Conduit
Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To
View:
Active Filters :
- Application: Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To Conduit Nm/seu Cable Reduces the Size of Knockout Holes
![3/8 ROMEX CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN038.jpg)
Part #:RXCN038
- STRAIGHT TYPE DIE-CAST ZINC MATERIAL (2) SCREW INSTALLATION UL 514B APPROVAL 1000 STANDARD PACKAGE 3/8 INCH TRADE SIZE 1/2 INCH KNOCKOUT SIZE (2) 14 AWG, (2) 12 AWG CORD SIZE NON-INSULATED THROAT TYPE NON-METALLIC CABLE SINGLE CABLE OPENING
$
0.33
Qty:
![3/4 NM CABLE CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN034.jpg)
Part #:RXCN034
- ZINC ELECTROPLATED STEEL MATERIAL (2) SCREW TILT-IN INSTALLATION ROMEX/NON-METALLIC CABLE CABLE TYPE (2) OR (3) 8 AWG, 6 AWG, 4 AWG CABLE SIZE 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE 3/4 INCH, 1 INCH KNOCKOUT SIZE NON-INSULATED THROAT TYPE
$
1.28
Qty:
![PVC NM CBL CONN 1 WIRE [Romex Connector, NM-B Connector]](https://southerntierelectricsupply.com/productimage/detail/ARLNM840.jpg)
Part #:ARLNM840
- STRAIGHT TYPE PVC MATERIAL 0.965 INCH OUTER DIAMETER X 1.406 INCH LENGTH SIZE UL, CSA APPROVAL 3/8 INCH THREAD SIZE KNOCKOUT SIZE 1/2
$
0.23
Qty:
Part #:ARLNM841
- STRAIGHT, PUSH-IN TYPE PLASTIC MATERIAL 1.125 INCH DIA X 1.34 INCH L SIZE UL, CSA APPROVAL 1/2 INCH THREAD SIZE PACKAGING QUANTITY 1000 PER PACK
$
0.40
Qty:
$
0.25
Qty:
Part #:TOP457
- GRAY PLASTIC MATERIAL SNAP-IN INSTALLATION NON-METALLIC CABLE CABLE TYPE (2) 14 AWG OR (2) 12 AWG CABLE SIZE UL APPROVAL 1000 PER CASE STANDARD PACKAGE 1/2 INCH KNOCKOUT SIZE ROHS COMPLIANT SIZE 1 INCH DIA
$
0.29
Qty:
$
1.45
Qty:
Part #:CUTTP432
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (8) 3/4 INCH SIDE KNOCKOUT SIZE 12 KNOCKOUT(S) (4) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
8.09
Qty:
Part #:CUTTP451
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (6) 1/2 INCH SIDE, (3) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (4) BOTTOM, (9) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.75
Qty:
Part #:RW034X012
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1/2 INCH SMALL END TRADE SIZE 3/4 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.20
Qty:
Part #:RW100X012
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1/2 INCH SMALL END TRADE SIZE 1 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.33
Qty:
Part #:RW100X034
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 3/4 INCH SMALL END TRADE SIZE 1 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.33
Qty:
Part #:RW114X034
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 3/4 INCH SMALL END TRADE SIZE 1-1/4 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.71
Qty:
Part #:RW114X100
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1 INCH SMALL END TRADE SIZE 1-1/4 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.71
Qty:
Part #:RW112X012
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1/2 INCH SMALL END TRADE SIZE 1-1/2 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.93
Qty:
Part #:RW112X034
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 3/4 INCH SMALL END TRADE SIZE 1-1/2 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.93
Qty:
Part #:RW112X100
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1 INCH SMALL END TRADE SIZE 1-1/2 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.87
Qty:
Part #:RW112X114
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1-1/4 INCH SMALL END TRADE SIZE 1-1/2 INCH LARGE END TRADE SIZE 1000 STANDARD PACKAGE
$
0.87
Qty:
Part #:RW200X012
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1/2 INCH SMALL END TRADE SIZE 2 INCH LARGE END TRADE SIZE 500 STANDARD PACKAGE
$
1.18
Qty:
Part #:RW200X034
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 3/4 INCH SMALL END TRADE SIZE 2 INCH LARGE END TRADE SIZE 500 STANDARD PACKAGE
$
1.29
Qty:
Part #:RW200X114
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1-1/4 INCH SMALL END TRADE SIZE 2 INCH LARGE END TRADE SIZE 500 STANDARD PACKAGE
$
1.16
Qty:
Part #:RW200X112
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1-1/2 INCH SMALL END TRADE SIZE 2 INCH LARGE END TRADE SIZE 500 STANDARD PACKAGE
$
1.16
Qty:
Part #:RW212X012
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1/2 INCH SMALL END TRADE SIZE 2-1/2 INCH LARGE END TRADE SIZE 500 STANDARD PACKAGE
$
2.99
Qty:
Displaying: 1 - 24 of 66 Matching Items