Conduit
Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To
View:
Active Filters :
- Application: Class I, Divisions 1 and 2: The Purpose of Seals in a Class I Hazardous Location Is to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames From One Electrical Installation to Another Through the Conduit System. Seals Are Required To Conduit Gfci Tap Connector / Grounding Connector Used With Locknut to Protect Conductors in Threaded Rigid/imc Conduit Entering a Box
Part #:CWDTRSGFH20GY
- GFCI TR HG Self Test Duplex 20A 125V GY 4740084
$
38.35
Qty:
Part #:CWDSGFH20V
- DUPLEX TYPE NYLON (TOP HOUSING), POLYCARBONATE (BOTTOM HOUSING) MATERIAL IVORY COLOR 5-20R CONFIGURATION 3 WIRE(S) HOSPITAL GRADE UL (CANADA AND US), UL 498, UL 943, CSA, NOM 426 APPROVAL 125 VAC VOLTAGE RATING 20 AMPERE CURRENT RATING 2 POLE(S) BACK, SIDE WIRING WIRE SIZE 14 TO 10 AWG TEMPERATURE RATING -35 TO 66 DEG C FLAMMABILITY RATING UL 94 V-2
$
36.64
Qty:
Part #:CWDSGFH20W
- DUPLEX TYPE NYLON (TOP HOUSING), POLYCARBONATE (BOTTOM HOUSING) MATERIAL WHITE COLOR 5-20R CONFIGURATION 3 WIRE(S) HOSPITAL GRADE UL (CANADA AND US), UL 498, UL 943, CSA, NOM 426 APPROVAL 125 VAC VOLTAGE RATING 20 AMPERE CURRENT RATING 2 POLE(S) BACK, SIDE WIRING ARROW HART[R] BRAND WIRE SIZE 14 TO 10 AWG TEMPERATURE RATING -35 TO 66 DEG C FLAMMABILITY RATING UL 94 V-2 SGFH MODEL
$
36.64
Qty:
Part #:CWDTWRSGF20GY
- GFCI TWR Self Test Duplex 20A 125V GY 4743009
$
31.23
Qty:
Part #:CWDSGF20GY
- DUPLEX TYPE POLYPROPYLENE (TOP HOUSING), PVC (BOTTOM HOUSING) MATERIAL GRAY COLOR 5-20R CONFIGURATION 3 WIRE(S) SPECIFICATION GRADE UL (CANADA AND US), UL 498, UL 943, NOM 426, CSA APPROVAL 125 VAC VOLTAGE RATING 20 AMPERE CURRENT RATING 2 POLE(S) BACK, SIDE WIRING WIRE SIZE 14 TO 10 AWG TEMPERATURE RATING -35 TO 66 DEG C FLAMMABILITY RATING UL 94 V-2
$
26.92
Qty:
Part #:CUTTP432
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (8) 3/4 INCH SIDE KNOCKOUT SIZE 12 KNOCKOUT(S) (4) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
8.09
Qty:
Part #:CUTTP451
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (6) 1/2 INCH SIDE, (3) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (4) BOTTOM, (9) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.75
Qty:
Part #:CB012
- DIE CAST ZINC MATERIAL RIGID CONDUIT USED ON UL APPROVAL 1000 PER CARTON STANDARD PACKAGE 1/2 INCH TRADE SIZE CB MODEL
$
0.78
Qty:
Part #:CB034
- DIE-CAST ZINC MATERIAL IMC/RIGID CONDUIT USED ON UL 514B APPROVAL 1000 STANDARD PACKAGE 3/4 INCH TRADE SIZE NON-INSULATED THROAT TYPE
$
1.06
Qty:
Part #:CB100
- DIE CAST ZINC MATERIAL RIGID CONDUIT USED ON UL APPROVAL 500 PER CARTON STANDARD PACKAGE 1 INCH TRADE SIZE CB MODEL
$
5.47
Qty:
Part #:CB114
- DIE CAST ZINC MATERIAL RIGID CONDUIT USED ON UL APPROVAL 250 PER CARTON STANDARD PACKAGE 1-1/4 INCH TRADE SIZE CB MODEL
$
4.04
Qty:
Part #:CB200
- DIE-CAST ZINC MATERIAL IMC/RIGID CONDUIT USED ON UL 514B APPROVAL 100 STANDARD PACKAGE 2 INCH TRADE SIZE NON-INSULATED THROAT TYPE
$
9.99
Qty:
Part #:CB212
- DIE-CAST ZINC MATERIAL IMC/RIGID CONDUIT USED ON UL 514B APPROVAL 100 STANDARD PACKAGE 2-1/2 INCH TRADE SIZE NON-INSULATED THROAT TYPE
$
10.50
Qty:
Part #:CB300
