Conduit
Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To
View:
Active Filters :
- Application: Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To Conduit Connects Two Lengths of Emt Conduit Reduces the Size of Knockout Holes
Part #:RW212X200
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 2 INCH SMALL END TRADE SIZE 2-1/2 INCH LARGE END TRADE SIZE 500 STANDARD PACKAGE
$
2.99
Qty:
Part #:RW300X034
- REDUCING WASHER TYPE STEEL MATERIAL GALVANIZED FINISH 3/4 INCH SMALL END TRADE SIZE 3 INCH LARGE END TRADE SIZE 3/4 SMALL END TRADE SIZE - FRACTIONAL 3 LARGE END TRADE SIZE - FRACTIONAL .75 SMALL END TRADE SIZE IN INCH 3 LARGE END TRADE SIZE IN INCH 250 PER CARTON STANDARD PACKAGE LARGE END TRADE SIZE IN INCH - UOM IN SMALL END TRADE SIZE IN INCH - UOM IN MR MODEL
$
3.23
Qty:
Part #:RW300X114
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 1-1/4 INCH SMALL END TRADE SIZE 3 INCH LARGE END TRADE SIZE 250 STANDARD PACKAGE
$
3.81
Qty:
Part #:RW300X200
- REDUCING WASHER TYPE GALVANIZED STEEL MATERIAL 2 INCH SMALL END TRADE SIZE 3 INCH LARGE END TRADE SIZE 250 STANDARD PACKAGE
$
3.81
Qty:
Part #:CUTTP423
- WELDED STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 22 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH, 3/4 INCH) ECCENTRIC BOTTOM, (6) 1/2 INCH SIDE, (3) (1/2 INCH, 3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (4) BOTTOM, (9) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FED SPEC W-J-800E, NEMA OS-1
$
3.05
Qty:
Part #:CUTTP557
- DRAWN STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VS BRACKET MOUNTING 25 STANDARD PACKAGE 42 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (5) 1/2 INCH SIDE, (4) 3/4 INCH CONCENTRIC SIDE KNOCKOUT SIZE 14 KNOCKOUT(S) (5) BOTTOM, (9) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
16.13
Qty:
Part #:STSSCP212
- SET SCREW, EMT TYPE STEEL MATERIAL EMT CONDUIT USED ON UL (CANADA AND US), UL 514B APPROVAL 8 STANDARD PACKAGE 2-1/2 INCH TRADE SIZE CONCRETE-TIGHT
$
5.83
Qty:
Part #:STSSCP300
- SET SCREW, EMT TYPE STEEL MATERIAL EMT CONDUIT USED ON UL (CANADA AND US), UL 514B APPROVAL 4 STANDARD PACKAGE 3 INCH TRADE SIZE CONCRETE-TIGHT
$
7.20
Qty:
Part #:STCMCP012
- COMPRESSION TYPE STEEL MATERIAL EMT CONDUIT USED ON UL, UL 514B APPROVAL 250 STANDARD PACKAGE 1/2 INCH TRADE SIZE CONCRETE-TIGHT
$
0.62
Qty:
Part #:STCMCP200
- COMPRESSION TYPE STEEL MATERIAL EMT CONDUIT USED ON UL, UL 514B APPROVAL 10 STANDARD PACKAGE 2 INCH TRADE SIZE CONCRETE-TIGHT
$
4.64
Qty:
Part #:STCMCP300
- COMPRESSION TYPE STEEL MATERIAL EMT CONDUIT USED ON UL, UL 514B APPROVAL 4 STANDARD PACKAGE 3 INCH TRADE SIZE CONCRETE-TIGHT
$
16.94
Qty:
Part #:CUTTP403
