Electronics
Commercial / Institutional Buildings / Structures - Power Distribution and Controls
View:
Active Filters :
Part #:CWDAHDS30
- NON-FUSED TYPE 8.75 INCH L X 5 INCH W X 5.68 INCH H SIZE PADLOCK HANDLE TYPE 3 PHASE(S) UL (CANADA AND US) APPROVAL CONTROL CIRCUIT APPLICATION 600 VAC VOLTAGE RATING NEMA 4X, 12, IP67 ENCLOSURE 30 AMPERE CURRENT RATING 3 POLE(S) 14 TO 10 AWG CONDUCTOR SIZE ROHS COMPLIANT MATERIAL THERMOPLASTIC
$
239.28
Qty:
$
383.04
Qty:
Part #:CWDAH7810UD
- 3-PHASE TYPE 1.69 INCH WIDTH X 1.75 INCH DEPTH X 3.28 INCH HEIGHT SIZE 3-POLE, 1-THROW OPERATION TYPE UL (CANADA AND US) APPROVAL 600 VOLT AC VOLTAGE RATING NEMA 1/3R/4X ENCLOSURE 30 AMP CURRENT RATING 7.5 HP AT 240 V 3 HP AT 120 V 15 HP AT 600 V 15 HP AT 480 V ROHS COMPLIANT WIRE SIZE 10 AWG APPLICATION INDUSTRIAL WIRING POSITION FRONT CONSTRUCTIONAL FEATURE CORROSION RESISTANCE
$
141.52
Qty:
$
137.58
Qty:
$
103.30
Qty:
Part #:CWDAH6810U
- 1-PHASE TYPE GLASS-FILLED NYLON MATERIAL 1.69 INCH W X 1.75 INCH D X 3.81 INCH H SIZE DPST OPERATION TYPE UL (CANADA AND US) APPROVAL 600 VAC VOLTAGE RATING 30 AMPERE CURRENT RATING 5 HP HP AT 240 V 2 HP HP AT 120 V 7.5 HP HP AT 600 V 7.5 HP HP AT 480 V ARROW HART[R] BRAND TERMINATION STYLE FRONT WIRED SCREW WIRE SIZE 10 AWG ROHS COMPLIANT NAFTA COMPLIANT
$
94.34
Qty:
Part #:KLE32314
-
14-in-1 Precision Screwdriver/ Nut Driver
32314
Precision screwdriver and integrated nut drivers include 14 of the most common sizes in one tool
Spin cap offers optimum and precise control
Industrial-strength heat treated bits
Cushion-Grip handle for maximum comfort
Includes sizes Phillips #00, #0 Slotted 3/32-Inch, 1/8-Inch Tamperproof Torx® T7, T8, T10, T15 Hex 9/64-Inch, 5/32-Inch, 3/16-Inch, 7/32-Inch, 1/4-Inch, 5/16-Inch
Interchangeable steel shaft for fast, easy bit changes
Sizes are etched into integrated barrels and bits
TORX® is a registered trademark of Acument Intellectual Properties, LLC
Part #:KLE32614
- Multi-Bit Electronics Pocket Screwdriver, 4-in-1, Ph, Sl Bits, Electronics screwdriver with concealable tips and a pocket clip for easy pocket storage
Part #:KLE32717
-
All-in-1 Precision Screwdriver Set with Case
32717
Precision screwdriver set includes 39 bits for various applications including repair of most Apple® products
Powerful magnets inside barrel to better retain bits, as well as pick-up and hold fasteners
Reversible barrel has standard and extended-reach ends
Compact carrying case features a stay-shut latch and extra-long bits for easier access
Spin cap offers optimum and precise control
Industrial-strength heat treated bits
Cushion-Grip handles for maximum comfort
Apple® is registered trademarks of Apple Inc TORX® is a registered trademark of Acument Intellectual Properties, LLC Tri-Wing® is a registered trademark of Phillips Screw Company
