID/IMC CONDUIT UNY MODEL
$
18.81
Qty:
Part #:KILLUNY2
- MALE/FEMALE TYPE ZINC ELECTROPLATED STEEL MATERIAL 2-3/8 INCH UL 886, CSA C22.2 APPROVAL 1-3/4 INCH DIAMETER 3/4 INCH TRADE SIZE USED ON RIGID/IMC CONDUIT UNY MODEL
$
36.96
Qty:
Part #:KLRKUNF2
- FEMALE/FEMALE TYPE ZINC ELECTROPLATED STEEL MATERIAL 1-15/16 INCH UL 886, CSA C22.2 APPROVAL 1-3/4 INCH DIAMETER 3/4 INCH TRADE SIZE .75 TRADE SIZE IN INCH HUBBELL[R] BRAND UNF MODEL
$
21.93
Qty:
Displaying: 1 - 24 of 65 Matching Items