Channel,Channel-Holes,Slots
Caps Unused Knockout Holes in Box or Enclosure
View:
Active Filters :
- Application: Caps Unused Knockout Holes in Box or Enclosure Channel,Channel-Holes,Slots Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To Non Metallic Cable Supports Rigid/imc Conduit to Mounting Surface
![3/4 NM CABLE CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN034.jpg)
Part #:RXCN034
- ZINC ELECTROPLATED STEEL MATERIAL (2) SCREW TILT-IN INSTALLATION ROMEX/NON-METALLIC CABLE CABLE TYPE (2) OR (3) 8 AWG, 6 AWG, 4 AWG CABLE SIZE 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE 3/4 INCH, 1 INCH KNOCKOUT SIZE NON-INSULATED THROAT TYPE
$
1.28
Qty:
![3/8 ROMEX CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN038.jpg)
Part #:RXCN038
- STRAIGHT TYPE DIE-CAST ZINC MATERIAL (2) SCREW INSTALLATION UL 514B APPROVAL 1000 STANDARD PACKAGE 3/8 INCH TRADE SIZE 1/2 INCH KNOCKOUT SIZE (2) 14 AWG, (2) 12 AWG CORD SIZE NON-INSULATED THROAT TYPE NON-METALLIC CABLE SINGLE CABLE OPENING
$
0.33
Qty:
![PVC NM CBL CONN 1 WIRE [Romex Connector, NM-B Connector]](https://southerntierelectricsupply.com/productimage/detail/ARLNM840.jpg)
Part #:ARLNM840
- STRAIGHT TYPE PVC MATERIAL 0.965 INCH OUTER DIAMETER X 1.406 INCH LENGTH SIZE UL, CSA APPROVAL 3/8 INCH THREAD SIZE KNOCKOUT SIZE 1/2
$
0.23
Qty:
Part #:ARLNM841
- STRAIGHT, PUSH-IN TYPE PLASTIC MATERIAL 1.125 INCH DIA X 1.34 INCH L SIZE UL, CSA APPROVAL 1/2 INCH THREAD SIZE PACKAGING QUANTITY 1000 PER PACK
$
0.40
Qty:
$
0.25
Qty:
Part #:TOP457
- GRAY PLASTIC MATERIAL SNAP-IN INSTALLATION NON-METALLIC CABLE CABLE TYPE (2) 14 AWG OR (2) 12 AWG CABLE SIZE UL APPROVAL 1000 PER CASE STANDARD PACKAGE 1/2 INCH KNOCKOUT SIZE ROHS COMPLIANT SIZE 1 INCH DIA
$
0.29
Qty:
$
1.45
Qty:
Part #:STRUTDEEPGAL14###################
- METAL FRAMING, SINGLE TYPE LOW CARBON STEEL MATERIAL PRE GALVANIZED FINISH 10 FT 1-5/8 INCH 1-5/8 INCH SLOTTED CONFIGURATION 14 GAUGE THICKNESS COLD FORMED PROCESS 1.442 LB/FT WEIGHT 2 INCH CENTER SPACING 1 CHANNEL(S) 9/16 INCH L X 7/8 INCH W HOLE/SLOT SIZE 1.419 INCH DEFLECTION 0.424 SQ INCH CROSS SECTION AREA 276 LB BEAM LOAD RATING 942 LB COLUMN LOAD RATING COLUMN LOAD RATING AT CENTER OF GRAVITY 1236 LB B24SH MODEL
$
231.80
Per Hundred FT
Qty:
Part #:KO100
- SNAP-IN TYPE STEEL MATERIAL 1 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 500
$
0.68
Qty:
Part #:G1H012
- 1-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.625 INCH IMC/RIGID CONDUIT USED ON 500 STANDARD PACKAGE 1/2 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.17
Qty:
Part #:KO012P
- SNAP-IN TYPE NYLON 6/6 MATERIAL UL APPROVAL 1/2 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 1000
$
0.47
Qty:
Part #:KO034P
- SNAP-IN TYPE NYLON 6/6 MATERIAL UL APPROVAL 3/4 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 500
$
0.78
Qty:
Part #:KO100P
- SNAP-IN TYPE NYLON 6/6 MATERIAL UL APPROVAL 1 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 500
$
1.30
Qty:
Part #:KO034
- SNAP-IN TYPE STEEL MATERIAL 3/4 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 500
$
0.37
Qty:
Part #:KO114
- SNAP-IN TYPE STEEL MATERIAL 1-1/4 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 250
$
0.65
Qty:
Part #:KO112
- SNAP-IN TYPE STEEL MATERIAL 1-1/2 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 250
$
1.34
Qty:
Part #:KO200
- SNAP-IN TYPE STEEL MATERIAL 2 INCH TRADE SIZE ROHS COMPLIANT PACKAGING QUANTITY 200
$
1.64
Qty:
Part #:G1H034
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.75 INCH IMC/RIGID CONDUIT USED ON 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.30
Qty:
Part #:G2H034
- 2-HOLE, SNAP-ON, RIBBED TYPE 20 GAUGE ZINC ELECTROPLATED COLD ROLLED STEEL MATERIAL 0.688 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE 0.188 INCH HOLE/BOLT SIZE
$
0.19
Qty:
Part #:G1H100
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.875 INCH IMC/RIGID CONDUIT USED ON 200 STANDARD PACKAGE 1 INCH TRADE SIZE 0.312 INCH HOLE/BOLT SIZE
$
0.45
Qty:
Part #:G1H114
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.875 INCH IMC/RIGID CONDUIT USED ON 100 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE 0.375 INCH HOLE/BOLT SIZE
$
0.68
Qty:
Part #:G1H112
- 1-HOLE, SNAP-ON, RIBBED TYPE 11 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 1 INCH IMC/RIGID CONDUIT USED ON 100 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 0.437 INCH HOLE/BOLT SIZE
$
1.01
Qty:
Part #:G1H200
- 1-HOLE, SNAP-ON, RIBBED TYPE 11 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 1.125 INCH IMC/RIGID CONDUIT USED ON 50 STANDARD PACKAGE 2 INCH TRADE SIZE 0.562 INCH HOLE/BOLT SIZE
$
1.02
Qty:
Displaying: 1 - 24 of 50 Matching Items