Combination Conduit Bodies Lr-Type
Ionization Smoke Alarm


Displaying: 1 - 2 of 2 Matching Items
2 Items
View:
Part #:KIDI12010S
The Kidde i12010S is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with sealed-in lithium battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home. The i12010S contains a 10-year tamper proof battery that eliminates the need for battery replacement, and ends worry over unauthorized battery removal. The alarm provides continuous protection from smoke and fire, even during power outages. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. The customer can use a simple tool such as a screwdriver to deactivate the unit, stopping the chirp and making it safe for disposal. The end of life signal can be temporarily silenced to allow for replacement at a more convenient time. Easy Installation Battery backup automatically activates when the alarm is attached to mounting bracket. Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections. Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip. Fewer Callbacks 10-year sealed battery substitutes need for routine 9V replacement. Large centrally located Test/Hush&reg alarm control button silences nuisance alarms for approximately 9 minutes. Dust cover protects sensor from contaminates during construction, reducing nuisance alarms. User-Friendly Features Red LED indicates alarm mode, Green LED indicates AC power is present. Interconnectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user guide for complete instructions. End of Life Hush feature allows user to temporarily silence end of life chirp 3 days at a time for a maximum of 30 day life extension. Technical Specifications Model i12010S Power Source 120VAC (60 Hz, 45mA Max) Sensor Ionization Audio Alarm 85dB at 10ft Temperature Range 40F (4.4C) to 100F (37.8C) Humidity Range Up to 95% relative humidity (RH), non-condensing Size 5.5&rdquo in diameter x 1.75&rdquo depth Weight .45lbs Interconnects Up to 24 Kidde devices Warranty 10 year limited
$ 25.86
Qty:
add to cart
Part #:900CUAR
Description The Kidde KN-COSM-IBA uses breakthrough technology to offer a fast response to real fires, including smoldering and fast-flaming, as well as protect you from carbon monoxide and dramatically reduce the chance of nuisance alarms. The Intelligent sensor technology combines the detection capabilities of an ionization smoke sensor &ndash which is more likely to detect smaller, less visible fire particles, like those produced by flaming fires &ndash with that of an electrochemical sensor, which is used to detect CO. Since carbon monoxide is present in all fires, having both detection chambers work together in one alarm is a breakthrough in the fire safety industry. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one. This constant communication enhances the alarm&rsquos overall performance in all fires, and significantly reduces the potential for a nuisance alarm. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms. Alarm Warnings Fire The red LED will flash and be accompanied by three long alarm beeps followed by a verbal warning message &ldquoFIRE!&rdquo. The alarm pattern will repeat until smoke is eliminated. Carbon Monoxide Four short alarm beeps followed by a verbal warning &ldquoWARNING! CARBON MONOXIDE!&rdquo This continues until the unit is reset or the CO is eliminated. Low Battery One chirp followed by warning &ldquoLOW BATTERY.&rdquo The red LED light will flash. This pattern will continue every minute for at least seven days. Under battery power, the &ldquoLOW BATTERY&rdquo voice only occurs once every 15 minutes. Voice Hush Indication &ldquoHUSH MODE ACTIVATED&rdquo and &ldquoHUSH MODE CANCELLED&rdquo voice announcement. Peak Level Memory If the alarm had detected a CO level of 100ppm or higher when the Test/Reset button is pressed, the unit will announce &ldquoCARBON MONOXIDE PREVIOUSLY DETECTED&rdquo to warn of the CO incident. Smart Interconnect&trade- Interconnects up to 24 Kidde devices (of which 18 can be initiating). Battery Backup (2-AA batteries included)- Provides protection during power outages. Front Loading Battery Door- Replace the backup batteries without disconnecting from mounting bracket Battery Lockout System- The battery door will not close unless the batteries are properly installed. Alarm Tamper Resist- Helps deter from tampering and theft. Adjustable Mounting Bracket- Makes installation fast and easy. Works with existing smoke and combination smoke and CO mounting brackets. Peak Level Memory- Announces &ldquoCARBON MONOXIDE PREVIOUSLY DETECTED&rdquo if alarm has detected a CO level of 100ppm or higher since it was last reset. Hush&trade Feature- Silences nuisance alarms for approximately 9 minutes. (Smoke must be present before Hush&trade is activated) Ionization Sensor Technology- Ideal for detecting fast flaming and other types of fires. Test Button Functions&ndash Tests the unit for proper operation Peak Level memory Resets the Carbon Monoxide alarm Green LED- Illuminates to indicate the unit is receiving AC power. Flashes once every 60 seconds to indicate battery only mode. Flashes once per second during alarm to indicate initiating alarm. Flashes once every 16 seconds to indicate smoke or CO previously detected. Flashes every 2 seconds while the alarm is in HUSH&trade mode. Red LED- When a dangerous level of smoke or carbon monoxide is detected the red LED will flash. If the unit malfunctions, the red LED will flash and the unit will chirp every 30 seconds. Technical Specifications Model KN-COSM-IBA Power Source 120VAC, 60Hz 45mA max per alarm 2 AA battery backup SmokeSensor Ionization CoSensor Electrochemical Audio Alarm 85dB at 10ft Temperature Range 40F (4.4C) to 100F (37.8C) Humidity Range 10%-95% relative humidity, non-condensing Size 5.6&rdquo in diameter x 1.8&rdquo depth Weight 1 lb. Wiring Quick connect plug with 6&rdquo pigtails Interconnects Up to 24 Kidde devices (of which 18 can be initiating) Warranty 10 year limited
$ 37.34
Qty:
add to cart
 
Displaying: 1 - 2 of 2 Matching Items