Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To
4 in Square Box
View:
Active Filters :
- Application: 4 in Square Box Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To For Steel, Steel Forging, Cast Iron and Other Work Materials Supports Emt Conduit to Mounting Surface Tap Connector / Grounding Connector
Part #:CUTTP472
- FLAT TYPE STEEL MATERIAL UL APPROVAL 50 STANDARD PACKAGE 4 INCH BOX SIZE BLANK OPENING TYPE COVER THICKNESS 0.063 INCH
$
0.95
Qty:
Part #:CUTTP512
- RAISED TYPE STEEL MATERIAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (1) TOGGLE SWITCH OPENING TYPE 1/2 INCH RAISED COOPER CROUSE-HINDS. BRAND
$
1.84
Qty:
Part #:CUTTP516
- RAISED TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 5.5 CUBIC INCH CAPACITY 4 INCH DEPTH BOX SIZE (1) DUPLEX RECEPTACLE OPENING TYPE 1/2 INCH RAISED
$
1.62
Qty:
Part #:CUTTP508
- RAISED TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (2) TOGGLE SWITCH OPENING TYPE 1/2 INCH RAISED
$
2.06
Qty:
Part #:CUTTP510
- RAISED TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (2) DUPLEX RECEPTACLE OPENING TYPE 1/2 INCH RAISED
$
1.96
Qty:
Part #:CUTTP506
- RAISED TYPE STEEL MATERIAL 50 STANDARD PACKAGE 5.5 CU INCH CAPACITY 4 INCH BOX SIZE (1) DUPLEX RECEPTACLE, (1) TOGGLE SWITCH OPENING TYPE 1/2 INCH RAISED COOPER CROUSE-HINDS. BRAND
$
2.18
Qty:
Part #:E1H012
- 1-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.562 INCH EMT CONDUIT USED ON UL APPROVAL 1000 STANDARD PACKAGE 1/2 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.12
Qty:
Part #:E1H100
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.75 INCH EMT CONDUIT USED ON UL APPROVAL 500 STANDARD PACKAGE 1 INCH TRADE SIZE 0.312 INCH HOLE/BOLT SIZE
$
0.27
Qty:
Part #:E1H114
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.875 INCH EMT CONDUIT USED ON 200 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE 0.312 INCH HOLE/BOLT SIZE
$
0.44
Qty:
Part #:E1H112
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 1 INCH EMT CONDUIT USED ON 100 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 0.312 INCH HOLE/BOLT SIZE
$
0.95
Qty:
Part #:E1H200
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 1.125 INCH EMT CONDUIT USED ON 100 STANDARD PACKAGE 2 INCH TRADE SIZE 0.375 INCH HOLE/BOLT SIZE
$
0.95
Qty:
Part #:E2H034
- 2-HOLE, SNAP-ON, RIBBED TYPE 20 GAUGE ZINC ELECTROPLATED COLD ROLLED STEEL MATERIAL 0.625 INCH EMT CONDUIT USED ON UL (CANADA AND US) APPROVAL 500 STANDARD PACKAGE 3/4 INCH TRADE SIZE 0.188 INCH HOLE/BOLT SIZE
$
0.15
Qty:
Part #:E2H100
- 2-HOLE, SNAP-ON, RIBBED TYPE 20 GAUGE ZINC ELECTROPLATED COLD ROLLED STEEL MATERIAL 0.688 INCH EMT CONDUIT USED ON UL (CANADA AND US) APPROVAL 250 STANDARD PACKAGE 1 INCH TRADE SIZE 0.188 INCH HOLE/BOLT SIZE
$
0.25
Qty:
Part #:E2H114
- 2-HOLE, SNAP-ON, RIBBED TYPE 18 GAUGE GALVANIZED STEEL MATERIAL 0.75 INCH EMT CONDUIT USED ON UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.72
Qty:
Part #:E2H200
- 2-HOLE, SNAP-ON, RIBBED TYPE 20 GAUGE ZINC ELECTROPLATED COLD ROLLED STEEL MATERIAL 0.56 INCH EMT CONDUIT USED ON UL (CANADA AND US) APPROVAL 500 STANDARD PACKAGE 1/2 INCH TRADE SIZE 0.188 INCH HOLE/BOLT SIZE
$
0.66
Qty:
Part #:CUTTP476
- RAISED TYPE STEEL MATERIAL UL, CSA APPROVAL 50 STANDARD PACKAGE 4 CU INCH CAPACITY 4 INCH BOX SIZE ROUND WITH EARS 2-3/4 INCH ON CENTER OPENING TYPE 1/2 INCH RAISED NO CORNER CORNER TYPE
$
1.39
Qty:
Part #:CUTTP478
- FLAT TYPE STEEL MATERIAL UL APPROVAL 50 STANDARD PACKAGE 4 INCH BOX SIZE 1/2 INCH KNOCKOUT OPENING TYPE APPLICABLE STANDARD NEC 370
$
1.31
Qty:
Part #:E1H034
- 1-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.625 INCH EMT CONDUIT USED ON UL APPROVAL 500 STANDARD PACKAGE 3/4 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.16
Qty:
Part #:E2H112
- 2-HOLE, SNAP-ON, RIBBED TYPE 18 GAUGE GALVANIZED STEEL MATERIAL 0.875 INCH EMT CONDUIT USED ON UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.45
Qty:
Part #:DOTHS14C
- JOBBER LENGTH TYPE HSS MATERIAL BLACK, GOLD FINISH 3-3/4 INCH OVERALL LENGTH 3/16 INCH FLUTE LENGTH FLATTED SHANK TYPE HEAVY DUTY CONSTRUCTION 4 FLUTE(S) 7/32 INCH DRILL SIZE 135 DEGREE POINT ANGLE HS MODEL
$
3.31
Qty:
Part #:DOTHS28C
- JOBBER LENGTH TYPE HSS MATERIAL BLACK, GOLD FINISH 5-1/2 INCH OVERALL LENGTH 3/16 INCH FLUTE LENGTH FLATTED SHANK TYPE HEAVY DUTY CONSTRUCTION 4 FLUTE(S) 7/16 INCH DRILL SIZE 135 DEGREE POINT ANGLE HS MODEL
$
7.04
Qty:
Part #:ENY-2M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 3/4 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-9/32 INCH TURNING RADIUS HUBBELL[R] BRAND ENY MODEL
$
29.33
Qty:
Part #:ENY-1M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE THREADED, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 1/2 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-3/16 INCH TURNING RADIUS OVERALL DIMENSION 3-15/16 INCH H ENY MODEL
$
24.98
Qty:
Displaying: 1 - 24 of 38 Matching Items