Part #:CUTTP608
- FLAT TYPE STEEL MATERIAL CSA APPROVAL 100 STANDARD PACKAGE BLANK OPENING TYPE COOPER CROUSE-HINDS. BRAND
$
0.72
Qty:
Part #:CUTTP613
- FLAT TYPE STEEL MATERIAL 1 GANG(S) UL, CSA APPROVAL 100 STANDARD PACKAGE (1) GFCI RECEPTACLE OPENING TYPE USED ON UTILITY BOX
$
1.02
Qty:
Part #:CUTTP618
- FLAT TYPE STEEL MATERIAL 1 GANG(S) CSA APPROVAL 100 STANDARD PACKAGE (1) TOGGLE SWITCH OPENING TYPE COOPER CROUSE-HINDS. BRAND
$
0.79
Qty:
Part #:CUTTP610
- FLAT TYPE STEEL MATERIAL 1 GANG(S) UL, CSA APPROVAL 100 STANDARD PACKAGE (1) 1-19/32 INCH DIA, 20 TO 30 AMPERE TWIST LOCKING RECEPTACLE OPENING TYPE USED ON UTILITY BOX
$
2.75
Qty:
Part #:CUTTP612
- FLAT TYPE STEEL MATERIAL 1 GANG(S) UL, CSA APPROVAL 100 STANDARD PACKAGE (1) 1-13/32 INCH DIA RECEPTACLE OPENING TYPE USED ON UTILITY BOX
$
0.83
Qty:
Part #:CUTTP614
- FLAT TYPE STEEL MATERIAL 2.125 INCH 0.25 INCH 1 GANG(S) UL, CSA APPROVAL 100 STANDARD PACKAGE (1) 1/2 INCH KNOCKOUT OPENING TYPE COOPER CROUSE-HINDS BRAND USED ON UTILITY BOX
$
0.75
Qty:
Part #:CUTTP616
- FLAT TYPE STEEL MATERIAL 1 GANG(S) CSA APPROVAL 100 STANDARD PACKAGE (1) DUPLEX RECEPTACLE OPENING TYPE COOPER CROUSE-HINDS. BRAND
$
0.83
Qty:
Part #:CUTTP588
- UTILITY TYPE STEEL MATERIAL 2-1/8 INCH 2.125 WIDTH IN INCH 4 INCH 4 HEIGHT IN INCH 1-1/2 INCH 1.5 DEPTH IN INCH 1 GANG(S) UL 514-A, UL 514-B, UL 514-C APPROVAL 50 STANDARD PACKAGE 10.3 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (8) 1/2 INCH SIDES KNOCKOUT SIZE 11 KNOCKOUT(S) (3) BOTTOM, (8) SIDE KNOCKOUT LOCATION COOPER CROUSE-HINDS. BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN
$
1.47
Qty:
Part #:CUTTP594
- UTILITY TYPE STEEL MATERIAL 2-1/8 INCH 4 INCH 1-7/8 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL 50 STANDARD PACKAGE 13 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (8) 1/2 INCH SIDE KNOCKOUT SIZE 11 KNOCKOUT(S) (3) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
1.82
Qty:
Part #:CUTTP596
- UTILITY TYPE STEEL MATERIAL 2-1/8 INCH 4 INCH 1-7/8 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL 50 STANDARD PACKAGE 13 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (6) 3/4 INCH SIDE KNOCKOUT SIZE 9 KNOCKOUT(S) (3) BOTTOM, (6) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
2.93
Qty:
Part #:CUTTP604
- UTILITY TYPE STEEL MATERIAL 2-1/8 INCH 4 INCH 2-1/8 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL 50 STANDARD PACKAGE 14.5 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (8) 1/2 INCH SIDE KNOCKOUT SIZE 11 KNOCKOUT(S) (3) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
2.30
Qty:
Part #:CUTTP592
- STEEL MATERIAL 2-1/8 INCH 4 INCH 1-1/2 INCH 1 GANG(S) UL APPROVAL 50 STANDARD PACKAGE 10.3 CU INCH CAPACITY (8) 1/2 INCH KNOCKOUT SIZE 8 KNOCKOUT(S) (8) SIDE KNOCKOUT LOCATION
$
6.02
Qty:
Displaying: 1 - 23 of 23 Matching Items