Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To
Circuit Protection
View:
Active Filters :
- Application: Circuit Protection Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To Elec Assemblies, Panels & Eoem - Electrical Assemblies, Panels and Eoems Tap Connector / Grounding Connector Utility Box
$
33.14
Qty:
Part #:CUTTP608
- FLAT TYPE STEEL MATERIAL CSA APPROVAL 100 STANDARD PACKAGE BLANK OPENING TYPE COOPER CROUSE-HINDS. BRAND
$
0.72
Qty:
Part #:CUTTP613
- FLAT TYPE STEEL MATERIAL 1 GANG(S) UL, CSA APPROVAL 100 STANDARD PACKAGE (1) GFCI RECEPTACLE OPENING TYPE USED ON UTILITY BOX
$
1.28
Qty:
Part #:CUTTP618
- FLAT TYPE STEEL MATERIAL 1 GANG(S) CSA APPROVAL 100 STANDARD PACKAGE (1) TOGGLE SWITCH OPENING TYPE COOPER CROUSE-HINDS. BRAND
$
0.79
Qty:
Part #:SIEQ120
- LOADCENTER USED ON 120 VAC VOLTAGE RATING PLUG IN MOUNTING 10 KILOAMPERE INTERRUPTING RATING 20 AMPERE AT 40 DEG C CURRENT RATING 1 POLE(S) QP MODEL
$
12.49
Qty:
Part #:SIEQ2100
- COMMON TRIP TYPE LOADCENTER USED ON 120/240 VAC VOLTAGE RATING PLUG IN MOUNTING 10 KILOAMPERE INTERRUPTING RATING 100 AMPERE AT 40 DEG C CURRENT RATING 2 POLE(S) QP MODEL
$
49.98
Qty:
Part #:CUTTP610
- FLAT TYPE STEEL MATERIAL 1 GANG(S) UL, CSA APPROVAL 100 STANDARD PACKAGE (1) 1-19/32 INCH DIA, 20 TO 30 AMPERE TWIST LOCKING RECEPTACLE OPENING TYPE USED ON UTILITY BOX
$
2.75
Qty:
Part #:CUTTP612
- FLAT TYPE STEEL MATERIAL 1 GANG(S) UL, CSA APPROVAL 100 STANDARD PACKAGE (1) 1-13/32 INCH DIA RECEPTACLE OPENING TYPE USED ON UTILITY BOX
$
0.83
Qty:
Part #:CUTTP614
- FLAT TYPE STEEL MATERIAL 2.125 INCH 0.25 INCH 1 GANG(S) UL, CSA APPROVAL 100 STANDARD PACKAGE (1) 1/2 INCH KNOCKOUT OPENING TYPE COOPER CROUSE-HINDS BRAND USED ON UTILITY BOX
$
1.47
Qty:
Part #:CUTTP616
- FLAT TYPE STEEL MATERIAL 1 GANG(S) CSA APPROVAL 100 STANDARD PACKAGE (1) DUPLEX RECEPTACLE OPENING TYPE COOPER CROUSE-HINDS. BRAND
$
0.83
Qty:
Part #:CUTTP588
- UTILITY TYPE STEEL MATERIAL 2-1/8 INCH 2.125 WIDTH IN INCH 4 INCH 4 HEIGHT IN INCH 1-1/2 INCH 1.5 DEPTH IN INCH 1 GANG(S) UL 514-A, UL 514-B, UL 514-C APPROVAL 50 STANDARD PACKAGE 10.3 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (8) 1/2 INCH SIDES KNOCKOUT SIZE 11 KNOCKOUT(S) (3) BOTTOM, (8) SIDE KNOCKOUT LOCATION COOPER CROUSE-HINDS. BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN
$
1.47
Qty:
Part #:CUTTP594
- UTILITY TYPE STEEL MATERIAL 2-1/8 INCH 4 INCH 1-7/8 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL 50 STANDARD PACKAGE 13 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (8) 1/2 INCH SIDE KNOCKOUT SIZE 11 KNOCKOUT(S) (3) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
