Conduit
Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To
View:
Active Filters :
- Application: Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To Conduit Paint Stores, Hair Salons, Retail Stores and Print Shops Supports Emt Conduit to Mounting Surface
Part #:CUTTP432
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (8) 3/4 INCH SIDE KNOCKOUT SIZE 12 KNOCKOUT(S) (4) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
8.09
Qty:
Part #:CUTTP451
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (6) 1/2 INCH SIDE, (3) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (4) BOTTOM, (9) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.75
Qty:
$
2.39
Qty:
$
3.56
Qty:
$
3.38
Qty:
$
4.89
Qty:
$
4.89
Qty:
Part #:CUTTP423
- WELDED STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 22 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH, 3/4 INCH) ECCENTRIC BOTTOM, (6) 1/2 INCH SIDE, (3) (1/2 INCH, 3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (4) BOTTOM, (9) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FED SPEC W-J-800E, NEMA OS-1
$
3.05
Qty:
Part #:CUTTP557
- DRAWN STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VS BRACKET MOUNTING 25 STANDARD PACKAGE 42 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (5) 1/2 INCH SIDE, (4) 3/4 INCH CONCENTRIC SIDE KNOCKOUT SIZE 14 KNOCKOUT(S) (5) BOTTOM, (9) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
16.13
Qty:
Part #:E1H012
- 1-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.562 INCH EMT CONDUIT USED ON UL APPROVAL 1000 STANDARD PACKAGE 1/2 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.12
Qty:
Part #:E1H100
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.75 INCH EMT CONDUIT USED ON UL APPROVAL 500 STANDARD PACKAGE 1 INCH TRADE SIZE 0.312 INCH HOLE/BOLT SIZE
$
0.27
Qty:
Part #:E1H114
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.875 INCH EMT CONDUIT USED ON 200 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE 0.312 INCH HOLE/BOLT SIZE
$
0.44
Qty:
Part #:E1H112
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 1 INCH EMT CONDUIT USED ON 100 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 0.312 INCH HOLE/BOLT SIZE
$
0.95
Qty:
Part #:E1H200
- 1-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 1.125 INCH EMT CONDUIT USED ON 100 STANDARD PACKAGE 2 INCH TRADE SIZE 0.375 INCH HOLE/BOLT SIZE
$
0.95
Qty:
Part #:E2H034
- 2-HOLE, SNAP-ON, RIBBED TYPE 20 GAUGE ZINC ELECTROPLATED COLD ROLLED STEEL MATERIAL 0.625 INCH EMT CONDUIT USED ON UL (CANADA AND US) APPROVAL 500 STANDARD PACKAGE 3/4 INCH TRADE SIZE 0.188 INCH HOLE/BOLT SIZE
$
0.15
Qty:
Part #:E2H100
- 2-HOLE, SNAP-ON, RIBBED TYPE 20 GAUGE ZINC ELECTROPLATED COLD ROLLED STEEL MATERIAL 0.688 INCH EMT CONDUIT USED ON UL (CANADA AND US) APPROVAL 250 STANDARD PACKAGE 1 INCH TRADE SIZE 0.188 INCH HOLE/BOLT SIZE
$
0.25
Qty:
Part #:E2H114
- 2-HOLE, SNAP-ON, RIBBED TYPE 18 GAUGE GALVANIZED STEEL MATERIAL 0.75 INCH EMT CONDUIT USED ON UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.72
Qty:
Part #:E2H200
- 2-HOLE, SNAP-ON, RIBBED TYPE 20 GAUGE ZINC ELECTROPLATED COLD ROLLED STEEL MATERIAL 0.56 INCH EMT CONDUIT USED ON UL (CANADA AND US) APPROVAL 500 STANDARD PACKAGE 1/2 INCH TRADE SIZE 0.188 INCH HOLE/BOLT SIZE
$
0.66
Qty:
Part #:CUTTP403
- WELDED STEEL MATERIAL 4 INCH 4 WIDTH IN INCH 4 INCH 4 HEIGHT IN INCH 2-1/8 INCH 2.125 DEPTH IN INCH UL 514-A, UL 514-B, UL 514-C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH CONDUIT BOTTOM, (2) (1/2 INCH - 3/4 INCH) CONDUIT ECCENTRIC KNOCKOUT BOTTOM, (8) 1/2 INCH CONDUIT SIDES, (4) (1/2 INCH - 3/4 INCH) CONDUIT ECCENTRIC KNOCKOUT SIDES KNOCKOUT SIZE 16 KNOCKOUT(S) (4) BOTTOM, (12) SIDE KNOCKOUT LOCATION COOPER CROUSE-HINDS. BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION #W-J-800E, NEMA OS-1 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN
$
2.43
Qty:
$
14.77
Qty:
Part #:E1H034
- 1-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.625 INCH EMT CONDUIT USED ON UL APPROVAL 500 STANDARD PACKAGE 3/4 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.16
Qty:
Part #:E2H112
- 2-HOLE, SNAP-ON, RIBBED TYPE 18 GAUGE GALVANIZED STEEL MATERIAL 0.875 INCH EMT CONDUIT USED ON UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.45
Qty:
Part #:CUTTP469
- WELDED STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 22 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (6) 3/4 INCH SIDE KNOCKOUT SIZE 11 KNOCKOUT(S) (5) BOTTOM, (6) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
5.12
Qty:
Part #:CUTTP521
- WELDED STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 44 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (12) (1/2 INCH-3/4 INCH) CONCENTRIC SIDE KNOCKOUT SIZE 16 KNOCKOUT(S) (4) BOTTOM, (12) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
9.40
Qty:
Displaying: 1 - 24 of 61 Matching Items