- DIE CAST ZINC MATERIAL RIGID CONDUIT USED ON UL APPROVAL 100 PER CARTON STANDARD PACKAGE 3 INCH TRADE SIZE CB MODEL
$
14.38
Qty:
Part #:CB400
- DIE CAST ZINC MATERIAL RIGID CONDUIT USED ON UL APPROVAL 50 PER CARTON STANDARD PACKAGE 4 INCH TRADE SIZE CB MODEL
$
33.47
Qty:
Part #:CUTTP423
- WELDED STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 22 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH, 3/4 INCH) ECCENTRIC BOTTOM, (6) 1/2 INCH SIDE, (3) (1/2 INCH, 3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 13 KNOCKOUT(S) (4) BOTTOM, (9) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FED SPEC W-J-800E, NEMA OS-1
$
3.05
Qty:
Part #:CUTTP557
- DRAWN STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL VS BRACKET MOUNTING 25 STANDARD PACKAGE 42 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (5) 1/2 INCH SIDE, (4) 3/4 INCH CONCENTRIC SIDE KNOCKOUT SIZE 14 KNOCKOUT(S) (5) BOTTOM, (9) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
16.13
Qty:
Part #:CUTTP403
- WELDED STEEL MATERIAL 4 INCH 4 WIDTH IN INCH 4 INCH 4 HEIGHT IN INCH 2-1/8 INCH 2.125 DEPTH IN INCH UL 514-A, UL 514-B, UL 514-C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH CONDUIT BOTTOM, (2) (1/2 INCH - 3/4 INCH) CONDUIT ECCENTRIC KNOCKOUT BOTTOM, (8) 1/2 INCH CONDUIT SIDES, (4) (1/2 INCH - 3/4 INCH) CONDUIT ECCENTRIC KNOCKOUT SIDES KNOCKOUT SIZE 16 KNOCKOUT(S) (4) BOTTOM, (12) SIDE KNOCKOUT LOCATION COOPER CROUSE-HINDS. BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION #W-J-800E, NEMA OS-1 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN
$
2.43
Qty:
Part #:CUTTP469
- WELDED STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL 514A/514B/514C APPROVAL VMS BRACKET MOUNTING 25 STANDARD PACKAGE 22 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (6) 3/4 INCH SIDE KNOCKOUT SIZE 11 KNOCKOUT(S) (5) BOTTOM, (6) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
5.12
Qty:
Part #:CUTTP521
- WELDED STEEL MATERIAL 4-11/16 INCH 4-11/16 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 44 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) 3/4 INCH BOTTOM, (12) (1/2 INCH-3/4 INCH) CONCENTRIC SIDE KNOCKOUT SIZE 16 KNOCKOUT(S) (4) BOTTOM, (12) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
9.40
Qty:
Part #:CUTTP408
- DRAWN STEEL MATERIAL 4 INCH 4 INCH 1-1/4 INCH UL 514A/514B/514C APPROVAL 50 STANDARD PACKAGE 18 CU INCH CAPACITY (5) 1/2 INCH BOTTOM, (12) 1/2 INCH SIDE KNOCKOUT SIZE 17 KNOCKOUT(S) (5) BOTTOM, (12) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
7.26
Qty:
Part #:CUTTP436
- WELDED STEEL MATERIAL 4 INCH 4 INCH 2-1/8 INCH UL 514A/514B/514C APPROVAL 25 STANDARD PACKAGE 30.3 CU INCH CAPACITY (2) 1/2 INCH BOTTOM (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (8) 1 INCH SIDE KNOCKOUT SIZE 12 KNOCKOUT(S) (4) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
3.04
Qty:
Part #:CUTTP404
- WELDED STEEL MATERIAL 4 INCH 4 INCH 1-1/2 INCH UL 514A/514B/514C APPROVAL 50 STANDARD PACKAGE 22 CU INCH CAPACITY (2) 1/2 INCH BOTTOM, (2) (1/2 INCH-3/4 INCH) ECCENTRIC BOTTOM, (8) 1/2 INCH SIDE, (4) (1/2 INCH-3/4 INCH) ECCENTRIC SIDE KNOCKOUT SIZE 16 KNOCKOUT(S) (4) BOTTOM, (12) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
2.00
Qty:
Displaying: 25 - 48 of 76 Matching Items