Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To
Channel,Channel-Holes,Slots
View:
Active Filters :
- Application: Channel,Channel-Holes,Slots Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To Connects Threadless Rigid/imc to Box or Enclosure Nm Cable Utility Box
![3/4 NM CABLE CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN034.jpg)
Part #:RXCN034
- ZINC ELECTROPLATED STEEL MATERIAL (2) SCREW TILT-IN INSTALLATION ROMEX/NON-METALLIC CABLE CABLE TYPE (2) OR (3) 8 AWG, 6 AWG, 4 AWG CABLE SIZE 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE 3/4 INCH, 1 INCH KNOCKOUT SIZE NON-INSULATED THROAT TYPE
$
1.28
Qty:
![3/8 ROMEX CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN038.jpg)
Part #:RXCN038
- STRAIGHT TYPE DIE-CAST ZINC MATERIAL (2) SCREW INSTALLATION UL 514B APPROVAL 1000 STANDARD PACKAGE 3/8 INCH TRADE SIZE 1/2 INCH KNOCKOUT SIZE (2) 14 AWG, (2) 12 AWG CORD SIZE NON-INSULATED THROAT TYPE NON-METALLIC CABLE SINGLE CABLE OPENING
$
0.33
Qty:
![PVC NM CBL CONN 1 WIRE [Romex Connector, NM-B Connector]](https://southerntierelectricsupply.com/productimage/detail/ARLNM840.jpg)
Part #:ARLNM840
- STRAIGHT TYPE PVC MATERIAL 0.965 INCH OUTER DIAMETER X 1.406 INCH LENGTH SIZE UL, CSA APPROVAL 3/8 INCH THREAD SIZE KNOCKOUT SIZE 1/2
$
0.23
Qty:
Part #:ARLNM841
- STRAIGHT, PUSH-IN TYPE PLASTIC MATERIAL 1.125 INCH DIA X 1.34 INCH L SIZE UL, CSA APPROVAL 1/2 INCH THREAD SIZE PACKAGING QUANTITY 1000 PER PACK
$
0.40
Qty:
$
0.25
Qty:
Part #:TOP457
- GRAY PLASTIC MATERIAL SNAP-IN INSTALLATION NON-METALLIC CABLE CABLE TYPE (2) 14 AWG OR (2) 12 AWG CABLE SIZE UL APPROVAL 1000 PER CASE STANDARD PACKAGE 1/2 INCH KNOCKOUT SIZE ROHS COMPLIANT SIZE 1 INCH DIA
$
0.29
Qty:
$
1.45
Qty:
Part #:CUTTP608
- FLAT TYPE STEEL MATERIAL CSA APPROVAL 100 STANDARD PACKAGE BLANK OPENING TYPE COOPER CROUSE-HINDS. BRAND
$
0.72
Qty:
Part #:STRUTDEEPGAL14###################
- METAL FRAMING, SINGLE TYPE LOW CARBON STEEL MATERIAL PRE GALVANIZED FINISH 10 FT 1-5/8 INCH 1-5/8 INCH SLOTTED CONFIGURATION 14 GAUGE THICKNESS COLD FORMED PROCESS 1.442 LB/FT WEIGHT 2 INCH CENTER SPACING 1 CHANNEL(S) 9/16 INCH L X 7/8 INCH W HOLE/SLOT SIZE 1.419 INCH DEFLECTION 0.424 SQ INCH CROSS SECTION AREA 276 LB BEAM LOAD RATING 942 LB COLUMN LOAD RATING COLUMN LOAD RATING AT CENTER OF GRAVITY 1236 LB B24SH MODEL
$
231.80
Per Hundred FT
Qty:
Part #:MTSSCN012
- SET SCREW, THREADLESS TYPE MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 100 STANDARD PACKAGE 1/2 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
3.08
Qty:
Part #:MTSSCN034
- SET SCREW, THREADLESS TYPE MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 100 STANDARD PACKAGE 3/4 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
