Motor Control Swtch & Dis
Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To
View:
Active Filters :
- Application: Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To Motor Control Swtch & Dis Pin & Sleeve Products Supports Rigid/imc Conduit to Mounting Surface Tap Connector / Grounding Connector
Part #:CWDAH416P6W
- Plug Pin&Sleeve 16A 380-415V 3P4W WT RD 4732218
$
116.92
Qty:
Part #:CWDAH460P7W
- Plug Pin&Sleeve 60A 480V 3PH 3P4W WT RD 4732478
$
362.60
Qty:
Part #:CWDAHDS30
- NON-FUSED TYPE 8.75 INCH L X 5 INCH W X 5.68 INCH H SIZE PADLOCK HANDLE TYPE 3 PHASE(S) UL (CANADA AND US) APPROVAL CONTROL CIRCUIT APPLICATION 600 VAC VOLTAGE RATING NEMA 4X, 12, IP67 ENCLOSURE 30 AMPERE CURRENT RATING 3 POLE(S) 14 TO 10 AWG CONDUCTOR SIZE ROHS COMPLIANT MATERIAL THERMOPLASTIC
$
223.62
Qty:
$
357.98
Qty:
Part #:CWDAH7810UD
- 3-PHASE TYPE 1.69 INCH WIDTH X 1.75 INCH DEPTH X 3.28 INCH HEIGHT SIZE 3-POLE, 1-THROW OPERATION TYPE UL (CANADA AND US) APPROVAL 600 VOLT AC VOLTAGE RATING NEMA 1/3R/4X ENCLOSURE 30 AMP CURRENT RATING 7.5 HP AT 240 V 3 HP AT 120 V 15 HP AT 600 V 15 HP AT 480 V ROHS COMPLIANT WIRE SIZE 10 AWG APPLICATION INDUSTRIAL WIRING POSITION FRONT CONSTRUCTIONAL FEATURE CORROSION RESISTANCE
$
132.26
Qty:
$
128.58
Qty:
$
96.54
Qty:
Part #:CWDAH6810U
- 1-PHASE TYPE GLASS-FILLED NYLON MATERIAL 1.69 INCH W X 1.75 INCH D X 3.81 INCH H SIZE DPST OPERATION TYPE UL (CANADA AND US) APPROVAL 600 VAC VOLTAGE RATING 30 AMPERE CURRENT RATING 5 HP HP AT 240 V 2 HP HP AT 120 V 7.5 HP HP AT 600 V 7.5 HP HP AT 480 V ARROW HART[R] BRAND TERMINATION STYLE FRONT WIRED SCREW WIRE SIZE 10 AWG ROHS COMPLIANT NAFTA COMPLIANT
$
88.16
Qty:
Part #:CWDAH460C7W
- Conn Pin&Sleeve 60A 480V 3PH 3P4W WT RD 3619804
$
399.60
Qty:
Part #:CWDAH460C9W
- NYLON PA6 MATERIAL 0.66 INCH MIN. CABLE OUTER DIAMETER 1.5 INCH MAX. CABLE OUTER DIAMETER 4 WIRE(S) UL 498, UL 1682, UL 1686, CSA C22.2 APPROVAL 250 VAC 3-PHASE VOLTAGE RATING 60 AMPERE CURRENT RATING 3 POLE(S) CORROSION RESISTANT, DUSTTIGHT, WATERTIGHT ARROW HART[R] BRAND APPLICABLE STANDARD IEC 60309-1/60309-2 FLAMMABILITY RATING UL 94- HB (HOUSING), UL 94-V0 (CONTACT CARRIERS) POWER RATING 7-1/2 HP THREADED ENTRY 1-1/2 INCH NPT AH MODEL
$
399.60
Qty:
Part #:CWDAH460P9W
- STRAIGHT TYPE NYLON PA6 MATERIAL 0.66 INCH MIN. CABLE OUTER DIAMETER 1.5 INCH MAX. CABLE OUTER DIAMETER 4 WIRE(S) UL 1682, UL 1686, CUL, CSA C22.2 APPROVAL 250 VAC 3-PHASE VOLTAGE RATING 60 AMPERE CURRENT RATING 3 POLE(S) WATERTIGHT ARROW HART[R] BRAND APPLICABLE STANDARD IEC 60309-1/60309-2 FLAMMABILITY RATING UL 94- HB (HOUSING), UL 94-V0 (CONTACT CARRIERS) AH MODEL
$
362.60
Qty:
Part #:CWDAH460R7W
- NYLON PA6 MATERIAL 4 WIRE(S) UL 1682, UL 1686, CSA C22.2 APPROVAL 480 VAC 3-PHASE VOLTAGE RATING 60 AMPERE CURRENT RATING 3 POLE(S) WATERTIGHT ARROW HART[R] BRAND APPLICABLE STANDARD IEC 60309-1/60309-2 FLAMMABILITY RATING UL 94- HB (HOUSING), UL 94-V0 (CONTACT CARRIERS) AH MODEL
$
389.24
Qty:
$
325.60
Qty:
$
413.66
Qty:
Part #:CWDAHMC240C
- Man Cont 2Pos DPST 40A 600VAC Clamp BK 3653884
$
90.50
Qty:
Part #:G1H012
- 1-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.625 INCH IMC/RIGID CONDUIT USED ON 500 STANDARD PACKAGE 1/2 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.17
Qty:
Part #:G1H034
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.75 INCH IMC/RIGID CONDUIT USED ON 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.30
Qty:
Part #:G2H034
- 2-HOLE, SNAP-ON, RIBBED TYPE 20 GAUGE ZINC ELECTROPLATED COLD ROLLED STEEL MATERIAL 0.688 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 250 STANDARD PACKAGE 3/4 INCH TRADE SIZE 0.188 INCH HOLE/BOLT SIZE
$
0.19
Qty:
Part #:G1H100
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.875 INCH IMC/RIGID CONDUIT USED ON 200 STANDARD PACKAGE 1 INCH TRADE SIZE 0.312 INCH HOLE/BOLT SIZE
$
0.45
Qty:
Part #:G1H114
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.875 INCH IMC/RIGID CONDUIT USED ON 100 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE 0.375 INCH HOLE/BOLT SIZE
$
0.68
Qty:
Part #:G1H112
- 1-HOLE, SNAP-ON, RIBBED TYPE 11 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 1 INCH IMC/RIGID CONDUIT USED ON 100 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 0.437 INCH HOLE/BOLT SIZE
$
1.01
Qty:
Part #:G1H200
- 1-HOLE, SNAP-ON, RIBBED TYPE 11 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 1.125 INCH IMC/RIGID CONDUIT USED ON 50 STANDARD PACKAGE 2 INCH TRADE SIZE 0.562 INCH HOLE/BOLT SIZE
$
1.02
Qty:
Part #:G1H300
- 1-HOLE TYPE 5-3/16 INCH 1-3/4 INCH IMC/RIGID CONDUIT USED ON UL APPROVAL 5 STANDARD PACKAGE 3 INCH TRADE SIZE 9/16 INCH HOLE/BOLT SIZE
$
2.25
Qty:
Displaying: 1 - 24 of 38 Matching Items