Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To
4-11/16 in Square Box
View:
Active Filters :
- Application: 4-11/16 in Square Box Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To Connects Threadless Rigid/imc to Box or Enclosure Nonmetallic Cable
![3/4 NM CABLE CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN034.jpg)
Part #:RXCN034
- ZINC ELECTROPLATED STEEL MATERIAL (2) SCREW TILT-IN INSTALLATION ROMEX/NON-METALLIC CABLE CABLE TYPE (2) OR (3) 8 AWG, 6 AWG, 4 AWG CABLE SIZE 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE 3/4 INCH, 1 INCH KNOCKOUT SIZE NON-INSULATED THROAT TYPE
$
1.28
Qty:
![3/8 ROMEX CONNECTOR [2-screw connector]](https://southerntierelectricsupply.com/productimage/detail/RXCN038.jpg)
Part #:RXCN038
- STRAIGHT TYPE DIE-CAST ZINC MATERIAL (2) SCREW INSTALLATION UL 514B APPROVAL 1000 STANDARD PACKAGE 3/8 INCH TRADE SIZE 1/2 INCH KNOCKOUT SIZE (2) 14 AWG, (2) 12 AWG CORD SIZE NON-INSULATED THROAT TYPE NON-METALLIC CABLE SINGLE CABLE OPENING
$
0.33
Qty:
![PVC NM CBL CONN 1 WIRE [Romex Connector, NM-B Connector]](https://southerntierelectricsupply.com/productimage/detail/ARLNM840.jpg)
Part #:ARLNM840
- STRAIGHT TYPE PVC MATERIAL 0.965 INCH OUTER DIAMETER X 1.406 INCH LENGTH SIZE UL, CSA APPROVAL 3/8 INCH THREAD SIZE KNOCKOUT SIZE 1/2
$
0.23
Qty:
Part #:ARLNM841
- STRAIGHT, PUSH-IN TYPE PLASTIC MATERIAL 1.125 INCH DIA X 1.34 INCH L SIZE UL, CSA APPROVAL 1/2 INCH THREAD SIZE PACKAGING QUANTITY 1000 PER PACK
$
0.40
Qty:
$
0.25
Qty:
Part #:TOP457
- GRAY PLASTIC MATERIAL SNAP-IN INSTALLATION NON-METALLIC CABLE CABLE TYPE (2) 14 AWG OR (2) 12 AWG CABLE SIZE UL APPROVAL 1000 PER CASE STANDARD PACKAGE 1/2 INCH KNOCKOUT SIZE ROHS COMPLIANT SIZE 1 INCH DIA
$
0.29
Qty:
$
1.45
Qty:
Part #:CUTTP568
- FLAT TYPE STEEL MATERIAL UL, CSA APPROVAL 25 STANDARD PACKAGE 4-11/16 INCH BOX SIZE BLANK OPENING TYPE
$
0.98
Qty:
Part #:CUTTP576
- RAISED TYPE STEEL MATERIAL UL APPROVAL 25 STANDARD PACKAGE 3.3 CU INCH CAPACITY 4-11/16 INCH BOX SIZE (1) DEVICE OPENING TYPE 1/2 INCH RAISED ROUNDED CORNER TYPE NUMBER OF GANGS 1
$
2.86
Qty:
Part #:CUTTP579
- RAISED TYPE STEEL MATERIAL UL APPROVAL 25 STANDARD PACKAGE 4.3 CU INCH CAPACITY 4-11/16 INCH BOX SIZE (1) DEVICE OPENING TYPE 5/8 INCH RAISED ROUNDED CORNER TYPE NUMBER OF GANGS 1
$
2.95
Qty:
Part #:MTSSCN012
- SET SCREW, THREADLESS TYPE MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 100 STANDARD PACKAGE 1/2 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
3.08
Qty:
Part #:MTSSCN034
- SET SCREW, THREADLESS TYPE MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 100 STANDARD PACKAGE 3/4 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
4.29
Qty:
Part #:MTSSCN100
- SET SCREW, THREADLESS TYPE MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 25 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE
$
6.99
Qty:
Part #:CUTTP587
- RAISED TYPE STEEL MATERIAL UL APPROVAL 25 STANDARD PACKAGE 8 CU INCH CAPACITY 4-11/16 INCH BOX SIZE (2) DEVICE OPENING TYPE 5/8 INCH RAISED NUMBER OF GANGS 2
$
3.65
Qty:
Part #:CUTTP302
- STEEL MATERIAL 1-1/2 INCH OCTAGON SHAPE UL 514A/514B/514C APPROVAL 4 INCH DIAMETER C BRACKET MOUNTING 50 STANDARD PACKAGE 15.5 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (2) 1/2 INCH SIDE KNOCKOUT SIZE 7 KNOCKOUT(S) (1) BOTTOM, (2) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
7.10
Qty:
Part #:MTCMCN100
- COMPRESSION, THREADLESS TYPE ZINC PLATED MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 25 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB1
$
6.26
Qty:
Part #:MTCMCN112
- COMPRESSION, THREADLESS TYPE ZINC PLATED MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 10 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB1
$
15.39
Qty:
Part #:MTCMCN200
- COMPRESSION, THREADLESS TYPE ZINC PLATED MALLEABLE IRON MATERIAL IMC/RIGID CONDUIT USED ON UL APPROVAL 5 STANDARD PACKAGE 2 INCH TRADE SIZE CONCRETE-TIGHT NON-INSULATED THROAT TYPE ROHS COMPLIANT APPLICABLE STANDARD FEDERAL SPECIFICATION W-F-408E, NEMA FB1
$
30.54
Qty:
Part #:CUTTP452
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (2) 1/2 INCH SIDE, (1) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 8 KNOCKOUT(S) (1) BOTTOM, (3) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
5.70
Qty:
Part #:CUTTP298
- STEEL MATERIAL 1-1/2 INCH OCTAGON SHAPE UL 514A/514B/514C APPROVAL 4 INCH DIAMETER 50 STANDARD PACKAGE 15.5 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (2) 1/2 INCH SIDE KNOCKOUT SIZE 7 KNOCKOUT(S) (1) BOTTOM, (2) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.12
Qty:
Part #:CUTTP316
- STEEL MATERIAL 2-1/8 INCH OCTAGON SHAPE UL 514A/514B/514C APPROVAL 4 INCH DIAMETER 25 STANDARD PACKAGE 21.5 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (2) 1/2 INCH SIDE KNOCKOUT SIZE 7 KNOCKOUT(S) (1) BOTTOM, (2) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
8.25
Qty:
Part #:CUTTP450
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (4) 1/2 INCH SIDE, (2) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 11 KNOCKOUT(S) (1) BOTTOM, (6) SIDE,(4) CABLE SIDE KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
8.03
Qty:
Part #:CUTTP318
- STEEL MATERIAL 2-1/8 INCH OCTAGON SHAPE UL 514A/514B/514C APPROVAL 4 INCH DIAMETER C BRACKET MOUNTING 25 STANDARD PACKAGE 21.5 CU INCH CAPACITY (1) 1/2 INCH BOTTOM, (4) CABLE SIDE, (2) 1/2 INCH SIDE KNOCKOUT SIZE 7 KNOCKOUT(S) (1) BOTTOM, (2) SIDE, (4) CABLE SIDE KNOCKOUT LOCATION NON-METALLIC CABLE CLAMP TYPE APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
6.44
Qty:
Displaying: 1 - 24 of 36 Matching Items