- WELDED STEEL MATERIAL 4 INCH 4 WIDTH IN INCH 4 INCH 4 HEIGHT IN INCH 2-1/8 INCH 2.125 DEPTH IN INCH UL 514-A, UL 514-B, UL 514-C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH CONDUIT BOTTOM, (2) (1/2 INCH - 3/4 INCH) CONDUIT ECCENTRIC KNOCKOUT BOTTOM, (8) 1/2 INCH CONDUIT SIDES, (4) (1/2 INCH - 3/4 INCH) CONDUIT ECCENTRIC KNOCKOUT SIDES KNOCKOUT SIZE 16 KNOCKOUT(S) (4) BOTTOM, (12) SIDE KNOCKOUT LOCATION COOPER CROUSE-HINDS. BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION #W-J-800E, NEMA OS-1 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN
$
2.43
Qty:
Part #:STSSCP400
- SET SCREW, EMT TYPE STEEL MATERIAL EMT CONDUIT USED ON UL (CANADA AND US), UL 514B APPROVAL 4 STANDARD PACKAGE 4 INCH TRADE SIZE CONCRETE-TIGHT
$
9.21
Qty:
Part #:STCMCP034
- COMPRESSION TYPE STEEL MATERIAL EMT CONDUIT USED ON UL, UL 514B APPROVAL 125 STANDARD PACKAGE 3/4 INCH TRADE SIZE CONCRETE-TIGHT
$
0.90
Qty:
Part #:STCMCP100
- COMPRESSION TYPE STEEL MATERIAL EMT CONDUIT USED ON UL, UL 514B APPROVAL 75 STANDARD PACKAGE 1 INCH TRADE SIZE CONCRETE-TIGHT
$
1.47
Qty:
Part #:STCMCP114
- COMPRESSION TYPE STEEL MATERIAL EMT CONDUIT USED ON UL, UL 514B APPROVAL 20 STANDARD PACKAGE 1-1/4 INCH TRADE SIZE CONCRETE-TIGHT
$
2.50
Qty:
Part #:STCMCP212
- COMPRESSION TYPE STEEL MATERIAL EMT CONDUIT USED ON UL, UL 514B APPROVAL 8 STANDARD PACKAGE 2-1/2 INCH TRADE SIZE CONCRETE-TIGHT
$
16.32
Qty:
Part #:STCMCP400
- COMPRESSION TYPE STEEL MATERIAL EMT CONDUIT USED ON UL, UL 514B APPROVAL 4 STANDARD PACKAGE 4 INCH TRADE SIZE CONCRETE-TIGHT
$
28.04
Qty:
Part #:CUTTP469
- WELDED STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 22 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (6) 3/4 INCH SIDE KNOCKOUT SIZE 11 KNOCKOUT(S) (5) BOTTOM, (6) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
5.12
Qty:
Part #:CUTTP521
- WELDED STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 44 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (12) (1/2 INCH-3/4 INCH) CONCENTRIC SIDE KNOCKOUT SIZE 16 KNOCKOUT(S) (4) BOTTOM, (12) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
9.40
Qty:
Part #:CUTTP408
- DRAWN STEEL MATERIAL 4 INCH 4 INCH 1-1/4 INCH UL 514A/514B/514C APPROVAL 50 STANDARD PACKAGE 18 CU INCH CAPACITY (5) 1/2 INCH BOTTOM, (12) 1/2 INCH SIDE KNOCKOUT SIZE 17 KNOCKOUT(S) (5) BOTTOM, (12) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
7.26
Qty:
Part #:CUTTP436
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (8) 1 INCH SIDE KNOCKOUT SIZE 12 KNOCKOUT(S) (4) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.04
Qty:
Part #:CUTTP404
- WELDED STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL 514A/514B/514C APPROVAL 50 STANDARD PACKAGE 22 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (8) 1/2 INCH SIDE, (4) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 16 KNOCKOUT(S) (4) BOTTOM, (12) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
2.00
Qty:
Part #:CUTTP410
- DRAWN TYPE STEEL MATERIAL 4 INCH 1.5 INCH 4 INCH UL APPROVAL 50 STANDARD PACKAGE 22 CUBIC INCH CAPACITY (5) 1/2 INCH BOTTOM, (12) 1/2 INCH SIDE KNOCKOUT SIZE 17 KNOCKOUT(S) (5) BOTTOM, (12) SIDE KNOCKOUT LOCATION APPLICATION CONDUIT
$
2.09
Qty:
Displaying: 25 - 48 of 75 Matching Items