Supports Rigid/imc Conduit to Mounting Surface
Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To
View:
Active Filters :
- Application: Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To Supports Rigid/imc Conduit to Mounting Surface Tap Connector / Grounding Connector Utility Box
Part #:G1H012
- 1-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE ZINC ELECTROPLATED STEEL MATERIAL 0.625 INCH IMC/RIGID CONDUIT USED ON 500 STANDARD PACKAGE 1/2 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.17
Qty:
Part #:G2H012
- 2-HOLE, SNAP-ON, RIBBED TYPE 20 GAUGE ZINC ELECTROPLATED COLD ROLLED STEEL MATERIAL 0.625 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 500 STANDARD PACKAGE 1/2 INCH TRADE SIZE 0.188 INCH HOLE/BOLT SIZE
$
0.11
Qty:
Part #:G2H100
- 2-HOLE, SNAP-ON, RIBBED TYPE 18 GAUGE ZINC ELECTROPLATED COLD ROLLED STEEL MATERIAL 0.75 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 125 STANDARD PACKAGE 1 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.36
Qty:
Part #:G2H114
- 2-HOLE, SNAP-ON, RIBBED TYPE 18 GAUGE GALVANIZED STEEL MATERIAL 0.875 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.46
Qty:
Part #:G2H112
- 2-HOLE, SNAP-ON, RIBBED TYPE 16 GAUGE GALVANIZED STEEL MATERIAL 0.875 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 1-1/2 INCH TRADE SIZE 0.25 INCH HOLE/BOLT SIZE
$
0.55
Qty:
Part #:G2H200
- 2-HOLE, SNAP-ON, RIBBED TYPE 16 GAUGE GALVANIZED STEEL MATERIAL 1 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 2 INCH TRADE SIZE 0.375 INCH HOLE/BOLT SIZE
$
0.77
Qty:
Part #:G2H212
- 2-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE GALVANIZED STEEL MATERIAL 1 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 50 STANDARD PACKAGE 2-1/2 INCH TRADE SIZE 0.375 INCH HOLE/BOLT SIZE
$
0.88
Qty:
Part #:G2H300
- 2-HOLE, SNAP-ON, RIBBED TYPE 14 GAUGE GALVANIZED STEEL MATERIAL 1 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 25 STANDARD PACKAGE 3 INCH TRADE SIZE 0.375 INCH HOLE/BOLT SIZE
$
1.43
Qty:
Part #:G2H400
- 2-HOLE, SNAP-ON, RIBBED TYPE 13 GAUGE GALVANIZED STEEL MATERIAL 1 INCH IMC/RIGID CONDUIT USED ON UL (CANADA AND US) APPROVAL 20 STANDARD PACKAGE 4 INCH TRADE SIZE 0.437 INCH HOLE/BOLT SIZE
$
1.94
Qty:
Part #:CUTTP588
- UTILITY TYPE STEEL MATERIAL 2-1/8 INCH 2.125 WIDTH IN INCH 4 INCH 4 HEIGHT IN INCH 1-1/2 INCH 1.5 DEPTH IN INCH 1 GANG(S) UL 514-A, UL 514-B, UL 514-C APPROVAL 50 STANDARD PACKAGE 10.3 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (8) 1/2 INCH SIDES KNOCKOUT SIZE 11 KNOCKOUT(S) (3) BOTTOM, (8) SIDE KNOCKOUT LOCATION COOPER CROUSE-HINDS. BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN
$
1.47
Qty:
Part #:CUTTP594
- UTILITY TYPE STEEL MATERIAL 2-1/8 INCH 4 INCH 1-7/8 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL 50 STANDARD PACKAGE 13 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (8) 1/2 INCH SIDE KNOCKOUT SIZE 11 KNOCKOUT(S) (3) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
1.82
Qty:
Part #:CUTTP596
- UTILITY TYPE STEEL MATERIAL 2-1/8 INCH 4 INCH 1-7/8 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL 50 STANDARD PACKAGE 13 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (6) 3/4 INCH SIDE KNOCKOUT SIZE 9 KNOCKOUT(S) (3) BOTTOM, (6) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
4.10
Qty:
Part #:CUTTP604
- UTILITY TYPE STEEL MATERIAL 2-1/8 INCH 4 INCH 2-1/8 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL 50 STANDARD PACKAGE 14.5 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (8) 1/2 INCH SIDE KNOCKOUT SIZE 11 KNOCKOUT(S) (3) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
2.30
Qty:
Part #:CUTTP592
- STEEL MATERIAL 2-1/8 INCH 4 INCH 1-1/2 INCH 1 GANG(S) UL APPROVAL 50 STANDARD PACKAGE 10.3 CU INCH CAPACITY (8) 1/2 INCH KNOCKOUT SIZE 8 KNOCKOUT(S) (8) SIDE KNOCKOUT LOCATION
$
6.02
Qty:
Part #:ENY-2M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 3/4 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-9/32 INCH TURNING RADIUS HUBBELL[R] BRAND ENY MODEL
$
29.33
Qty:
Part #:ENY-1M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE THREADED, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 1/2 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-3/16 INCH TURNING RADIUS OVERALL DIMENSION 3-15/16 INCH H ENY MODEL
$
24.98
Qty:
Part #:KLRKENY-3M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 1 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-13/32 INCH TURNING RADIUS HUBBELL[R] BRAND ENY MODEL
$
37.73
Qty:
Part #:KLRKENY-4M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP C D, CLASS I ZONE 1 GROUP IIA IIB, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 1-1/4 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-25/32 INCH TURNING RADIUS HUBBELL[R] BRAND ENY MODEL
$
46.14
Qty:
Part #:KILLENY-5M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE THREADED, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 1-1/2 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 1-29/32 INCH TURNING RADIUS OVERALL DIMENSION 5-11/16 INCH H ENY MODEL
$
69.40
Qty:
Part #:KILLENY-6M
- HUB TYPE ELECTROZINC CHROMATE SEALANT ELECTROSTATICALLY APPLIED POWDER COATED DURALOY IRON MATERIAL FEMALE THREADED, FEMALE CONNECTION TYPE UL, CSA APPROVAL CLASS I DIV 1 AND 2 GROUP A B C D, CLASS I ZONE 1 GROUP IIA IIB IIC, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE 2 INCH TRADE SIZE HORIZONTAL/VERTICAL MOUNTING POSITION 2-5/16 INCH TURNING RADIUS OVERALL DIMENSION 6-3/8 INCH H ENY MODEL
$
89.98
Qty:
Part #:CUTTP608
- FLAT TYPE STEEL MATERIAL CSA APPROVAL 100 STANDARD PACKAGE BLANK OPENING TYPE COOPER CROUSE-HINDS. BRAND
$
0.72
Qty:
Part #:CUTTP610
- FLAT TYPE STEEL MATERIAL 1 GANG(S) UL, CSA APPROVAL 100 STANDARD PACKAGE (1) 1-19/32 INCH DIA, 20 TO 30 AMPERE TWIST LOCKING RECEPTACLE OPENING TYPE USED ON UTILITY BOX
$
2.75
Qty:
Part #:CUTTP612
- FLAT TYPE STEEL MATERIAL 1 GANG(S) UL, CSA APPROVAL 100 STANDARD PACKAGE (1) 1-13/32 INCH DIA RECEPTACLE OPENING TYPE USED ON UTILITY BOX
$
0.83
Qty:
Displaying: 1 - 24 of 35 Matching Items