Enlight
Commercial / Institutional Buildings / Structures - Power Distribution and Controls
View:
Active Filters :
Part #:ARLMB8
- 8" round mounting block. With built in electrical box for fan and fixture installations. For interior or exterior use. Fan rated up to 70lbs, fixture rated up to 200lbs.
$
23.15
Part #:ARLFB415
- FAN/FIXTURE TYPE 0.5 INCH .5 DEPTH IN INCH 4.25 DIAMETER IN INCH ROUND SHAPE 25 APPROVAL 4.25 INCH DIAMETER BRACKET MOUNTING UL, CSA STANDARD PACKAGE 10.3 CU INCH CAPACITY APPLICATION 1/2 INCH OR 5/8 INCH DRYWALL
$
7.29
Qty:
Part #:ARLFB426
- CEILING MOUNTING ARLINGTON BRAND OVERALL DIMENSION 4.25 INCH WIDTH X 6.25 INCH HEIGHT INCLUDES READY TO TIGHTEN CENTER SCREW, INSTALLED NON-METALLIC CABLE CONNECTOR, MUD COVER, SECOND KNOCKOUT AND (2) SCREW FOR FAN/FIXTURE BRACKET INSTALLATION USED ON 1/2 TO 5/8 INCH DRYWALL CEILING WI
$
10.30
Part #:ARLFB423
- FAN/FIXTURE TYPE 1.25 INCH 1.25 DEPTH IN INCH 4.25 DIAMETER IN INCH ROUND SHAPE 25 APPROVAL 4.25 INCH DIAMETER BRACKET MOUNTING UL, CSA STANDARD PACKAGE 19.3 CU INCH CAPACITY APPLICATION 1/2 INCH OR 5/8 INCH DRYWALL
$
9.12
$
21.73
Part #:ARLFB450
- CEILING FAN/FIXTURE TYPE 0.7881 INCH .7881 DEPTH IN INCH 3.875 DIAMETER IN INCH ROUND SHAPE 6 APPROVAL 3.875 INCH DIAMETER BRACKET MOUNTING UL, CSA STANDARD PACKAGE 14.5 CU INCH CAPACITY SIZE 7.88 INCH L X 7.88 INCH W X 9.73 H DEPTH IN INCH - UOM IN DIAMETER IN INCH - UOM IN
$
36.89
Part #:ARLFB900
- CEILING MOUNTING OVERALL DIMENSION 7.881 INCH WIDTH X 7.881 INCH HEIGHT FINISH TEXTURED/PAINTABLE INCLUDES MOUNTING BLOCK, BUILT-IN ELECTRIC BOX, NM94 CABLE CONNECTOR, (2) SCREW USED ON 80 DEGREE OR GREATER CATHEDRAL CEILING APPROVAL UL, CSA
$
31.36
Part #:CWDOS306UBK
- SENSOR WITH RELAY TYPE 1.55 INCH WIDTH X 1.85 INCH DEPTH X 2.6 INCH HEIGHT SIZE BLACK FINISH UL (CANADA AND US), NOM 426 APPROVAL INDOOR APPLICATION 120 VOLT AC VOLTAGE RATING WALL MOUNTING 600 WATT AT 120 VOLT AC AT 60 HERTZ (INCANDESCENT), 600 WATT AT 120 VOLT AC AT 60 HERTZ (FLUORESCENT), 1/4 HP AT 120 V (MOTOR) LOAD RATING 180 DEGREE FIELD OF VIEW PASSIVE INFRARED SENSOR TYPE 450 SQUARE FOOT AREA COVERAGE INCANDESCENT/FLUORESCENT/MOTOR LOAD TYPE 5 TO 30 MINUTE TIME DELAY ROHS COMPLIANT CALIFORNIA TITLE 24 COMPLIANT MATERIAL INJECTION MOLDED POLYCARBONATE RESIN HOUSING, REINFORCED TAMPER RESISTANT FRESNEL LENS WIRING TYPE 1-POLE/3 WAY TEMPERATURE RATING 32 TO 104 DEG F
$
37.84
Qty:
$
58.47
Qty:
Part #:CUTTP608
- FLAT TYPE STEEL MATERIAL CSA APPROVAL 100 STANDARD PACKAGE BLANK OPENING TYPE COOPER CROUSE-HINDS. BRAND
$
0.72
Qty:
Part #:CUTTP613
- FLAT TYPE STEEL MATERIAL 1 GANG(S) UL, CSA APPROVAL 100 STANDARD PACKAGE (1) GFCI RECEPTACLE OPENING TYPE USED ON UTILITY BOX
$
1.02
Qty:
Part #:CUTTP618
- FLAT TYPE STEEL MATERIAL 1 GANG(S) CSA APPROVAL 100 STANDARD PACKAGE (1) TOGGLE SWITCH OPENING TYPE COOPER CROUSE-HINDS. BRAND
$
0.79
Qty:
Part #:CUTTP610
- FLAT TYPE STEEL MATERIAL 1 GANG(S) UL, CSA APPROVAL 100 STANDARD PACKAGE (1) 1-19/32 INCH DIA, 20 TO 30 AMPERE TWIST LOCKING RECEPTACLE OPENING TYPE USED ON UTILITY BOX
$
2.75
Qty:
Part #:CUTTP612
- FLAT TYPE STEEL MATERIAL 1 GANG(S) UL, CSA APPROVAL 100 STANDARD PACKAGE (1) 1-13/32 INCH DIA RECEPTACLE OPENING TYPE USED ON UTILITY BOX
$
0.83
Qty:
Part #:CUTTP614
- FLAT TYPE STEEL MATERIAL 2.125 INCH 0.25 INCH 1 GANG(S) UL, CSA APPROVAL 100 STANDARD PACKAGE (1) 1/2 INCH KNOCKOUT OPENING TYPE COOPER CROUSE-HINDS BRAND USED ON UTILITY BOX
$
0.75
Qty:
Part #:CUTTP616
- FLAT TYPE STEEL MATERIAL 1 GANG(S) CSA APPROVAL 100 STANDARD PACKAGE (1) DUPLEX RECEPTACLE OPENING TYPE COOPER CROUSE-HINDS. BRAND
$
0.83
Qty:
Part #:CUTTP588
- UTILITY TYPE STEEL MATERIAL 2-1/8 INCH 2.125 WIDTH IN INCH 4 INCH 4 HEIGHT IN INCH 1-1/2 INCH 1.5 DEPTH IN INCH 1 GANG(S) UL 514-A, UL 514-B, UL 514-C APPROVAL 50 STANDARD PACKAGE 10.3 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (8) 1/2 INCH SIDES KNOCKOUT SIZE 11 KNOCKOUT(S) (3) BOTTOM, (8) SIDE KNOCKOUT LOCATION COOPER CROUSE-HINDS. BRAND APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1 DEPTH IN INCH - UOM IN HEIGHT IN INCH - UOM IN WIDTH IN INCH - UOM IN
$
1.47
Qty:
Part #:CUTTP594
- UTILITY TYPE STEEL MATERIAL 2-1/8 INCH 4 INCH 1-7/8 INCH 1 GANG(S) UL 514A/514B/514C APPROVAL 50 STANDARD PACKAGE 13 CU INCH CAPACITY (3) 1/2 INCH BOTTOM, (8) 1/2 INCH SIDE KNOCKOUT SIZE 11 KNOCKOUT(S) (3) BOTTOM, (8) SIDE KNOCKOUT LOCATION APPLICABLE STANDARD FEDERAL SPECIFICATION W-J-800E, NEMA OS-1
$
1.82
Qty:
Displaying: 1 - 24 of 28 Matching Items