4.29
Qty:
Part #:MTSSCN100
- SET SCREW, THREADLESS TYPE MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 25 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
6.99
Qty:
Part #:CUTTP613
- FLAT TYPE STEEL MATERIAL 1 GANG(S) UL, CSA APPROVAL 100 STANDARD PACKAGE (1) GFCI RECEPTACLE OPENING TYPE USED ON UTILITY BOX
$
1.28
Qty:
Part #:MTCMCN100
- COMPRESSION, THREADLESS TYPE ZINC PLATED MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 25 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB1
$
6.26
Qty:
Part #:MTCMCN112
- COMPRESSION, THREADLESS TYPE ZINC PLATED MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 10 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB1
$
15.39
Qty:
Part #:MTCMCN200
- COMPRESSION, THREADLESS TYPE ZINC PLATED MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 5 STANDARD PACKAGE 2 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB1
$
30.54
Qty:
Part #:CUTTP618
- FLAT TYPE STEEL MATERIAL 1 GANG(S) CSA APPROVAL 100 STANDARD PACKAGE (1) TOGGLE SWITCH OPENING TYPE COOPER CROUSE-HINDS. BRAND
$
0.79
Qty:
Part #:STRUTSHALLOWGAL14###############
- METAL FRAMING, SINGLE TYPE LOW CARBON STEEL MATERIAL PRE GALVANIZED ZINC FINISH 10 FT 1-5/8 INCH 13/16 INCH SLOTTED CONFIGURATION 14 GAUGE THICKNESS COLD FORMED PROCESS 0.91 LB/FT WEIGHT 2 INCH CENTER SPACING 1 CHANNEL(S) 7/8 INCH L X 9/16 W HOLE/SLOT SIZE 0.299 SQ INCH CROSS SECTION AREA B-LINE. BRAND STANDARD BUNDLE 500 FT B54 MODEL
$
182.40
Per Hundred FT
Qty:
Part #:CUTTP610
- FLAT TYPE STEEL MATERIAL 1 GANG(S) UL, CSA APPROVAL 100 STANDARD PACKAGE (1) 1-19/32 INCH DIA, 20 TO 30 AMPERE TWIST LOCKING RECEPTACLE OPENING TYPE USED ON UTILITY BOX
$
2.75
Qty:
Part #:CUTTP612
- FLAT TYPE STEEL MATERIAL 1 GANG(S) UL, CSA APPROVAL 100 STANDARD PACKAGE (1) 1-13/32 INCH DIA RECEPTACLE OPENING TYPE USED ON UTILITY BOX
$
0.83
Qty:
Part #:CUTTP614
- FLAT TYPE STEEL MATERIAL 2.125 INCH 0.25 INCH 1 GANG(S) UL, CSA APPROVAL 100 STANDARD PACKAGE (1) 1/2 INCH KNOCKOUT OPENING TYPE COOPER CROUSE-HINDS BRAND USED ON UTILITY BOX
$
1.47
Qty:
Part #:CUTTP616
- FLAT TYPE STEEL MATERIAL 1 GANG(S) CSA APPROVAL 100 STANDARD PACKAGE (1) DUPLEX RECEPTACLE OPENING TYPE COOPER CROUSE-HINDS. BRAND
$
0.83
Qty:
Part #:CUTTP588
- UTILITY TYPE STEEL MATERIAL 2-1/8 INCH 2.125 WIDTH IN INCH 4 INCH 4 HEIGHT IN INCH 1-1/2 INCH 1.5 DEPTH IN INCH 1 GANG(S) UL 514-A, UL 514-B, UL 514-C APPROVAL 50 STANDARD PACKAGE 10.3 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (8) 1/2 INCH SIDES KNOCKOUT SIZE 11 KNOCKOUT(S) (3) BOTTOM, (8) SIDE KNOCKOUT LOCATION COOPER CROUSE-HINDS. BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN
$
1.47
Qty:
Displaying: 1 - 24 of 36 Matching Items