1.82
Qty:
Part #:CUTTP596
- UTILITY TYPE STEEL MATERIAL 2-1/8 INCH 4 INCH 1-7/8 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL 50 STANDARD PACKAGE 13 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (6) 3/4 INCH SIDE KNOCKOUT SIZE 9 KNOCKOUT(S) (3) BOTTOM, (6) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
4.10
Qty:
Part #:CUTTP604
- UTILITY TYPE STEEL MATERIAL 2-1/8 INCH 4 INCH 2-1/8 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL 50 STANDARD PACKAGE 14.5 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (8) 1/2 INCH SIDE KNOCKOUT SIZE 11 KNOCKOUT(S) (3) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
2.30
Qty:
Part #:CUTTP592
- STEEL MATERIAL 2-1/8 INCH 4 INCH 1-1/2 INCH 1 GANG(S) UL APPROVAL 50 STANDARD PACKAGE 10.3 CU INCH CAPACITY (8) 1/2 INCH KNOCKOUT SIZE 8 KNOCKOUT(S) (8) SIDE KNOCKOUT LOCATION
$
6.02
Qty:
Part #:CUTCH220GFT
- COMMON TRIP THERMAL MAGNETIC TYPE LOADCENTER USED ON 14 TO 6 AWG (ALUMINUM/COPPER) WIRE SIZE UL 489 CSA APPROVAL 120/240 VAC VOLTAGE RATING PLUG ON MOUNTING 10000 AMPERE INTERRUPTING RATING 20 AMPERE CURRENT RATING 2 POLE(S) 5 MILLIAMPERE TRIP SENSITIVITY CH MODEL
Qty:
Part #:CUTCH230GFT
- COMMON TRIP THERMAL MAGNETIC TYPE LOADCENTER USED ON 14 TO 6 AWG (ALUMINUM/COPPER) WIRE SIZE UL 489 CSA APPROVAL 120/240 VAC VOLTAGE RATING PLUG ON MOUNTING 10000 AMPERE INTERRUPTING RATING 30 AMPERE CURRENT RATING 2 POLE(S) 5 MILLIAMPERE TRIP SENSITIVITY CH MODEL
Qty:
Part #:ENY-2M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 3/4 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-9/32 INCH TURNING RADIUS HUBBELL[R] BRAND ENY MODEL
$
29.33
Qty:
Part #:SIEBQ1B020
- MOLDED CASE, THERMAL MAGNETIC TYPE 1 INCH W X 3 INCH D X 3-3/4 INCH H SIZE 240 MAX. AC VOLTAGE RATING 120/240 VAC AT 60 HZ VOLTAGE RATING 10 KILOAMPERE INTERRUPTING RATING 20 AMPERE AT 40 DEG C CURRENT RATING 1 POLE(S) LOAD LUG TERMINAL TYPE BQ FRAME TYPE BQ MODEL
$
50.11
Qty:
Part #:SIEQ115
- LOADCENTER USED ON 120 VAC VOLTAGE RATING PLUG IN MOUNTING 10 KILOAMPERE INTERRUPTING RATING 15 AMPERE AT 40 DEG C CURRENT RATING 1 POLE(S) QP MODEL
$
11.84
Qty:
Part #:SIEQ1515
- MOLDED CASE, THERMAL MAGNETIC TYPE 1 INCH W X 2.06 INCH D X 3.12 INCH H SIZE 240 MAX. AC VOLTAGE RATING 120/240 VAC AT 60 HZ (UL) VOLTAGE RATING 10 KILOAMPERE AT 120/240 VAC (UL) INTERRUPTING RATING 15 AMPERE CURRENT RATING 1 POLE(S) SPEEDFAX[T] BRAND
$
19.94
Qty:
Part #:SIEQ1515NC
- DUPLEX TYPE LOADCENTER USED ON 120 VAC VOLTAGE RATING PLUG IN MOUNTING 10 KILOAMPERE INTERRUPTING RATING 15 AMPERE CURRENT RATING 1 POLE(S) QT MODEL
$
43.75
Qty:
Displaying: 1 - 24 of 54 Matching Items