Designed for General Purpose Indoor Commercial Use as a Junction, Pull or Switch Box
Channel,Channel-Holes,Slots
View:
Part #:CWDAHDS30
- NON-FUSED TYPE 8.75 INCH L X 5 INCH W X 5.68 INCH H SIZE PADLOCK HANDLE TYPE 3 PHASE(S) UL (CANADA AND US) APPROVAL CONTROL CIRCUIT APPLICATION 600 VAC VOLTAGE RATING NEMA 4X, 12, IP67 ENCLOSURE 30 AMPERE CURRENT RATING 3 POLE(S) 14 TO 10 AWG CONDUCTOR SIZE ROHS COMPLIANT MATERIAL THERMOPLASTIC
$
223.62
Qty:
$
357.98
Qty:
Part #:CWDAH7810UD
- 3-PHASE TYPE 1.69 INCH WIDTH X 1.75 INCH DEPTH X 3.28 INCH HEIGHT SIZE 3-POLE, 1-THROW OPERATION TYPE UL (CANADA AND US) APPROVAL 600 VOLT AC VOLTAGE RATING NEMA 1/3R/4X ENCLOSURE 30 AMP CURRENT RATING 7.5 HP AT 240 V 3 HP AT 120 V 15 HP AT 600 V 15 HP AT 480 V ROHS COMPLIANT WIRE SIZE 10 AWG APPLICATION INDUSTRIAL WIRING POSITION FRONT CONSTRUCTIONAL FEATURE CORROSION RESISTANCE
$
132.26
Qty:
$
128.58
Qty:
$
96.54
Qty:
Part #:CWDAH6810U
- 1-PHASE TYPE GLASS-FILLED NYLON MATERIAL 1.69 INCH W X 1.75 INCH D X 3.81 INCH H SIZE DPST OPERATION TYPE UL (CANADA AND US) APPROVAL 600 VAC VOLTAGE RATING 30 AMPERE CURRENT RATING 5 HP HP AT 240 V 2 HP HP AT 120 V 7.5 HP HP AT 600 V 7.5 HP HP AT 480 V ARROW HART[R] BRAND TERMINATION STYLE FRONT WIRED SCREW WIRE SIZE 10 AWG ROHS COMPLIANT NAFTA COMPLIANT
$
88.16
Qty:
Part #:CWDAHMC240C
- Man Cont 2Pos DPST 40A 600VAC Clamp BK 3653884
$
90.50
Qty:
Part #:ON034
- THREADED MALE, 3/4 INCH OFFSET TYPE DIE-CAST ZINC MATERIAL RIGID CONDUIT USED ON UL 514B APPROVAL 100 STANDARD PACKAGE 3/4 INCH TRADE SIZE NON-INSULATED THROAT TYPE
$
4.05
Qty:
Part #:ON112
- THREADED MALE, 3/4 INCH OFFSET TYPE DIE-CAST ZINC MATERIAL RIGID CONDUIT USED ON UL 514B APPROVAL 50 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE NON-INSULATED THROAT TYPE
$
8.75
Qty:
Part #:ON200
- THREADED MALE, 3/4 INCH OFFSET TYPE DIE-CAST ZINC MATERIAL RIGID CONDUIT USED ON UL 514B APPROVAL 20 STANDARD PACKAGE 2 INCH TRADE SIZE NON-INSULATED THROAT TYPE
$
8.50
Qty:
Part #:HAMCS664
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 6 INCH 6 INCH 4 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
13.24
Qty:
Part #:HAMCS884
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 8 INCH 8 INCH 4 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
18.72
Qty:
Part #:HAMCS886
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 8 INCH 8 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
23.27
Qty:
Part #:HAMCSKO664
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 6 INCH 6 INCH 4 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 16/14 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE (2) (1/2 INCH-3/4 INCH), (1) (3/4 INCH-1 INCH) CONCENTRIC KNOCKOUT TOP/BOTTOM/SIDES KNOCKOUT SIZE 12 KNOCKOUT(S) (3) TOP, (3) BOTTOM, (6) SIDES KNOCKOUT LOCATION ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CSKO MODEL
$
13.24
Qty:
Part #:BLINB22SH-120GLV
- METAL FRAMING, SINGLE TYPE ASTM A653 LOW CARBON STEEL MATERIAL PRE-GALVANIZED FINISH 120 INCH 1-5/8 INCH 1-5/8 INCH SLOTTED CONFIGURATION 12 GAUGE THICKNESS COLD/ROLL FORMED PROCESS 1.82 POUND PER FOOT WEIGHT 2 INCH CENTER SPACING 1 CHANNEL(S) 1-1/8 INCH LENGTH X 9/16 INCH WIDTH HOLE/SLOT SIZE 1.403 INCH DEFLECTION 0.562 SQUARE INCH CROSS SECTION AREA 340 POUND BEAM LOAD RATING 2680 POUND (0.65 LOAD FACTOR) COLUMN LOAD RATING COOPER B-LINE BRAND B22SH MODEL
$
1.84
FT
Qty:
Part #:ON012
- THREADED MALE, 3/4 INCH OFFSET TYPE DIE-CAST ZINC MATERIAL RIGID CONDUIT USED ON UL 514B APPROVAL 100 STANDARD PACKAGE 1/2 INCH TRADE SIZE NON-INSULATED THROAT TYPE
$
3.72
Qty:
Part #:ON100
- THREADED MALE, 3/4 INCH OFFSET TYPE DIE-CAST ZINC MATERIAL RIGID CONDUIT USED ON UL 514B APPROVAL 100 STANDARD PACKAGE 1 INCH TRADE SIZE NON-INSULATED THROAT TYPE
$
8.81
Qty:
Part #:ON114
- THREADED MALE, 3/4 INCH OFFSET TYPE DIE-CAST ZINC MATERIAL RIGID CONDUIT USED ON UL 514B APPROVAL 50 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE NON-INSULATED THROAT TYPE
$
6.72
Qty:
Part #:HAMCS10106
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 10 INCH 10 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
29.97
Qty:
Part #:HAMCS12126
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 12 INCH 12 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
38.49
Qty:
Part #:HAMCS18186
- FORMED SPOT WELDED STEEL MATERIAL POWDER COATED FINISH ANSI 61 GRAY COLOR 18 INCH 18 INCH 6 INCH UL 50, UL, CSA APPROVAL WALL MOUNTING NEMA 1, IP20 ENCLOSURE SCREW-ON, LIFT-OFF COVER TYPE 12/14/16 GAUGE MATERIAL SPECIFICATION INDOOR SERVICE TYPE ROHS COMPLIANT APPLICABLE STANDARD IEC 60529 CS MODEL
$
67.54
Qty:
Displaying: 1 - 24 of 30 Matching Items